Introduction
This manual provides instructions for the proper installation, use, and maintenance of your Goodmans EB17 Replacement Toothbrush Head. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.
Product Overview
The Goodmans EB17 Replacement Toothbrush Head is designed to replace both EB17 and EB15 brush heads. It is engineered for compatibility with various Braun Oral-B Plaque Removers, offering a reliable alternative for your oral hygiene routine.
Compatibility
This replacement brush head is compatible with the following Braun Oral-B models:
- ID2522
- D5000
- 4713, 4715, 4726, 4728, 4729, 4730, 4731, 4736
- D5011, D5025, D5525, D5545, D5595
- D7525, OC5525
- D9511, D9525, D9545, OC9525
- D15525, D15525X, OC15525X
- D17525
- And other compatible Braun Oral-B Plaque Removers.
Note: This is a replacement part not manufactured by Braun.
Image: The Goodmans EB17 Replacement Toothbrush Head, illustrating its design and connection point.
Setup
Attaching the Brush Head
- Ensure your electric toothbrush handle is clean and dry.
- Align the replacement brush head with the metal shaft on your toothbrush handle.
- Push the brush head down firmly until it clicks into place. A secure fit is essential for proper operation.
Operating
Using Your Toothbrush Head
- Wet the bristles and apply a small amount of toothpaste.
- Place the brush head against your teeth at a slight angle towards the gum line.
- Turn on your electric toothbrush.
- Guide the brush head slowly from tooth to tooth, allowing the brush to clean each tooth surface for a few seconds. Do not scrub aggressively.
- Brush all surfaces of your teeth (outer, inner, and chewing surfaces).
- After brushing, turn off the toothbrush before removing it from your mouth.
Maintenance
Cleaning and Care
- After each use, rinse the brush head thoroughly under running water with the toothbrush handle still switched on for a few seconds.
- Remove the brush head from the handle and rinse both parts separately.
- Allow the brush head to air dry.
- Store the brush head in an upright position to promote drying and prevent bacterial growth.
Replacement Frequency
Dentists recommend replacing your toothbrush head every 3 months, or sooner if the bristles become frayed or worn. Worn bristles are less effective at cleaning teeth and may harbor more bacteria.
Troubleshooting
Common Issues and Solutions
- Brush head feels loose on the handle: Ensure the brush head is pushed down firmly until it clicks into place. If the issue persists, verify compatibility with your specific toothbrush model.
- Reduced brushing effectiveness: Check if the bristles are frayed or worn. Replace the brush head if necessary.
- Unusual noise during operation: Ensure the brush head is securely attached. If the noise continues, consult your toothbrush handle's manual or contact the manufacturer of your toothbrush handle.
Specifications
Product Specifications
- Brand: Goodmans
- Model: EB17 (Replacement)
- Replaces: EB17 and EB15 brush heads
- Compatibility: Fits all Braun Oral-B Plaque Removers (refer to compatibility list above)
- Number of Pieces: 1 (per pack)
- Age Range Description: Adult
- Item Form: Elliptical
- UPC: 744539000574
- ASIN: B00276TFCY
Warranty Information
Specific warranty details for this Goodmans EB17 Replacement Toothbrush Head are not provided. Please refer to the retailer's return policy or contact Goodmans customer support for further information regarding product defects or warranty claims.
Customer Support
For further assistance or inquiries regarding your Goodmans EB17 Replacement Toothbrush Head, please contact your retailer or visit the Goodmans official website for support information. Ensure you have your product details and purchase information available when contacting support.