Gentex GEC3-24WW

Download PDF
Contents

Gentex GEC3-24WW Evacuation Horn & Strobe User Manual

Comprehensive guide for the installation, operation, and maintenance of your Gentex GEC3-24WW Selectable Candela Low Profile Evacuation Horn & Strobe.

1. Product Overview

The Gentex Commander3 Series GEC3-24WW is a low-profile horn strobe combination designed to provide dependable audible and visual alarms. It features the lowest current available for its class, ensuring efficient operation. This model is equipped with a minimal operating current and maintains a minimum flash rate of 1Hz, regardless of the input voltage.

Key features include:

  • Prewire Entire System, Then Install Your Signals
  • Ease of Supervision Testing (Super-Slide)
  • Checkmate Feature: Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for High or Low Frequency (1500-3000Hz)
  • Switch for Temporal 3, Chime, or Whoop Tones
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using Gentex Synchronization Module
Gentex GEC3-24WW Evacuation Horn & Strobe, off-white faceplate with a clear strobe light at the top and a speaker grill below, and 'FIRE' written vertically on the left side.
Figure 1: Front view of the Gentex GEC3-24WW Evacuation Horn & Strobe. This device features an off-white faceplate, a clear strobe light housing at the top, and a circular speaker grill below it. The word "FIRE" is printed vertically in red on the left side of the unit.

2. Setup and Installation

Proper installation is crucial for the reliable operation of the GEC3-24WW. This device is designed for indoor use only and is not listed for outdoor applications.

2.1 Pre-wiring and Mounting

The system allows for pre-wiring of the entire system before the signals are installed. This simplifies the installation process. The unit comes with a standard 4-inch metal mounting plate that incorporates the SuperSlide feature, enabling easy testing for supervision.

  • Mounting: The product can be surface mounted using the Gentex Surface Mount Box (GSB).
  • Secure Locking: A locking mechanism secures the product to the bracket without any visible screws, ensuring a clean and tamper-resistant installation.

2.2 Wiring Connections

The input terminals are compatible with 12 to 18 AWG wiring. Ensure all connections are secure and follow local electrical codes and fire safety regulations.

  • Voltage Verification: Utilize the Checkmate Feature for instant voltage verification during installation.
  • Power Requirements: The unit operates on 24VDC.

3. Operating Instructions

The Commander3 Series horn offers various customizable tones and settings, easily adjustable in the field by a professional using integrated switches.

3.1 Tone Selection

The horn can produce a continuous tone or a synchable temporal three tone. Additionally, it supports 2400Hz and mechanical tones, a chime, and a whoop tone.

  • Tone Type: Use the internal switches to select between Temporal 3, Chime, or Whoop tones.
  • Frequency: Adjust the frequency between 1500Hz and 3000Hz using the dedicated switch.
  • dBA Level: Select between high or low dBA output for the horn.

3.2 Synchronization

To ensure synchronized operation of multiple strobe and/or horn units, use a Gentex Synchronization Module. This module ensures all connected devices flash and sound in unison, which is critical for effective alarm signaling.

Note: Gentex does not recommend using a coded or pulsing signaling circuit with any of its strobe products, as this may interfere with proper strobe operation.

4. Maintenance

The Gentex GEC3-24WW is designed for low maintenance. Regular inspection and testing are recommended to ensure continued functionality.

  • Visual Inspection: Periodically inspect the unit for any physical damage, loose connections, or obstructions to the speaker grill or strobe lens.
  • Functional Testing: Conduct routine functional tests as per local fire safety regulations and building codes to verify the horn and strobe are operating correctly.
  • Cleaning: If necessary, gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.

5. Troubleshooting

This section provides guidance for common issues you might encounter.

ProblemPossible CauseSolution
Strobe not flashing or flashing erratically
  • Incorrect wiring or loose connection.
  • Insufficient power supply (not 24VDC).
  • Using a coded or pulsing signaling circuit.
  • Verify all wiring connections are secure and correct.
  • Ensure the power supply is stable 24VDC.
  • Do not use coded or pulsing circuits with this strobe.
Horn not sounding or sounding incorrectly
  • Incorrect tone/dBA/frequency switch settings.
  • Speaker grill obstructed.
  • Wiring issue.
  • Check and adjust the internal tone, dBA, and frequency switches.
  • Clear any obstructions from the speaker grill.
  • Inspect wiring for damage or loose connections.
Unit not securing to mounting plate
  • Mounting plate not properly aligned.
  • Locking mechanism not engaged.
  • Re-align the mounting plate.
  • Ensure the unit is fully seated and the locking mechanism clicks into place.

6. Specifications

AttributeDetail
BrandGentex
Model NumberGEC3-24WW
ColorOff-White Faceplate
Input Voltage24VDC
Noise Level24 dB
Item Dimensions (L x W x H)3 x 5 x 3 inches
Item Weight1.05 pounds
Wire Gauge Compatibility12 to 18 AWG
Flash RateMinimum 1Hz
Horn TonesContinuous, Temporal 3, Chime, Whoop
Frequency Range1500-3000Hz (selectable)
MountingSurface Mount (with GSB)
UPC700217023969, 756655074841

7. Warranty Information

According to the manufacturer's specifications, this product comes with No Warranty.

8. Support and Contact

For technical assistance, installation queries, or further information regarding your Gentex GEC3-24WW Evacuation Horn & Strobe, please refer to the official Gentex website or contact their customer support directly.

Always ensure that installation and maintenance are performed by qualified professionals in accordance with all applicable local and national codes and standards.

© 2024 Gentex Corporation. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.