Palmer PAN04

Download PDF
Contents

Palmer PAN04 2-Channel Passive DI Box User Manual

Model: PAN04 | Brand: Palmer

Introduction

Welcome to the user manual for your Palmer PAN04 2-Channel Passive DI Box. This manual provides essential information for the safe and effective operation, setup, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and longevity of your equipment.

Product Overview

The Palmer PAN04 is a robust, dual-channel passive DI box designed for converting unbalanced, high-impedance signals into balanced, low-impedance signals suitable for mixing consoles or recording interfaces. Its passive design means it does not require external power, making it reliable and easy to integrate into any audio setup. It is ideally suited for instruments with multiple outputs, such as keyboards, or for stereo applications.

Key Features

  • 2 Channel Passive DI Box
  • Jack input with parallel THRU output
  • Can handle both line level and speaker level signals
  • Transformer balanced XLR output
  • Attenuable input sensitivity (-30dB pad)
  • Ground lift switch to eliminate hum

Product Views

Palmer PAN04 front view with input and output labels

Figure 1: Front view of the Palmer PAN04, showing the input and link output jacks on the left, and balanced XLR outputs with pad and ground lift switches on the right.

Palmer PAN04 angled front view showing XLR outputs

Figure 2: Angled view highlighting the balanced XLR outputs and their corresponding pad and ground lift switches.

Palmer PAN04 angled side view showing input jacks

Figure 3: Angled view showcasing the 1/4" TS/TRS input and link output jacks for connecting instruments and local amplifiers.

Palmer PAN04 back view with XLR outputs and switches

Figure 4: Rear view of the PAN04, providing a clear look at the XLR output connectors and the pad/ground lift controls for each channel.

Palmer PAN04 top angled view showing both input and output sides

Figure 5: Top-down angled view, illustrating the compact and robust design of the PAN04, with both input and output sections visible.

Safety Information

  • Do not open the casing; there are no user-serviceable parts inside. Opening the unit will void the warranty.
  • Keep the device away from moisture, liquids, and extreme temperatures. Operate only in dry environments.
  • Use only with compatible audio equipment and cables. Ensure all connections are secure before operation.
  • Ensure proper grounding of all connected audio equipment to avoid electrical hazards and minimize hum or noise.
  • This is a passive device and does not require external power. Do not attempt to power it externally.
  • Avoid dropping or subjecting the unit to severe impacts, as this may damage internal components.

Package Contents

Please check that your package contains the following items:

  • 1 x Palmer PAN04 2-Channel Passive DI Box
  • 1 x This User Manual

If any items are missing or damaged, please contact your retailer immediately.

Setup

The Palmer PAN04 is designed for straightforward integration into your audio setup. Follow these steps for proper connection:

Connecting Instruments/Sources

Connect your instrument (e.g., keyboard, guitar, bass) or any audio source with a 1/4" output to the INPUT jack(s) on the PAN04 using a standard 1/4" TS or TRS cable. The PAN04 features two independent channels for stereo or dual-mono applications.

The LINK OUTPUT jack provides a parallel, unbalanced output of the input signal. This is useful for sending the signal to a local amplifier (e.g., a guitar amp, keyboard monitor) while simultaneously sending the DI signal to a mixing console or recording interface. Connect your amplifier to this jack using a 1/4" TS cable.

Balanced Output (XLR)

Connect the BALANCED OUTPUT XLR connector(s) to the microphone input of your mixing console, audio interface, or PA system using a standard XLR cable. This output provides a balanced, low-impedance signal, which is ideal for long cable runs and offers superior noise rejection compared to unbalanced signals.

Pad Switch (-30dB)

If your input source has a very high output level (e.g., a speaker-level signal from an amplifier's speaker output, or a hot line-level signal from certain synthesizers), engage the -30dB pad switch. This attenuates the input signal by 30dB to prevent overloading the DI box's transformer or the connected mixer input, ensuring a clean signal.

Ground Lift Switch (LIFT/GND)

The LIFT/GND switch disconnects the ground connection between the input and output. If you experience hum or buzz in your audio signal (often caused by ground loops between different pieces of equipment), try engaging this switch to the LIFT position. In most cases, the switch should be in the GND (grounded) position for optimal performance unless hum is present.

