Introduction
Thank you for choosing the John Timberland Royal Lion Outdoor Fountain. This elegant 54-inch high pedestal fountain features a traditional weathered faux stone finish and four lion head water spouts, designed to enhance any outdoor living space. Crafted from lightweight resin, this fountain is both durable and easy to position. This manual provides essential information for the safe assembly, operation, and maintenance of your new fountain.
Image: Front view of the John Timberland Royal Lion Outdoor Fountain.
Safety Information
Please read and understand all instructions before assembling, installing, or operating this fountain. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect the power supply before performing any maintenance or cleaning.
- Ensure the fountain is placed on a stable, level surface to prevent tipping.
- Use only with a properly grounded GFCI (Ground Fault Circuit Interrupter) protected outlet.
- Do not operate the pump without sufficient water, as this can damage the pump.
- Keep children and pets away from the fountain during operation to prevent accidents.
- Do not allow the power cord to be pinched or walked on.
- Protect the fountain from freezing temperatures by draining and storing it indoors during winter months.
Package Contents
Verify that all components are present and undamaged before proceeding with assembly.
- Fountain Base/Pedestal
- Fountain Basin
- Top Section with Lion Heads
- Finial (top decorative element)
- Submersible Water Pump
- 8-foot Power Cord (attached to pump)
- Tubing for water circulation
Setup Instructions
Follow these steps for proper assembly and initial setup of your fountain.
- Unpack Components: Carefully remove all parts from the packaging. Inspect for any damage. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Position the Base: Place the fountain base/pedestal on a firm, level surface in your desired outdoor location. Ensure it is stable and will not tip over.
- Assemble Basin: Carefully place the fountain basin onto the base, ensuring it is seated securely.
- Connect Pump and Tubing: Attach the provided tubing to the outlet of the submersible water pump. Place the pump inside the fountain basin.
- Install Top Section: Guide the tubing and power cord through the designated opening in the top section with lion heads. Carefully place this section onto the basin, ensuring the tubing connects properly to the water distribution system within the top section.
- Attach Finial: Place the finial onto the very top of the fountain, ensuring it is stable.
- Fill with Water: Fill the fountain basin with distilled water until the pump is fully submerged and the water level is approximately 1-2 inches below the rim of the basin. Do not overfill.
- Connect Power: Plug the power cord into a GFCI-protected outdoor electrical outlet. The fountain should begin operating.
- Adjust Water Flow: Some pumps have an adjustable flow rate. If applicable, adjust the flow to achieve your desired water effect and minimize splashing.
Image: Fountain with key features highlighted, including lion head spouts and water capacity.
Operating Instructions
To ensure continuous and optimal performance of your fountain:
- Maintain Water Level: Check the water level daily, especially during warm weather, as water will evaporate. Refill as needed to keep the pump fully submerged. Operating the pump dry will cause damage and void the warranty.
- Electrical Connection: Always ensure the power cord is securely plugged into a GFCI-protected outlet.
- Environmental Factors: Strong winds can cause increased water evaporation and splashing. Consider fountain placement to minimize these effects.
Maintenance
Regular maintenance will prolong the life and appearance of your fountain.
- Cleaning: Clean the fountain and pump regularly (e.g., monthly) to prevent algae buildup, mineral deposits, and clogs. Disconnect power, drain the water, and use a soft brush and mild soap solution. Rinse thoroughly.
- Pump Care: Periodically remove the pump and clean its impeller and intake screen. This helps maintain optimal water flow.
- Water Quality: Use distilled water to minimize mineral buildup. If using tap water, consider adding a fountain algaecide or clarifier (follow product instructions).
- Winterization: Before the first freeze, disconnect power, drain all water from the fountain and pump. Clean the fountain thoroughly. Store the pump indoors in a bucket of water (to keep seals moist) or a dry, frost-free location. Cover the fountain or store it indoors to protect it from harsh winter conditions.
Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow | Pump not plugged in; insufficient water level; clogged pump/tubing; power outage. | Check power connection; add water; clean pump/tubing; check circuit breaker. |
| Weak water flow | Low water level; clogged pump/tubing; pump flow adjustment set too low. | Add water; clean pump/tubing; adjust pump flow rate (if applicable). |
| Excessive splashing | Water flow too high; uneven surface; strong winds. | Adjust pump flow rate; ensure fountain is on a level surface; consider windbreaks. |
| Water discoloration/algae | Lack of cleaning; direct sunlight. | Clean fountain regularly; use algaecide; consider partial shade. |
Specifications
Detailed product specifications for your reference.
- Model Number: 60920
- Dimensions: 54 inches (H) x 21 inches (W) x 21 inches (D)
- Base Dimensions: 16.25 inches (W) x 16.25 inches (D) x 21.25 inches (H)
- Weight: 30 lbs
- Material: Lightweight Resin
- Water Capacity: Approximately 3 Gallons
- Power Source: Plug-in Electric
- Cord Length: 8 feet
- Features: Four lion head water spouts, weathered faux stone finish
Image: Side view of the fountain with height and width dimensions indicated.
Warranty Information
This John Timberland Royal Lion Outdoor Fountain is covered by a limited 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage due to improper installation, misuse, neglect, freezing temperatures, or unauthorized repairs.
Customer Support
For further assistance, questions, or to report any issues with your John Timberland Royal Lion Outdoor Fountain, please contact John Timberland customer service. Refer to your purchase documentation or the retailer's website for specific contact details.