Introduction
The Ansell Ringers Gloves R-27 Extrication Gloves are designed for demanding tasks such as firefighter operations and extrication jobs. These gloves provide superior protection, enhanced grip, and a comfortable fit, ensuring safety and performance in hazardous environments. Featuring cut-resistant materials, TPR impact protection, and high visibility, they are engineered to meet the rigorous demands of professionals handling heavy equipment and requiring reliable hand protection.
Image: Front and back view of the Ansell Ringers R-27 Extrication Gloves, highlighting their design and features.
Setup and Sizing
Proper sizing is crucial for optimal performance and protection. Refer to the sizing chart to determine the correct glove size for your hands.
Sizing Instructions:
- Place your hand flat on a surface.
- Measure the circumference of your hand around the knuckles, excluding the thumb.
- Measure the length from the tip of your middle finger to the base of your palm.
- Compare your measurements to the provided sizing chart to find the best fit.
Image: Detailed glove sizing chart, illustrating how to measure your hand for the correct fit.
Initial Inspection:
Before each use, visually inspect the gloves for any signs of damage, wear, or degradation. Check for tears, punctures, loose stitching, or compromised impact protection areas. Do not use damaged gloves.
Operating Instructions
The Ringers R-27 Extrication Gloves are designed for high-performance hand protection in demanding situations. Follow these guidelines for effective use:
- Secure Fit: Ensure the gloves fit snugly but comfortably, allowing for full dexterity. The extended cuff with gaiter closure helps keep debris out.
- Enhanced Grip: Utilize the ResQLoc Grip System on the palm and fingers for superior handling ability, especially in wet or oily conditions.
- Impact Protection: The Thermoplastic Rubber (TPR) impact protection on the top of the hands and full length of the fingers is designed to absorb and dissipate impact energy.
- Cut Resistance: These gloves are CE Rated cut level 3, providing significant protection against cuts and punctures from sharp objects. However, no glove is entirely cut-proof; exercise caution.
- Visibility: The highly visible materials enhance safety in low-light conditions or busy work environments.
Image: Detailed view of the gloves, illustrating key features such as the extended cuff, breathable and waterproof Hipora barrier, improved TPR design, and durable palm for cut protection.
Image: A firefighter demonstrating the use of Ringers Extrication Gloves during a cutting operation, highlighting their protective capabilities.
Maintenance and Care
Proper maintenance extends the life and effectiveness of your Ringers R-27 Extrication Gloves.
Cleaning:
- For general cleaning, wipe the gloves with a damp cloth and mild soap.
- For thorough cleaning, the gloves can be machine washed. Use cold water and a gentle cycle. Do not use bleach or harsh detergents.
- Rinse thoroughly to remove all soap residue.
Drying:
- Air dry the gloves away from direct heat or sunlight. Do not tumble dry.
- Ensure gloves are completely dry before storage to prevent mildew and material degradation.
Storage:
- Store gloves in a cool, dry place, away from extreme temperatures and direct sunlight.
- Avoid storing in compressed or folded positions that could permanently crease or damage the materials.
Troubleshooting
Here are some common observations and solutions for your Ringers R-27 Extrication Gloves:
- Gloves feel stiff: These gloves are built for durability and protection, which can make them feel stiff initially. Continued use will help break them in and improve flexibility.
- Hands get sweaty inside: Due to the protective barrier (e.g., Hipora barrier for waterproofing), moisture wicking from the inside can be limited. This is a common characteristic of highly protective gloves. Ensure gloves are fully dry before next use.
- Difficulty putting gloves back on when hands are sweaty: This can occur with any snug-fitting glove. Allow hands and gloves to dry completely before re-donning.
- Rubber sections appear stained: Some oils or liquids may slightly discolor the rubber sections. This is typically cosmetic and does not affect the glove's protective properties.
- Gloves feel warm in hot weather: The protective layers and durable materials can retain heat. This is normal for gloves designed for extreme conditions.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Ansell |
| Model Number | 327-10 |
| Product Dimensions | 14.2 x 5.8 x 2.1 inches |
| Item Weight | 9.6 ounces |
| Material | Rubber (primary component, likely refers to TPR/grip) |
| Color | Hi-vis |
| Special Feature | High Visibility |
| Manufacturer | Ringers Gloves |
| Date First Available | May 5, 2009 |
| CE Rating | Cut Level 3 |
Image: Visual representation of key attributes (Impact Protection, Reflective, Waterproof, High Visibility) and certifications (EN420, EN388, EN511).
Warranty and Support
For information regarding warranty coverage, product support, or to contact customer service, please refer to the official Ansell website or the retailer from whom the product was purchased. Keep your proof of purchase for any warranty claims.
For additional resources and product information, visit the Ansell Store on Amazon.
