PROFORM 67650 Vehicle Scale System Kit Instruction Manual

Product Overview

The PROFORM 67650 Vehicle Scale System Kit is engineered for accurate weight measurement of vehicles. This system comprises four individual scale pads and a central display unit, designed for ease of use and precise readings. Each scale pad has a capacity of 1,250 lbs.

Figure 1: The PROFORM 67650 Vehicle Scale System Kit includes four individual scale pads and a central display unit, all connected by cables. This comprehensive kit is designed for precise vehicle weight measurement.

Setup Instructions

1. Unpack Components: Carefully remove all components from the packaging, including the main display unit, four scale pads, and connecting cables.
2. Install Batteries: Locate the battery compartment on the back of the main display unit. Insert the required batteries. Ensure correct polarity.
3. Connect Scale Pads: Connect each of the four scale pads to the main display unit using the provided cables. Ensure all connections are secure.
4. Placement: Place the four scale pads on a flat, level surface where the vehicle will be weighed. Ensure sufficient space around each pad for vehicle tires.
5. Initial Power On: Press the power button on the main display unit to turn on the system. The display should illuminate and show initial readings.

Operating Instructions

This section details the basic operation of your PROFORM 67650 Vehicle Scale System.

• Power On/Off: Press the Power button (symbol: circle with vertical line) to turn the unit on. Press and hold the same button to turn the unit off.
• Backlight Function: Press the Backlight button (symbol: sun icon) to activate or deactivate the display backlight for improved visibility in various lighting conditions.
• Unit Conversion: Use the Function (Fn) button to cycle between measurement units, typically pounds (lb) and kilograms (kg).
• Tare Function: The Tare button (symbol: circle with diagonal line) allows you to zero out the current weight, useful for subtracting the weight of a container or fixture.
• Weighing a Vehicle:
  1. Ensure all scale pads are properly connected and the unit is powered on.
  2. Carefully drive or push the vehicle onto the scale pads, ensuring each tire rests fully on a pad.
  3. Allow the readings to stabilize on the main display unit. The display will show individual wheel weights and total vehicle weight.

Maintenance

• Battery Replacement: When the battery indicator on the display shows low power, replace all batteries in the main display unit. Use fresh, high-quality batteries for optimal performance.
• Cleaning: To clean the scale pads and display unit, wipe them with a soft, damp cloth. Avoid using abrasive cleaners or solvents, which may damage the surfaces or electronic components.
• Storage: Store the scale system in a dry, clean environment away from extreme temperatures and direct sunlight. Disconnect all cables and, if storing for an extended period, remove the batteries from the display unit to prevent leakage.

Troubleshooting

Specifications

• Model: 67650
• Brand: ProForm
• Manufacturer: Proform
• Item Weight: 44 pounds (total system)
• Product Dimensions: 23.5 x 13.2 x 13.9 inches (overall system dimensions)
• Package Dimensions: 34.544 H x 59.69 L x 33.782 W (centimetres)
• Package Weight: 45.4 pounds
• Capacity Per Scale Pad: 1,250 lbs.
• Fit Type: Vehicle Specific
• Special Features: Backlit Display, Large Display
• Country of Origin: China

Warranty and Support

Specific warranty details for the PROFORM 67650 Vehicle Scale System Kit are not provided in this manual. For warranty information, technical support, or service inquiries, please contact the manufacturer directly or refer to the product packaging and official ProForm website.