1. Product Overview
The NGK C6HA is a general-purpose spark plug designed for reliable ignition in various engines, including those found in agricultural, marine, and industrial equipment. This spark plug features a screw-type terminal.
Key Features:
- General-purpose spark plug for broad compatibility.
- Suitable for agricultural, marine, and industrial applications.
- Screw-type terminal design (terminal nut not included).

Figure 1: NGK C6HA Spark Plug. This image displays the full view of the spark plug, highlighting its ceramic insulator, metal shell, and electrode tip.
2. Setup and Installation
Proper installation is crucial for optimal performance and engine longevity. Always refer to your vehicle or equipment manufacturer's service manual for specific instructions and torque specifications.
- Compatibility Check: Before installation, verify that the NGK C6HA spark plug is the correct part number and type for your engine. Consult your engine's manufacturer specifications or the NGK compatibility chart. Incorrect spark plugs can lead to engine damage.
- Engine Preparation: Ensure the engine is cool before attempting to remove or install spark plugs. Disconnect the spark plug wire from the old plug.
- Remove Old Spark Plug: Use a spark plug socket to carefully remove the old spark plug. Inspect the old plug for signs of wear or fouling, which can indicate engine issues.
- Inspect New Spark Plug: Visually inspect the new NGK C6HA spark plug for any damage to the insulator or electrodes.
- Gap Adjustment (if necessary): While NGK spark plugs are typically pre-gapped, it is recommended to verify the gap setting against your engine's specifications using a spark plug gapping tool. Adjust if needed, being careful not to damage the electrode.
- Installation: Thread the new spark plug into the cylinder head by hand to prevent cross-threading. Once finger-tight, use a torque wrench with a spark plug socket to tighten the plug to the manufacturer's specified torque. Overtightening or undertightening can cause damage.
- Reconnect: Reconnect the spark plug wire firmly to the new spark plug.
Important Note: The images provided are samples. Always confirm the correct part number and quantity required for your specific vehicle or equipment using the manufacturer's official resources.
3. Operating Principles
The NGK C6HA spark plug functions as a critical component in the internal combustion engine's ignition system. It generates an electrical spark that ignites the air-fuel mixture within the engine's combustion chamber, initiating the power stroke.
Once installed, the spark plug operates continuously as part of the engine's cycle. No direct user operation is required beyond ensuring proper installation and maintenance.
4. Maintenance
Regular inspection and timely replacement of spark plugs are essential for maintaining engine performance, fuel efficiency, and reducing emissions.
- Inspection: Periodically inspect spark plugs for signs of wear, such as eroded electrodes, carbon fouling, oil fouling, or overheating. The condition of the spark plug can provide valuable insights into the engine's health.
- Cleaning: While some light fouling can be carefully cleaned, heavily fouled or worn spark plugs should be replaced.
- Replacement Interval: Follow your engine manufacturer's recommended replacement schedule. Spark plug life varies depending on engine type, operating conditions, and fuel quality. Replacing spark plugs at recommended intervals helps prevent misfires and maintains optimal engine performance.
5. Troubleshooting
If your engine experiences issues such as misfires, rough idling, reduced fuel economy, or difficulty starting, the spark plugs may be a contributing factor. Here are common issues and potential solutions:
- Engine Misfires or Rough Idling: This can be caused by a worn, fouled, or incorrectly gapped spark plug. Inspect and replace as necessary.
- Reduced Fuel Economy: Inefficient combustion due to old or faulty spark plugs can lead to increased fuel consumption. Check and replace spark plugs.
- Hard Starting: Weak or inconsistent spark from worn plugs can make starting difficult. Ensure spark plugs are in good condition and properly gapped.
- Engine Knocking or Pinging: While often related to fuel or timing, incorrect spark plug heat range can contribute. Ensure the correct spark plug type is used for your engine.
For persistent issues, consult a qualified mechanic or refer to your engine's service manual for detailed diagnostic procedures.
6. Specifications
| Specification | Detail |
|---|---|
| Brand | NGK |
| Model Number | C6HA |
| Product Dimensions | 1 x 1 x 1 cm |
| Item Weight | 30 g |
| Terminal Type | Screw type |
| Thread Size | Standard |
| Compatible Vehicle Types | Tractor, Boat |
| Automotive Mounting Type | Vehicle-specific fit |
| UPC | 087295147122 |
7. Warranty and Support
For detailed information regarding the warranty for your NGK C6HA Spark Plug, please refer to the official NGK website or contact NGK customer support directly. Warranty terms and conditions may vary by region and product.
If you require technical assistance or have questions about product compatibility, please visit the official NGK website or consult with an authorized NGK dealer or service center.





