Introduction
This manual provides instructions for the Skullcandy S7PIBN-BZ Pipe Speaker Dock. This portable speaker dock is designed for use with compatible MP3 players and smartphones, including iPod and iPhone devices, to enhance your audio experience.
Image: The Skullcandy Pipe Speaker Dock, a black cylindrical device with the Skullcandy logo, volume controls, and a docking slot visible on its top surface. A speaker grille with a skull logo is visible on one end.
Key features include:
- Portable design for easy transport.
- Compatibility with various MP3 players and smartphones via docking or auxiliary input.
- Dual power options: AC adapter or 4 AAA batteries.
- Integrated volume controls and remote functionality.
Setup
Powering the Device
The Skullcandy Pipe Speaker Dock can be powered in two ways:
- AC Power: Connect the provided AC adapter to the power input port on the speaker dock and then to a standard 100-volt wall outlet.
- Battery Power: For portable use, insert 4 AAA batteries into the battery compartment. Ensure correct polarity (+/-) when inserting batteries.
Connecting Your Device
- Docking: Carefully align your compatible iPod or iPhone with the 30-pin connector in the docking slot and gently push down until it is securely seated. The device should begin charging and playing audio automatically.
- Auxiliary Input: For other MP3 players or smartphones, connect a 3.5mm audio cable (not included) from your device's headphone jack to the auxiliary input port on the speaker dock.
Operating Instructions
Power On/Off
To power on the speaker dock, ensure it is connected to a power source (AC or batteries). There is typically a power button or the unit activates automatically upon docking a device. To power off, remove the docked device or disconnect power.
Volume Control
- On-Device Controls: Use the '+' and '-' buttons located on the speaker dock to adjust the volume.
- Remote Control: The included remote control allows for convenient volume adjustment from a distance. Point the remote towards the front of the speaker dock and use the volume buttons.
- Source Device: You can also adjust the volume directly on your docked or connected audio device.
Audio Playback
Once your device is connected and playing audio, the sound will be output through the speaker dock. Use your connected device to control playback functions such as play, pause, skip tracks, and select playlists.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the speaker dock. Avoid using liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, store the speaker dock in a cool, dry place. If using batteries, remove them to prevent leakage.
- Handling: Handle the device with care. Avoid dropping it or exposing it to extreme temperatures or moisture.
Troubleshooting
No Sound
- Ensure the speaker dock is powered on and connected to a power source.
- Verify that your audio device is securely docked or connected via the auxiliary input.
- Check the volume levels on both the speaker dock and your audio device.
- Confirm that audio is playing on your connected device.
"Device Not Compatible" Message
Some Apple devices, particularly older iPhone models, may display a "This accessory is not optimized to work with iPhone" or similar message when docked. This is a common notification and typically does not prevent the speaker dock from functioning. You can usually dismiss this message and continue using the device for audio playback and charging.
Volume Fluctuations
If the volume changes unexpectedly, ensure the remote control is not obstructed or accidentally activated. Check the docking connector for any debris and clean it gently with compressed air if necessary. Ensure the connection to your audio device is stable.
Specifications
| Feature | Detail |
|---|---|
| Model Name | Skullcandy Pipe |
| Model Number | S7PIBN-BZ |
| Speaker Type | Portable |
| Speaker Diameter | 35 Millimeters |
| Magnet Type | NdFeB |
| Frequency Range | 100-20K Hz |
| Impedance | 4000 Ohms |
| Max Input Power | 200mW |
| Power Source | AC 100 Volt, 4 AAA Batteries |
| Compatible Devices | MP3 Player, Smartphone (iPod, iPhone) |
| Connectivity Technology | Auxiliary, Docking |
| Control Method | Touch, Remote |
| Product Dimensions | 7.8 x 2 x 2 inches |
| Item Weight | 1 pound (16 ounces) |
| Color | Black |
| Indoor/Outdoor Usage | Indoor |
Warranty and Support
This product comes with a Full Warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the warranty card included with your purchase or contact Skullcandy customer support directly.
For further assistance or technical support, please visit the official Skullcandy website or contact their customer service department.
Note: The legal disclaimer states "no returns and a trac number for purchase". This refers to the seller's return policy at the time of purchase and does not supersede the manufacturer's product warranty.