BenQ G2411HD

Download PDF
Contents

BenQ G2411HD Full-HD 24-inch TFT Monitor User Manual

Introduction

This manual provides essential information for the safe and efficient use of your BenQ G2411HD Full-HD 24-inch TFT Monitor. Please read these instructions thoroughly before operating the device and retain them for future reference.

Safety Information

  • Ensure the monitor is placed on a stable, level surface to prevent accidental falls.
  • Do not block ventilation openings. Proper airflow is essential to prevent overheating.
  • Use only the power adapter supplied with the monitor.
  • Avoid exposing the monitor to moisture or extreme temperatures.
  • Do not attempt to service the monitor yourself. Refer all servicing to qualified personnel.

Package Contents

Please check that all items are present in the package:

  • BenQ G2411HD Monitor
  • Monitor Stand (Base and Neck)
  • Power Cord
  • VGA (D-Sub) Cable
  • DVI-D Cable
  • User Manual (this document)

Note: Other cables (e.g., HDMI) may be included depending on your region or retailer.

Setup

1. Stand Assembly

  1. Carefully place the monitor face down on a soft, clean cloth to prevent scratches.
  2. Attach the stand neck to the monitor's rear panel, ensuring it clicks securely into place or is fastened with screws if provided.
  3. Attach the stand base to the bottom of the stand neck, securing it with the captive screw.
  4. Gently lift the monitor and place it upright on a stable surface.

2. Connecting Cables

Connect the necessary cables to the corresponding ports on the back of the monitor and your computer.

Rear view of BenQ G2411HD monitor showing input ports

Figure 1: Rear view of the BenQ G2411HD monitor, illustrating the various input ports including D-Sub, DVI-D, HDMI, and the power input. The stand attachment point is also visible.

  • Power Cable: Connect the power cord to the monitor's power input and then to a grounded electrical outlet.
  • Video Cables: Choose one of the following connections:
    • HDMI: Connect an HDMI cable from your computer's HDMI output to the monitor's HDMI input.
    • DVI-D: Connect a DVI-D cable from your computer's DVI-D output to the monitor's DVI-D input.
    • D-Sub (VGA): Connect a D-Sub cable from your computer's VGA output to the monitor's D-Sub input.
  • Audio (Optional): If your computer has an audio output and you wish to use the monitor's headphone jack, connect an audio cable from your computer's audio output to the monitor's audio input (if available, or use the headphone jack for output).

Operating the Monitor

1. Powering On/Off

Press the power button located on the front or bottom right bezel of the monitor to turn it on or off. The power indicator light will illuminate when the monitor is on.

Front view of BenQ G2411HD monitor showing OSD buttons

Figure 2: Front view of the BenQ G2411HD monitor, highlighting the location of the On-Screen Display (OSD) control buttons on the lower right bezel.

2. On-Screen Display (OSD) Menu Navigation

The OSD menu allows you to adjust various monitor settings. Use the buttons on the monitor's bezel to navigate:

  • Press the Menu button to open the OSD menu.
  • Use the Up/Down or Left/Right arrow buttons to navigate through menu options.
  • Press the Enter or Select button to confirm a selection or enter a sub-menu.
  • Press the Exit or Back button to return to the previous menu or exit the OSD.

3. Input Source Selection

If you have multiple devices connected to the monitor, you can switch between input sources:

  • Press the Input or Source button (often labeled with an arrow or specific icon) to cycle through available inputs (HDMI, DVI-D, D-Sub).
  • Alternatively, access the OSD menu and navigate to the 'Input' or 'Source' section to manually select your desired input.

4. Picture Adjustments

Within the OSD menu, you can fine-tune the display settings:

  • Brightness: Adjusts the overall luminance of the screen.
  • Contrast: Controls the difference between the lightest and darkest areas of the image.
  • Color Temperature: Select from presets like Reddish, Normal, Bluish, or a User mode for custom color balance.
  • Resolution: Ensure your computer's display settings match the monitor's native resolution of 1920x1080 for optimal image clarity.
  • Flicker-Free Technology: This monitor incorporates Flicker-Free technology to reduce eye strain during extended use. No user adjustment is typically required for this feature.

Maintenance

Cleaning the Monitor

  • Always turn off and unplug the monitor before cleaning.
  • Use a soft, lint-free cloth lightly dampened with water or a non-abrasive screen cleaner.
  • Do not spray cleaner directly onto the screen.
  • Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the screen or casing.

Troubleshooting

If you encounter issues with your BenQ G2411HD monitor, refer to the following common problems and solutions:

  • No Power:
    • Check if the power cord is securely connected to both the monitor and the electrical outlet.
    • Ensure the power outlet is functioning correctly.
    • Press the power button on the monitor.
  • No Image/Blank Screen:
    • Verify that the video cable (HDMI, DVI-D, or D-Sub) is securely connected to both the monitor and your computer.
    • Ensure the correct input source is selected on the monitor (refer to 'Input Source Selection' above).
    • Check if your computer is powered on and not in sleep mode.
    • Test the monitor with another video source or cable if possible.
  • Poor Image Quality (Blurry, Distorted, Incorrect Colors):
    • Ensure your computer's display resolution is set to the monitor's native resolution (1920x1080).
    • Adjust brightness, contrast, and color temperature settings via the OSD menu.
    • If using a D-Sub (VGA) connection, perform an 'Auto Adjustment' from the OSD menu to optimize the image.
    • Check for bent pins on the video cable connectors.

If the problem persists after trying these steps, contact BenQ customer support for further assistance.

Specifications

FeatureSpecification
BrandBenQ
Model NameG2411HD
Screen Size24 Inches
Resolution1920 x 1080 (Full HD 1080p)
Aspect Ratio16:9
Display TechnologyTFT LCD
Brightness300 cd/m²
Contrast Ratio1000:1 (Static), 40000:1 (Dynamic)
Response Time5 ms (GtG), 2 ms (GtG, specific modes)
Viewing Angle170° (Horizontal) / 160° (Vertical)
Input Connectors1x HDMI 1.3, 1x DVI-D, 1x D-Sub (VGA)
Horizontal Frequency24 ~ 83 KHz
Vertical Frequency50 ~ 76 Hz
Power Consumption49W (Operating), 1W (Power Saving Mode)
Special FeaturesFlicker-Free Technology
Item Weight6.32 Kilograms

Warranty and Support

BenQ monitors are covered by a limited warranty. Please refer to the warranty card included with your product or visit the official BenQ website for detailed warranty terms and conditions specific to your region.

For technical support, driver downloads, or service inquiries, please visit the official BenQ support website or contact their customer service department.

BenQ Official Website: www.benq.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.