Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Kingston Brass KB1751PXBS Heritage 8-Inch Centerset Kitchen Faucet. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your product.
The Kingston Brass Heritage faucet combines traditional design with modern functionality, featuring durable solid brass construction and a polished chrome finish designed to resist tarnishing and corrosion. This faucet is designed for a 4-hole installation and includes a matching brass side sprayer.
Key Features:
- Solid Brass Construction for durability.
- Polished Chrome Finish resists tarnishing and corrosion.
- Two-Handle Deck Mount Design for precise water control.
- 360-Degree Swivel Spout for enhanced flexibility.
- Integrated Removable Aerator.
- Duraseal Washerless Valve for drip-free performance.
- Max 1.8 GPM/6.8 LPM Water Flow Rate at 60 PSI (ASME standard).
- Compliant with California Energy Commission Title 20.
- Includes Brass Side Sprayer.
Setup and Installation
Before installation, ensure all necessary parts are present and that you have the appropriate tools. Professional installation is recommended.
Tools and Materials Required:
- Adjustable Wrench
- Phillips Head Screwdriver
- Plumber's Putty or Silicone Sealant
- Thread Seal Tape
- Safety Glasses
- Flashlight
Installation Steps:
- Prepare the Sink Area: Turn off the main water supply. Clear the area under the sink. If replacing an old faucet, remove it and clean the sink surface thoroughly.
- Install the Faucet Body: Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet body. Insert the faucet body into the center hole of your 4-hole sink. From underneath the sink, secure it with the provided washer and mounting nut. Tighten firmly but do not overtighten.
- Install Handles: Place the hot and cold handles into their respective outer holes. Secure them from underneath with washers and mounting nuts. Ensure handles are aligned correctly.
- Install Side Sprayer: Insert the side sprayer base into the remaining hole. Secure it from underneath with the provided washer and mounting nut. Connect the sprayer hose to the designated port on the faucet body.
- Connect Water Supply Lines: Attach the hot and cold water supply lines to the corresponding inlets on the faucet body. Use thread seal tape on the threads and tighten with an adjustable wrench. Connect the other ends of the supply lines to your hot and cold water shut-off valves.
- Test for Leaks: Slowly turn on the main water supply. Check all connections for leaks. Operate the faucet handles and sprayer to ensure proper water flow and temperature control.
Figure 1: Technical drawing showing dimensions and installation details of the faucet.
Figure 2: Diagram highlighting features such as solid brass construction, 1.8 GPM flow rate, 4-hole installation, side sprayer, and rotating swivel spout.
Operating Instructions
Your Kingston Brass KB1751PXBS faucet is designed for ease of use and reliable performance.
Faucet Operation:
- Water Flow: Turn the hot or cold handle counter-clockwise to open the water flow. Turn clockwise to close.
- Temperature Control: Adjust the hot and cold handles to achieve your desired water temperature.
- Swivel Spout: The faucet spout can rotate 360 degrees, allowing for flexible use across your sink area.
- Side Sprayer: To use the side sprayer, ensure the main faucet handles are open. Squeeze the handle on the sprayer to activate water flow through the sprayer. Release the handle to stop.
Figure 3: The Kingston Brass KB1751PXBS faucet with its two handles and side sprayer.
Figure 4: The faucet in a typical kitchen environment, showcasing its design and functionality.
Figure 5: A detailed view of the included brass side sprayer, highlighting its design.
Maintenance and Care
Proper care and maintenance will ensure the lasting beauty and performance of your Kingston Brass faucet.
- Cleaning: Clean the faucet regularly with a soft cloth and warm, soapy water. Rinse thoroughly and dry immediately to prevent water spots.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, harsh chemicals, ammonia-based products, or polishes containing alcohol. These can damage the polished chrome finish and void your warranty.
- Aerator Maintenance: If water flow decreases, the aerator may be clogged. Unscrew the aerator from the tip of the spout, clean any debris, and rinse thoroughly before reattaching.
- Washerless Valve: The Duraseal washerless valve is designed for long-term, drip-free performance. If a leak occurs from the handles, the cartridge may need replacement.
Troubleshooting
Refer to the following common issues and solutions before contacting customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed shut-off valve; low water pressure in home. | Clean or replace aerator. Ensure shut-off valves are fully open. Consult a plumber if home water pressure is consistently low. |
| Faucet Leaks from Spout | Worn or damaged cartridge. | Replace the Duraseal washerless cartridge. |
| Leaks from Handle Base | Loose packing nut; worn O-rings or cartridge. | Tighten the packing nut. Replace O-rings or cartridge if necessary. |
| Side Sprayer Malfunction | Clogged sprayer head; kinked hose; diverter issue. | Clean sprayer head. Check hose for kinks. If issue persists, the diverter or sprayer may need replacement. |
Specifications
Detailed specifications for the Kingston Brass KB1751PXBS Heritage 8-Inch Centerset Kitchen Faucet:
- Brand: Kingston Brass
- Model Name: Kingston Brass Heritage
- Model Number: KB1751PXBS
- Mounting Type: Deck Mount
- Finish Type: Polished Chrome
- Material: Brass
- Number of Handles: 2
- Included Components: Faucet; Mounting Hardware; Side Sprayer
- Hole Count: 4
- Special Feature: Corrosion Resistant
- Style: Traditional
- Installation Type: Centerset
- Maximum Flow Rate: 1.8 Gallons Per Minute (6.8 Liters Per Minute)
- Handle Material: Porcelain
- Spout Height: 10.38 Inches
- Spout Reach: 8.63 Inches
- Product Dimensions: 10 x 8.63 x 10.38 inches
- Item Weight: 0.16 ounces (Note: This weight seems unusually low and may refer to a component rather than the full faucet. Please refer to packaging for accurate shipping weight.)
- UPC: 663370013799
- Date First Available: January 15, 2009
Warranty and Support
Kingston Brass products are manufactured under the highest standards of quality and workmanship. This product is backed by a manufacturer's warranty against defects in materials and manufacturing. For specific warranty details, claims, or technical support, please contact Kingston Brass directly.
Contact Information:
- Website: www.kingstonbrass.com
- Customer Service: Refer to the manufacturer's website for the most current contact information, including phone numbers and email support.
