1. Introduction
This manual provides essential information for the safe and effective use of your Panasonic SR-626SW Silver Oxide Battery. Please read these instructions carefully before use and retain them for future reference. This battery is designed for small electronic devices requiring stable voltage output, such as watches.
2. Safety Information
WARNING: Keep batteries out of reach of children. Swallowing can lead to serious injury or death. If swallowed, seek immediate medical attention.
- Do not recharge, disassemble, heat, or dispose of in fire. This may cause leakage, explosion, or fire.
- Do not short-circuit the battery.
- Do not insert the battery with incorrect polarity (+ and -).
- Do not mix old and new batteries, or different types of batteries.
- If battery fluid comes into contact with skin or eyes, immediately flush with plenty of water and seek medical attention.
- Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
3. Product Overview
The Panasonic SR-626SW is a high-quality silver oxide button cell battery, known for its stable voltage discharge and long shelf life. It is commonly used in watches and other small electronic devices.

Figure 3.1: Panasonic SR-626SW battery in its retail packaging. The packaging indicates it is a silver oxide battery, mercury-free, and equivalent to models 377, V377, SR66, and 37.

Figure 3.2: A close-up view of the Panasonic SR-626SW silver oxide battery, showing its compact button cell design.
Recommended Applications
This battery is suitable for a wide range of small electronic devices. Examples include:

Figure 3.3: Examples of devices that typically use this type of battery, such as remote controls, keyless entry fobs, electronic dictionaries, wristwatches, electronic toys, calculators, desk clocks, key lights, neck lights, digital thermometers, pedometers, and cameras.
4. Setup and Installation (Battery Replacement)
When replacing a battery in your device, follow these general steps:
- Identify Battery Compartment: Locate the battery compartment on your device. This often requires a small screwdriver or a specific tool for watches.
- Remove Old Battery: Carefully remove the old battery. Note its orientation (which side is facing up or down).
- Check Polarity: Observe the positive (+) and negative (-) markings inside the battery compartment and on the new battery. The positive side is typically the flat, wider side of the button cell.
- Insert New Battery: Insert the new Panasonic SR-626SW battery according to the correct polarity. Ensure it sits securely in the compartment.
- Close Compartment: Securely close the battery compartment.
- Test Device: Turn on your device to confirm the battery is installed correctly and functioning.

Figure 4.1: Illustration showing how to identify battery polarity. The flat, wider side is typically the positive (+) terminal, and the smaller, raised side is the negative (-) terminal.
5. Operating (Usage)
Once installed, the Panasonic SR-626SW battery will power your device. No specific operational steps are required for the battery itself. Ensure your device is used according to its own instruction manual.
6. Maintenance
For optimal performance and longevity:
- Store unused batteries in their original packaging in a cool, dry place at room temperature.
- Avoid storing batteries in direct sunlight or in areas with high humidity or extreme temperatures.
- Do not store batteries loosely in a drawer with metal objects (like coins or keys), as this can cause a short circuit.
- Remove depleted batteries from devices promptly to prevent potential leakage and damage.
7. Troubleshooting
If your device does not power on after battery replacement:
- Check Polarity: Ensure the battery is inserted with the correct positive (+) and negative (-) orientation.
- Battery Contact: Verify that the battery makes proper contact with the device's terminals. Gently clean contacts if there is any visible corrosion.
- Battery Type: Confirm that you are using the correct battery type (SR-626SW) as specified by your device's manufacturer.
- New Battery: Try a different new battery to rule out a defective cell.
- Device Issue: If the problem persists, the issue may be with the device itself, not the battery. Consult your device's manual or a qualified technician.
8. Specifications
| Feature | Specification |
|---|---|
| Battery Type | Silver Oxide |
| Model Number | SR-626SW |
| Voltage | 1.55 Volts |
| Weight | Approximately 10 grams |
| Recommended Use | Watches, small electronic devices |
| Mercury Content | Mercury-Free (0%) |
9. Disposal
This Panasonic SR-626SW battery is mercury-free, making it more environmentally friendly. However, all batteries should be disposed of responsibly:
- Do not dispose of batteries in household waste.
- Recycle batteries according to local regulations. Many retailers and municipal waste facilities offer battery recycling programs.
- To prevent short circuits during disposal, it is recommended to cover the battery terminals with tape.
10. Warranty and Support
Panasonic batteries are manufactured to high-quality standards. For information regarding warranty coverage for manufacturing defects, please refer to the warranty information provided by your retailer or visit the official Panasonic website.
For further assistance or inquiries, please contact Panasonic customer support through their official channels. You can find more information on the Panasonic Global Website.