Tower GFCI Outlet Adapter

Introduction

The Tower GFCI Outlet Adapter (Model CECOMINOD043477) is a portable safety device designed to protect against electrical shock. It detects ground faults, which are current leakages from damaged cords or water exposure, and immediately interrupts power to prevent serious injury. This adapter is suitable for use with any standard 3-wire grounded outlet.

Safety Information

• WARNING: This device is designed to protect against electrical shock. Do not bypass or tamper with its safety features.
• Always ensure the adapter is properly plugged into a standard 3-wire grounded electrical outlet.
• Do not use if the adapter or any connected appliance shows signs of damage.
• Keep the adapter dry. Do not immerse in water or expose to excessive moisture.
• This product is UL File No. E174279 / CSA file No. LR108160 certified for safety.

Product Overview

The Tower GFCI Outlet Adapter features a robust design with essential safety components:

• Reset Button: Used to restore power after a trip or initial plug-in.
• Test Button: Used to verify the GFCI's functionality.
• Red Power Indicator Light: Illuminates when power is supplied through the adapter.

Image showing the Tower GFCI Outlet Adapter. The adapter has a standard three-prong plug on one side and a single three-prong outlet on the other. Clearly visible are the 'TEST' and 'RESET' buttons, along with a small red indicator light.

Setup

1. Plug the GFCI Outlet Adapter directly into any standard 3-wire grounded electrical outlet. Ensure it is securely seated.
2. Press the RESET button. The red power indicator light should illuminate, indicating that power is now supplied to the adapter's outlet.
3. Plug your appliance or extension cord into the single outlet on the GFCI adapter.

Operating Instructions

Testing the GFCI Adapter

It is crucial to test the GFCI adapter before each use, or at least monthly, to ensure proper functionality:

1. With the adapter plugged into an outlet and the red indicator light on (after pressing RESET), press the TEST button.
2. The red indicator light should turn off, and power to the adapter's outlet should be interrupted.
3. Press the RESET button again. The red indicator light should turn on, restoring power.
4. If the adapter does not respond as described during the test, do not use it. Contact customer support for assistance.

Indicator Light

The red indicator light signifies that power is flowing through the adapter. If the light is off, it means either the adapter is not receiving power from the wall outlet, or it has tripped due to a detected ground fault.

Maintenance

• Keep the adapter clean and free from dust and debris. Use a dry cloth for cleaning.
• Periodically inspect the adapter for any signs of physical damage, such as cracks in the casing or bent/damaged prongs.
• Note: It is normal for the adapter to feel warm during extended operation. If it becomes excessively hot, unplug it and discontinue use.

Troubleshooting

• No Power / Indicator Light Off:
  • Ensure the adapter is fully plugged into a live electrical outlet.
  • Press the RESET button. If the light does not turn on, the adapter may be faulty, or the wall outlet has no power. Test the wall outlet with another device.
• Adapter Trips Frequently:
  • Frequent tripping indicates a ground fault. Disconnect the appliance plugged into the adapter and inspect it for damage. Do not use a faulty appliance.
  • If the adapter trips without an appliance connected, it may be faulty, or the electrical wiring of the outlet has an issue. Consult a qualified electrician.

Specifications