ODM DD101-10

ODM DD101-10 Digital Quartz Watch User Manual

Comprehensive guide for setup, operation, maintenance, and troubleshooting.

1. Initial Setup

Your ODM DD101-10 digital watch comes with a pre-installed lithium metal battery. Before first use, ensure the watch is free from any protective films on the display or casing.

ODM DD101-10 watch packaging box

Image: The clear plastic packaging box for the ODM DD101-10 watch, featuring the brand logo and "NEVER TOO LATE" text.

To begin using your watch, simply press the side button to activate the display. The watch is designed for immediate use upon unboxing.

2. Operating Instructions

2.1. Reading the Digital Display

The ODM DD101-10 features a clear digital display. When activated, the time will be shown in a digital format. The display typically shows hours and minutes.

Close-up of ODM DD101-10 digital watch display showing time

Image: A close-up view of the purple ODM DD101-10 digital watch, highlighting its blue digital display showing the time.

2.2. Setting the Time

To set the time on your watch, locate the small button on the side of the watch casing. This button is typically used for all adjustments.

  1. Press and hold the side button until the display starts flashing, indicating it is in setting mode.
  2. While flashing, short press the button to advance the hours.
  3. Once the correct hour is set, press and hold the button again to switch to minute setting mode.
  4. Short press the button to advance the minutes.
  5. After setting the minutes, press and hold the button one last time to exit setting mode. The display will stop flashing and show the newly set time.

Note: Some models may require multiple short presses to cycle through hours, minutes, and potentially date or other settings. Refer to the specific button sequence for your model if the above does not apply.

ODM DD101-10 watch on a wrist

Image: The purple ODM DD101-10 digital watch worn on a wrist, showcasing its sleek design and how it appears when worn.

3. Care and Maintenance

Proper care will extend the life and appearance of your ODM DD101-10 watch.

  • Cleaning: Wipe the watch casing and strap with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the plastic.
  • Water Resistance: This watch is designed for daily wear but is generally not intended for swimming or showering. Avoid prolonged exposure to water.
  • Battery Replacement: When the display becomes dim or stops functioning, it may be time to replace the battery. This model uses a Lithium metal battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and function.
  • Storage: Store your watch in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

4. Troubleshooting Guide

If you encounter issues with your watch, refer to the table below for common problems and their solutions.

ProblemPossible Solution
Display is blank or dim.The battery may be low or depleted. Replace the lithium metal battery. Ensure the watch is not in a power-saving mode (if applicable, though not specified for this model).
Time is incorrect.The time may need to be reset. Follow the "Setting the Time" instructions in Section 2.2.
Buttons are unresponsive.Ensure the watch is not wet or dirty around the button area. If the issue persists after cleaning, the internal mechanism may require professional inspection.

5. Product Specifications

  • Model Number: DD101-10
  • Brand: ODM
  • Display Type: Digital
  • Movement Type: Quartz
  • Strap Material: Plastic (Violet)
  • Battery: 1 Lithium metal (included)
  • Approximate Package Dimensions: 15 x 11.8 x 11.4 cm
  • Approximate Package Weight: 50 grams

6. Warranty Information and Support

ODM products are manufactured to high quality standards. Specific warranty terms and conditions may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

For technical support, service, or further inquiries, please refer to the contact information provided with your purchase or visit the official ODM website. Information regarding spare parts availability is not provided at this time.

This manual is intended as a general guide. Specifications and features are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.