Introduction
This manual provides instructions for the assembly, operation, and maintenance of your SMEDBO FK606 Free Standing Toilet Roll Euro Holder. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
A polished stainless steel free-standing toilet roll holder with a round base and a vertical post supporting a horizontal arm for the toilet roll.
Safety Information
- Ensure the holder is placed on a stable, level surface to prevent tipping.
- Keep out of reach of small children to avoid accidental injury.
- Do not use abrasive cleaners or materials that could scratch the polished stainless steel finish.
- Periodically check all connections to ensure they remain secure.
Package Contents
Verify that all components are present before beginning assembly:
- 1 x Main Vertical Post
- 1 x Round Base
- 1 x Horizontal Toilet Roll Arm with Stopper
- Assembly Hardware (screws, washers, etc.)
Setup
The SMEDBO FK606 is designed for straightforward assembly. No specialized tools are typically required beyond a screwdriver (not included).
- Unpack all components from the packaging and verify against the package contents list.
- Attach the main vertical post to the round base using the provided screws and washers. Ensure the connection is firm and stable.
- Secure the horizontal toilet roll arm to the top of the vertical post. Tighten until it is firmly in place and does not rotate freely.
- Place the fully assembled toilet roll holder on a desired flat, stable surface in your bathroom.
This image illustrates the fully assembled toilet roll holder, showcasing its stable base and functional arm.
Operating Instructions
Using your SMEDBO FK606 Toilet Roll Holder is simple:
- To load a toilet paper roll, slide a standard-sized roll onto the horizontal arm.
- The integrated stopper at the end of the arm prevents the roll from sliding off during use.
- To replace an empty roll, simply slide the empty cardboard core off the arm and place a new roll on.
Maintenance
To maintain the polished finish and extend the life of your toilet roll holder:
- Clean the polished stainless steel surface regularly with a soft, damp cloth.
- For stubborn marks or fingerprints, use a mild, non-abrasive stainless steel cleaner. Apply the cleaner to a soft cloth, wipe the surface, and then immediately wipe dry with a clean, dry cloth to prevent water spots.
- Do not use harsh chemicals, abrasive pads, scouring agents, or acidic cleaners, as these can permanently damage the finish.
Troubleshooting
| Issue | Solution |
|---|---|
| Holder feels unstable or wobbly. | Ensure all assembly screws are tightened securely. Verify the holder is placed on a flat, even surface. |
| Finish appears dull or stained. | Clean with a soft cloth and a specialized stainless steel cleaner. Avoid leaving water to dry on the surface. |
Specifications
| Feature | Detail |
|---|---|
| Brand | SMEDBO |
| Model Number | SME_FK606 |
| Material | Stainless Steel |
| Finish Type | Stainless-Steel Polished |
| Color | Stainless Steel Polished |
| Installation Type | Free Standing |
| Product Dimensions (H x W x D) | 24" x 7" x 7" |
| Style | Round |
| Item Weight | 8 Pounds |
| Manufacturer | Smedbo |
Warranty Information
SMEDBO products are manufactured to high-quality standards. For specific warranty details, including coverage and duration, please refer to the documentation included with your purchase or visit the official SMEDBO website for the most current information.
Customer Support
For further assistance, technical support, or any inquiries regarding your SMEDBO FK606 Toilet Roll Holder, please visit the official SMEDBO website. You will find contact information and additional resources there.
