M-Wave Lock 'N' Roll D 24.9 Combination Lock User Manual

Introduction

The M-Wave Lock 'N' Roll D 24.9 Combination Lock is a lightweight and versatile security device designed for cyclists, skiers, and snowboarders. This resettable 4-digit combination lock provides a convenient and portable solution for securing your equipment against opportunistic theft. Its compact design allows for easy storage in a pocket or bag, making it an ideal companion for various outdoor activities.

Figure 1: Front view of the M-Wave Lock 'N' Roll D 24.9 Combination Lock, showing the combination dials and retractable cable.

Key Features

• 4-Digit Resettable Combination: Allows you to set your own personalized code for keyless convenience.
• Compact Cable Length: Features a 2.4 mm diameter cable extending approximately 3 feet (91 cm), suitable for securing bikes, skis, or snowboards.
• Protective Housing: Designed with a dark transparent housing to help prevent scratches on your valuable equipment.
• Versatile Application: Ideal for securing bicycles, skis, and snowboards in various settings.
• Lightweight Design: Weighs approximately 100 grams, making it easy to carry.

Setup: Setting Your Personal Combination

Your M-Wave Lock 'N' Roll D 24.9 Combination Lock comes preset to a factory default combination, typically 0-0-0-0. Follow these steps to set your own unique 4-digit combination:

1. Open the Lock: Ensure the lock is currently set to the correct combination (factory default 0-0-0-0 or your previously set code) and the cable is retracted.
2. Locate the Reset Button: On the side or bottom of the lock body, you will find a small reset button or lever. This may require a pen tip or small pointed object to press.
3. Enter Reset Mode: Press and hold the reset button/lever. While holding it, rotate the combination dials to your desired new 4-digit code. Choose a memorable number.
4. Confirm New Combination: Release the reset button/lever. Your new combination is now set.
5. Test the New Combination: Scramble the dials away from your new code. Then, enter your new code to ensure the lock opens correctly. If it does not open, repeat the steps carefully.

Figure 2: Detail view of the combination dials and the typical location of the reset button (often a small recessed pin or lever).

Important: Make sure to remember your new combination. There is no master key or override if you forget your code. Write it down and store it in a secure, private location if necessary.

Operating the Lock

Using your M-Wave Lock 'N' Roll D 24.9 Combination Lock is straightforward:

1. To Unlock: Rotate the combination dials to your personal 4-digit code. The cable mechanism will release, allowing you to pull out the cable.
2. To Lock: Extend the cable around the item(s) you wish to secure (e.g., bike frame and a fixed object, skis together). Insert the end of the cable into the locking port on the main body of the lock until it clicks securely into place.
3. To Secure: Once the cable is locked, scramble the combination dials to a random set of numbers. This prevents unauthorized access.
4. To Retract Cable: After unlocking and removing the cable from the locking port, press the cable retraction button (usually a small button on the side of the lock body) to automatically retract the cable back into the housing.

Figure 3: The lock with its cable fully extended, ready for use.

Maintenance and Care

To ensure the longevity and smooth operation of your M-Wave Lock 'N' Roll D 24.9 Combination Lock, follow these simple maintenance guidelines:

• Keep Clean: Periodically wipe the lock body and cable with a soft, damp cloth to remove dirt and grime. Avoid abrasive cleaners.
• Lubrication: If the combination dials or cable retraction mechanism become stiff, apply a small amount of silicone-based lubricant to the moving parts. Do not use oil-based lubricants as they can attract dirt.
• Avoid Extreme Conditions: While designed for outdoor use, prolonged exposure to extreme temperatures or harsh weather conditions (e.g., heavy rain, freezing temperatures) may affect performance. Store in a dry place when not in use.
• Inspect for Damage: Regularly check the cable for fraying or cuts, and the lock body for cracks or damage. Discontinue use if significant damage is observed.

Troubleshooting

If you encounter issues with your M-Wave Lock 'N' Roll D 24.9 Combination Lock, consider the following:

• Lock Will Not Open:
  • Ensure the dials are precisely aligned with your combination. Even a slight misalignment can prevent opening.
  • Verify you are using the correct combination. If you recently changed it, try both the old and new codes.
  • Check for debris or dirt in the dial mechanism. Clean if necessary.
• Cable Will Not Retract:
  • Ensure the cable is fully disengaged from the locking port.
  • Press the retraction button firmly.
  • Check for any obstructions or kinks in the cable.
  • Apply a small amount of silicone lubricant to the cable entry point if it feels stiff.
• Difficulty Setting Combination:
  • Ensure the lock is open and the cable is retracted before attempting to reset the code.
  • Make sure the reset button/lever is fully pressed and held while setting the new code.
  • Release the reset button/lever only after the new combination is set.

If problems persist, please contact customer support.

Product Specifications

Warranty Information

M-Wave products are manufactured to high standards. For specific warranty details regarding your Lock 'N' Roll D 24.9 Combination Lock, please refer to the warranty policy provided at the time of purchase or visit the official M-Wave website. Typically, warranties cover manufacturing defects under normal use conditions.

Customer Support

Should you have any questions, require assistance, or need to report an issue with your M-Wave Lock 'N' Roll D 24.9 Combination Lock, please contact the manufacturer or retailer from whom you purchased the product.

You can also visit the official M-Wave store for more information and support resources:

Visit M-Wave Store