Bissell 210-0107
Contents
Bissell 210-0107 Automix Part User Manual
For ProHeat Models 1697, 1698, 1699, 7901, 7920
1. Product Overview
The Bissell 210-0107 Automix part is a genuine OEM replacement component designed for specific Bissell ProHeat carpet cleaner models. This part, which comes without a knob, is crucial for the proper mixing function within your carpet cleaner, ensuring effective cleaning performance.

Figure 1: The Bissell 210-0107 Automix part. This image displays the black plastic component, highlighting its cylindrical main body and the attached arm with connection points. It is a key internal part for fluid management in compatible Bissell ProHeat machines.
This part is manufactured in China and is an essential component for maintaining the functionality of your Bissell ProHeat machine.
2. Compatibility
The Bissell 210-0107 Automix part is specifically designed to fit the following Bissell ProHeat models:
- Bissell ProHeat Model 1697
- Bissell ProHeat Model 1698
- Bissell ProHeat Model 1699
- Bissell ProHeat Model 7901
- Bissell ProHeat Model 7920
Ensure your model number matches one of those listed above before attempting installation.
3. Installation Guide
Replacing the Automix part requires careful handling and may involve disassembling parts of your Bissell ProHeat machine. It is recommended to consult your specific carpet cleaner's service manual or a qualified technician if you are unsure about any steps.
Safety Precautions:
- Always unplug the carpet cleaner from the power outlet before beginning any repair or maintenance.
- Ensure the machine is empty of water and cleaning solution.
- Wear appropriate personal protective equipment, such as gloves, if necessary.
General Installation Steps:
- Access the Automix Assembly: Depending on your specific ProHeat model, you may need to remove the dirty water tank, clean water tank, and potentially the outer casing or other components to gain access to the existing automix assembly. Refer to your machine's original user manual for disassembly instructions.
- Disconnect Old Part: Carefully disconnect any hoses or electrical connections attached to the old automix part. Note their positions for reassembly.
- Remove Old Part: Unfasten any screws or clips securing the old automix part in place and remove it.
- Install New Part: Position the new Bissell 210-0107 Automix part in the correct orientation. Secure it with the screws or clips previously removed.
- Reconnect Connections: Reconnect all hoses and electrical connections to the new part, ensuring they are securely fastened and properly seated.
- Reassemble Machine: Reassemble the carpet cleaner by reversing the disassembly steps. Ensure all components are correctly aligned and secured.
- Test Functionality: After reassembly, fill the clean water tank and perform a test run to ensure the automix function is working correctly and there are no leaks.
Note: This is a general guide. Specific steps may vary by model. Always prioritize safety and refer to your appliance's detailed service instructions.
4. Functionality and Usage
The Automix part is responsible for accurately blending the cleaning solution with water before it is dispensed onto the carpet. Once installed, its function is integrated into the overall operation of your Bissell ProHeat carpet cleaner. There are no user-adjustable settings on this specific part itself, as it operates automatically within the machine's design.
Proper installation ensures that your carpet cleaner will continue to dispense the correct mixture of water and cleaning formula, which is essential for effective stain removal and deep cleaning.
5. Maintenance
As an internal component, the Bissell 210-0107 Automix part generally requires minimal direct maintenance. However, to ensure its longevity and the continued efficient operation of your carpet cleaner, consider the following:
- Regular Cleaning of Machine: Follow the cleaning instructions for your overall Bissell ProHeat machine, especially regarding flushing the system with clean water after each use. This helps prevent residue buildup in internal components, including the automix part.
- Use Recommended Solutions: Only use Bissell-approved cleaning solutions with your machine. Non-approved solutions may contain chemicals that can degrade internal plastic or rubber components over time.
- Storage: Store your carpet cleaner in a clean, dry place to prevent dust and debris from entering the system, which could potentially affect internal parts.
If you notice any blockages or reduced performance related to solution dispensing, it may indicate a need for further inspection or cleaning of the automix assembly or associated hoses.
6. Troubleshooting
If you experience issues after replacing the Automix part, consider the following common troubleshooting steps:
- No Solution Dispensing:
- Check that the clean water tank is properly seated and filled.
- Ensure the cleaning solution tank is filled and correctly inserted.
- Verify all hoses connected to the automix part are securely attached and not kinked or blocked.
- Inspect the automix part for any visible blockages or damage that might have occurred during installation.
- Leaking:
- Ensure all connections (hoses, seals) to the new automix part are tight and properly sealed.
- Check for any cracks or damage on the new part itself that might have occurred during shipping or handling.
- Incorrect Solution Mixture:
- Confirm that the correct cleaning solution is being used.
- If the issue persists, the automix part may be faulty or incorrectly installed, requiring re-inspection or replacement.
For persistent issues, refer to your specific Bissell ProHeat model's comprehensive troubleshooting guide or contact Bissell customer support.
7. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 210-0107 |
| Brand | Bissell |
| Color | Black |
| Material | Aluminum, Steel, Zinc |
| Product Dimensions (L x W x H) | 3.5 x 2 x 3 inches |
| Item Weight | 0.81 ounces |
| UPC | 633556771270 |
| Country of Origin | China |
8. Warranty and Support
Specific warranty information for replacement parts like the Bissell 210-0107 Automix part may vary. It is advisable to retain your purchase receipt and check the warranty policy provided by the retailer or Bissell directly at the time of purchase.
For technical support, installation assistance, or to inquire about warranty coverage, please contact Bissell Customer Service. You can typically find their contact information on the official Bissell website or within the original user manual of your Bissell ProHeat carpet cleaner.
Bissell Official Website: www.bissell.com
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.