HJC 0942-9207-00

Download PDF
Contents

HJC SY-MAX II Helmet Shield Instruction Manual

Model: 0942-9207-00

1. Introduction

This manual provides essential information for the proper installation, usage, and maintenance of your HJC SY-MAX II Helmet Shield, model 0942-9207-00. This shield is specifically designed for HJC SY-MAX II helmets and features an RST Silver coating for enhanced eye protection and a distinctive appearance.

The RST Silver coating is applied using metallic compounds in a high vacuum chamber, resulting in a unique rainbow effect and improved eye protection through a high degree of surface reflection. This product is intended for legal on-road motorcycle use in the United States, meeting DOT approval and FMVSS 218 certification standards.

HJC SY-MAX II Helmet Shield with RST Silver coating

Image 1.1: The HJC SY-MAX II Helmet Shield, featuring an RST Silver coating. The shield is curved, designed to fit compatible HJC SY-MAX II helmets, and appears to have attachment points on both sides for secure mounting.

2. Setup and Installation

The HJC SY-MAX II Helmet Shield is designed for straightforward installation on compatible HJC SY-MAX II helmets. Ensure your helmet is clean and free of debris before beginning the installation process.

  1. Preparation: Carefully remove your existing helmet shield, if applicable. Consult your helmet's specific manual for instructions on shield removal, as mechanisms may vary.
  2. Alignment: Align the attachment points on the new SY-MAX II RST Silver shield with the corresponding mounting mechanisms on your helmet.
  3. Secure Attachment: Gently press the shield into place until it clicks securely into the helmet's shield base plates. Ensure both sides are firmly attached. Do not force the shield, as this may damage the shield or the helmet's mechanism.
  4. Functionality Check: Once installed, slowly raise and lower the shield several times to confirm it operates smoothly and locks securely in both the open and closed positions. Verify there are no gaps or loose connections.

If you encounter any difficulty during installation, refer to your HJC SY-MAX II helmet's original instruction manual or contact HJC customer support for assistance.

3. Operating and Usage

The HJC SY-MAX II Helmet Shield provides clear vision and protection during motorcycle operation. Its RST Silver coating enhances visual comfort by reducing glare and improving eye protection through surface reflection.

  • Raising and Lowering: Use the designated tab or edge on the shield to smoothly raise or lower it. The shield is designed to securely hold various open positions.
  • Visibility: Always ensure the shield is clean and free from obstructions to maintain optimal visibility.
  • Protection: The shield is scratch-resistant and provides a barrier against wind, dust, insects, and other road debris.
  • Legal Compliance: This shield, when used with a DOT approved and FMVSS 218 certified helmet, contributes to legal on-road motorcycle use in the United States.

Avoid operating your motorcycle with a damaged or excessively scratched shield, as this can impair vision and compromise safety.

4. Maintenance

Proper care and maintenance will extend the life and clarity of your HJC SY-MAX II Helmet Shield.

  • Cleaning: Clean the shield regularly with a soft, lint-free cloth and lukewarm water. A mild, non-abrasive soap can be used for stubborn dirt. Rinse thoroughly with clean water.
  • Drying: Air dry the shield or gently blot it with a clean, soft microfiber cloth. Avoid rubbing vigorously, especially on the coated surface.
  • Avoid Harsh Chemicals: Do not use ammonia-based cleaners, window cleaners, gasoline, or abrasive compounds, as these can damage the RST Silver coating and the shield material (Polyvinyl Chloride).
  • Storage: When not in use, store the helmet and shield in a protective helmet bag or a clean, dry environment away from direct sunlight and extreme temperatures. Avoid placing the shield face down on rough surfaces.
  • Inspection: Periodically inspect the shield for scratches, cracks, or other damage. Replace the shield if its integrity or clarity is compromised.

5. Troubleshooting

Below are common issues and potential solutions for your helmet shield.

  • Difficulty Installing: Ensure the shield is correctly aligned with the helmet's mounting points. Verify that you have the correct shield model for your HJC SY-MAX II helmet. Do not force the shield; if it does not click into place easily, re-check alignment.
  • Scratches or Coating Damage: The shield is scratch-resistant, but not scratch-proof. Minor scratches can occur from improper cleaning or contact with abrasive materials. Unfortunately, coating damage or deep scratches are generally not repairable and require shield replacement.
  • Fogging: While this shield does not explicitly state anti-fog properties, fogging can occur in certain conditions. Ensure proper helmet ventilation. If persistent, consider anti-fog inserts or sprays designed for helmet visors.
  • Loose Fit or Excessive Wind Noise: Re-check that the shield is fully seated and locked into its mechanism on both sides. Ensure the helmet's shield base plates are not damaged.

For issues not covered here, please contact HJC customer support.

6. Specifications

FeatureDetail
BrandHJC
Model NameHJ-S2 RST Color Mirror Coated Shield - S
Item Model Number0942-9207-00
Outer MaterialPolyvinyl Chloride (PVC)
Special FeatureScratch Resistant
Item Weight7.04 ounces
Product Dimensions (L x W x H)10.5 x 5.2 x 5.5 inches
Recommended UsesMotorcycling
Safety RatingDOT Approved, FMVSS 218 Certified

7. Warranty and Support

For information regarding the warranty of your HJC SY-MAX II Helmet Shield, please refer to the warranty documentation provided with your original helmet purchase or visit the official HJC Helmets website. Warranty terms and conditions may vary.

If you require technical assistance, have questions about product compatibility, or need to report a defect, please contact HJC customer support directly through their official website or authorized dealers.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.