Introduction
This manual provides detailed instructions for assembling and caring for your CubicFun Azul Stadium Mexico City 3D Puzzle. This challenging and engaging 3D puzzle allows you to construct a detailed replica of the iconic Azul Stadium. The puzzle consists of 92 pieces and has a difficulty level of 3 stars, with an estimated construction time of 100 to 120 minutes.
Upon completion, the model will measure approximately 34 cm in length, making it an attractive display piece for your home or office.
Assembly Instructions
Follow these steps carefully to ensure a successful and enjoyable assembly experience:
- Unpack Components: Carefully remove all puzzle sheets and the instruction booklet from the packaging. Verify that all 92 pieces are present.
- Review Instructions: Read the included instruction booklet thoroughly before beginning assembly. It provides a visual guide and specific steps for connecting the pieces.
- Identify Pieces: Each puzzle piece is typically numbered or coded. Locate the starting pieces as indicated in the manual.
- Connect Pieces: Gently push the corresponding tabs into the slots. Ensure a snug fit without forcing the pieces, which could cause damage.
- Follow Numerical Order: Assemble the puzzle by following the numerical sequence provided in the instruction booklet. This ensures the correct structural integrity and appearance of the model.
- Ensure Correct Orientation: Pay close attention to the orientation of each piece as shown in the diagrams to achieve the intended design.
Image: The CubicFun Azul Stadium 3D Puzzle packaging and the assembled model, illustrating the product's appearance and key dimensions.
Usage Guidelines
The primary use of this product is for assembly and display. During the assembly process, handle all pieces with care to prevent bending or tearing. The puzzle is designed to enhance problem-solving skills, motor skills, hand-eye coordination, and social interaction if assembled with others.
Once assembled, the model is intended for static display. Avoid excessive handling to maintain its structural integrity.
Care and Maintenance
To ensure the longevity and appearance of your assembled 3D puzzle, follow these care guidelines:
- Dusting: Regularly dust the model with a soft, dry cloth or a soft brush to prevent dust accumulation.
- Avoid Moisture: Keep the puzzle away from water and high humidity environments, as moisture can damage the EPS foam board material.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause colors to fade and the material to degrade. Display the model in a shaded area.
- Gentle Handling: When moving the assembled model, handle it gently and support its base to prevent pieces from detaching or the structure from bending.
Troubleshooting
If you encounter any issues during assembly or with the product, consider the following:
- Pieces Not Fitting: Double-check the piece numbers and the corresponding slots in the instruction booklet. Ensure the pieces are oriented correctly. Do not force pieces together.
- Missing Pieces: If you believe a piece is missing, carefully re-examine the packaging and the area where you are assembling the puzzle. If a piece is genuinely missing, refer to the customer support section for assistance.
- Damaged Pieces: Handle pieces with care. If a piece is slightly bent, you may be able to gently straighten it. For significantly damaged pieces, contact customer support.
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | C059H |
| Number of Pieces | 92 |
| Assembled Dimensions (L x W x H) | 34 cm x 27.5 cm x 5.5 cm (approx.) |
| Material Type | EPS Foam Board |
| Recommended Age | 3 years and up |
| Educational Objectives | Problem-solving ability, Social skills, Motor skills, Hand-eye coordination |
| Assembly Required | Yes |
Image: The fully assembled CubicFun Azul Stadium 3D Puzzle, showing its final dimensions.
Warranty Information
Specific warranty information for the CubicFun Azul Stadium Mexico City 3D Puzzle (Model C059H) is not provided in the product data. Please refer to the manufacturer's official website or contact their customer service for details regarding product warranty.
Customer Support
For further assistance, inquiries about missing parts, or any other support needs, please visit the official CubicFun website or contact their customer service department. Contact details are typically available on the product packaging or the manufacturer's website.
