1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Xigmatek HDT-S1283V Dark Knight 120mm PWM CPU Cooler. Please read this manual thoroughly before proceeding with installation to ensure proper function and to prevent damage to your components. Keep this manual for future reference.
2. Product Overview
The Xigmatek HDT-S1283V Dark Knight is a high-performance CPU cooler designed to efficiently dissipate heat from your desktop processor. It features Heat-Pipe Direct Touch (HDT) technology, where three 8mm copper heat pipes directly contact the CPU for improved thermal transfer. The cooler is equipped with a 120mm PWM fan, which includes noise-dampening rubber mounts to reduce vibration and noise. The fan also features 4 white LEDs for visual enhancement. The heatsink fins and heat pipes are finished in piano black for a sleek appearance.

Figure 2.1: Xigmatek HDT-S1283V Dark Knight CPU Cooler with 120mm PWM fan.
Key Features:
- Heat-Pipe Direct Touch (HDT) technology with three 8mm copper heat pipes.
- 120mm PWM fan for optimized airflow and noise control.
- Integrated noise-dampening rubber fan mounts.
- Piano black finish on fins and heat pipes.
- 4 white LEDs on the fan.
- Universal compatibility for various Intel and AMD sockets.
3. Package Contents
Upon unpacking, please verify that all components are present and undamaged. The package should contain:
- Xigmatek HDT-S1283V Dark Knight CPU Cooler assembly (heatsink with pre-installed 120mm PWM fan)
- Mounting hardware for Intel Socket 775 / Core i7 (LGA1366)
- Mounting hardware for AMD Socket K8 (754/939/940) / AM2 / AM2+ / AM3
- Thermal paste
- User Manual (this document)
Note: Specific mounting brackets may vary slightly based on the revision. Refer to the included hardware for exact components.
4. Setup and Installation
Before beginning installation, ensure your computer is powered off and unplugged from the wall outlet. It is recommended to work on a clean, static-free surface.
4.1. Preparation
- Remove your motherboard from the PC case if necessary to access the CPU socket area.
- Clean the CPU surface thoroughly with isopropyl alcohol to remove any old thermal paste or residue. Ensure the surface is dry before proceeding.
- Identify the correct mounting hardware for your CPU socket type (Intel LGA775/1366 or AMD K8/AM2/AM3).
4.2. Applying Thermal Paste
Apply a small amount of thermal paste (approximately the size of a pea) to the center of the CPU's integrated heat spreader (IHS). Do not spread the paste manually; the pressure from the cooler will distribute it evenly.
4.3. Cooler Mounting
Follow the specific instructions for your CPU socket type:
For Intel Sockets (LGA775/1366):
- Attach the appropriate Intel mounting brackets to the base of the cooler using the provided screws.
- Position the cooler over the CPU, aligning the mounting holes on the brackets with the holes around the CPU socket on the motherboard.
- Secure the cooler by tightening the screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug. Do not overtighten.
For AMD Sockets (K8/AM2/AM3):
- Attach the appropriate AMD mounting clips to the base of the cooler.
- Hook one side of the cooler's mounting clip onto the retention bracket on your motherboard.
- Apply gentle, even pressure to the opposite side of the cooler and hook the second clip onto the motherboard retention bracket. Ensure the cooler is firmly seated and does not wobble.
4.4. Fan Connection
Connect the 4-pin PWM fan cable from the cooler to the 'CPU_FAN' header on your motherboard. Ensure the connector is fully seated.
5. Operating Instructions
Once installed, the Xigmatek HDT-S1283V Dark Knight CPU Cooler operates automatically. The PWM (Pulse Width Modulation) function allows your motherboard to control the fan speed based on CPU temperature, providing optimal cooling performance while minimizing noise.
- Ensure adequate airflow within your PC case by maintaining proper cable management and ensuring case fans are correctly oriented.
- Monitor CPU temperatures using motherboard monitoring software to confirm effective cooling, especially during high-load tasks.
6. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your CPU cooler.
- Dust Removal: Periodically (every 3-6 months, or more frequently in dusty environments) power off your computer and use compressed air to blow dust out of the heatsink fins and fan blades. Hold the fan blades gently to prevent them from spinning rapidly during cleaning, which can damage the fan motor.
- Fan Inspection: Check the fan for any signs of wear, unusual noise, or reduced rotational speed. If the fan is failing, it may need to be replaced.
- Thermal Paste: While not typically required frequently, if you remove the cooler for any reason, you must clean off the old thermal paste from both the CPU and cooler base and apply new thermal paste before reinstallation.
7. Troubleshooting
If you encounter issues with your CPU cooler, refer to the following common problems and solutions:
- High CPU Temperatures:
- Ensure the cooler is securely mounted and making full contact with the CPU.
- Verify that thermal paste was applied correctly and evenly.
- Check that the fan is spinning and connected to the 'CPU_FAN' header.
- Clean any dust accumulation from the heatsink and fan.
- Ensure adequate case airflow.
- Fan Not Spinning:
- Check the 4-pin fan connection to the motherboard's 'CPU_FAN' header.
- Verify fan settings in your motherboard's BIOS/UEFI.
- Inspect the fan cable for damage.
- Excessive Fan Noise:
- Clean the fan blades and heatsink for dust.
- Ensure the fan is securely mounted and not vibrating against other components.
- Check fan settings in BIOS/UEFI; adjust fan curve if necessary.
- If noise persists and is a grinding sound, the fan bearing may be failing and require replacement.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | HDT-S1283V (DARK KNIGHT-S1283V) |
| Brand | Xigmatek |
| Cooling Method | Forced Air (Heat-Pipe Direct Touch) |
| Fan Size | 120mm |
| Fan Type | PWM |
| Maximum Rotational Speed | 1800 RPM |
| Noise Level | 30.1 dB (Max) |
| Power Connector Type | 4-Pin |
| Voltage | 12 Volts |
| Compatible Devices | Desktop |
| Item Weight | 2.03 pounds (approx. 921g) |
| Package Dimensions | 8.03 x 6.61 x 3.7 inches |
| Date First Available | January 30, 2010 |
9. Warranty and Support
For warranty information and technical support, please refer to the official Xigmatek website or contact your local retailer. Keep your proof of purchase for warranty claims.
For further assistance, you may visit the Xigmatek support page: www.xigmatek.com