Connection Diagram

Connection diagram for Palmer PAN04 showing guitar connected to DI box, then to amp and mixer

Figure 6: Example connection diagram illustrating how to connect an instrument (guitar) to the PAN04, with the signal split to a local amplifier and a mixing console.

Operating Instructions

Once connected, the PAN04 operates passively, requiring no external power. Its function is to convert and balance your audio signal.

Signal Flow

The audio signal enters via the 1/4" INPUT jack. It then passes through a high-quality transformer, which performs the impedance matching and signal balancing. The balanced, low-impedance signal exits via the BALANCED OUTPUT XLR. A direct, unbuffered copy of the input signal is simultaneously available at the LINK OUTPUT for local monitoring or additional signal routing.

Stereo Operation

The PAN04 features two independent channels, making it ideal for stereo instruments like keyboards, synthesizers, or stereo effects units. Connect the left channel output of your instrument to the top set of INPUT/LINK OUTPUT/BALANCED OUTPUT, and the right channel output to the bottom set. This allows you to send a full stereo signal to your mixing console or recording setup.

Maintenance

The Palmer PAN04 is built for durability and requires minimal maintenance. Following these guidelines will help ensure its long-term performance:

  • Cleaning: Clean the exterior of the unit with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the finish or internal components.
  • Storage: Store the DI box in a dry environment, away from dust, direct sunlight, and extreme temperatures. When not in use, consider storing it in a protective case.
  • Connections: Regularly check all audio cables for signs of wear or damage. Ensure that all connections to the DI box are secure and free of debris.
  • Internal Components: The unit contains no user-serviceable parts. Do not attempt to open or repair the device yourself. Refer to qualified service personnel if repair is needed.

Troubleshooting

If you encounter issues with your Palmer PAN04, refer to the table below for common problems and their solutions:

Problem Possible Cause Solution
No Sound Output Incorrect cable connections; Faulty cables; Pad switch engaged unnecessarily for low-level signals; Mixer input not selected or muted. Verify all cable connections are correct and secure. Test cables for continuity. Ensure the pad switch is disengaged if your input signal is not excessively hot. Check mixer input settings.
Hum or Buzz in Audio Ground loop; Faulty cable; External electrical interference. Engage the LIFT switch on the PAN04. Try different cables. Ensure all audio equipment is connected to the same power circuit or properly grounded. Move away from sources of electrical interference.
Distorted or Clipped Sound Input signal is too hot (too high level). Engage the -30dB pad switch on the PAN04. Reduce the output level of the source device (instrument, amplifier).
Weak or Low Output Signal Pad switch engaged when not needed; Low input signal level. Ensure the -30dB pad switch is disengaged. Increase the output level of your source device if possible.

Specifications

Detailed technical specifications for the Palmer PAN04 2-Channel Passive DI Box:

Feature Detail
Product Type 2-Channel Passive DI Box
Model Number PAN04
Input Connectors 2 x 1/4" TS/TRS Jack (unbalanced)
Link Output Connectors 2 x 1/4" TS/TRS Jack (unbalanced, parallel to input)
Balanced Output Connectors 2 x XLR (balanced)
Attenuation Pad -30 dB (switchable)
Ground Lift Switchable (LIFT/GND)
Frequency Response 20 Hz - 20 kHz (typical)
Item Weight 1.01 pounds (0.46 Kilograms)
Product Dimensions (L x W x H) 4.33 x 1.77 x 4.33 inches (110 x 45 x 110 mm)
Housing Material Steel
First Available Date August 8, 2012

Warranty and Support

Palmer products are manufactured to high quality standards. For specific warranty information, terms, and conditions, please refer to the official Palmer website or contact your local distributor. Keep your proof of purchase for any warranty claims.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please visit the official Palmer website or contact their customer support. You may also find additional resources and FAQs on the Palmer Store on Amazon.

Protection plans may be available for this product through your retailer or third-party providers. Please consult your purchase platform for details on extended coverage options.

© 2025 Palmer. All rights reserved. Information in this manual is subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.