1. Introduction
This instruction manual provides essential information for the safe installation, operation, and maintenance of your Schonbek Sterling 12-Light Chandelier. Please read this manual thoroughly before beginning installation or use, and retain it for future reference. This chandelier features Clear Heritage Hand-Cut Crystals and a Polished Silver finish, designed for indoor use only.
2. Important Safety Information
WARNING: Risk of Electric Shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- Installation must be performed by a qualified electrician in accordance with all local electrical codes.
- Ensure the mounting surface can support the weight of the fixture.
- This fixture is rated for dry/indoor locations only (UL, cUL, CSA certified). Do not install in damp or wet areas.
- Use only the specified bulb type and wattage: 12 X E12 Candelabra Base B10 120V Light Bulbs, 60W Max.
- Do not exceed the maximum wattage.
- Handle crystal components with care to prevent damage.
- Keep packaging materials away from children.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- Chandelier Frame with 12 Light Sockets
- Crystal Components (beads, drops, pears, crystal ball finial)
- Mounting Hardware (canopy, chain, mounting plate, screws, wire nuts)
- Instruction Manual
Figure 3.1: Overview of the Schonbek Sterling 12-Light Chandelier.
4. Assembly and Installation
Assembly is required for this chandelier. Professional installation is recommended.
- Prepare for Installation: Turn off power at the main circuit breaker. Clear the work area and gather necessary tools (screwdriver, wire strippers, ladder, etc.).
- Mounting the Fixture: Secure the mounting plate to the junction box in the ceiling. Attach the chain to the chandelier frame and the canopy. The chain length can be adjusted up to a maximum of 40 inches.
- Wiring: Connect the chandelier's electrical wires to the house wiring according to local electrical codes. Ensure all connections are secure with wire nuts.
- Securing the Canopy: Push the canopy up to the ceiling and secure it in place.
- Attaching Crystals: Carefully attach all crystal components to the chandelier frame as per the included diagram (not provided in this manual, refer to product packaging for specific crystal placement).
Figure 4.1: Detail of the chandelier's crystal elements, which require careful attachment during assembly.
5. Operating Instructions
Once installed, your chandelier is ready for use.
- Bulb Installation: Install 12 E12 Candelabra Base B10 120V light bulbs (60W Max each, sold separately). Both incandescent and LED lamps are compatible.
- Power On: Restore power at the circuit breaker.
- Dimming Functionality: This chandelier supports smooth and continuous dimming when connected to a compatible dimmer switch (not included). The control method is typically via a wall switch, which may be a touch-sensitive type.
6. Maintenance and Cleaning
Regular cleaning will maintain the chandelier's appearance and brilliance. Due to the intricate crystal design, cleaning requires care.
- Dusting: Gently dust the chandelier and crystals with a soft, lint-free cloth or a feather duster regularly.
- Deep Cleaning: For a more thorough cleaning, turn off the power to the fixture. Use a mild glass cleaner specifically designed for crystals, applied to a soft cloth. Do not spray cleaner directly onto the chandelier to avoid damaging electrical components or metal finishes. Wipe each crystal carefully.
- Metal Finish: Clean the polished silver finish with a soft, dry cloth. Avoid abrasive cleaners or polishes that could scratch or dull the finish.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power, loose wiring, faulty bulb, tripped circuit breaker. | Check circuit breaker. Ensure power is on. Verify all wire connections. Replace bulbs. |
| Lights flicker or dim inconsistently. | Loose bulb, incompatible dimmer, faulty wiring. | Tighten bulbs. Ensure dimmer is compatible with LED/incandescent bulbs. Consult an electrician for wiring issues. |
| Chandelier appears unstable. | Improper mounting, loose hardware. | Ensure mounting hardware is securely fastened to the junction box and ceiling structure. Re-check all connections. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Schonbek |
| Model Name | Sterling |
| Model Number | 3601-40H |
| Dimensions (L x W x H) | 29" x 29" x 30" |
| Item Weight | 26 Pounds |
| Color | Polished Silver |
| Material | Alloy Steel, Crystal |
| Shade Material | Crystal |
| Number of Light Sources | 12 |
| Bulb Base | E12 Candelabra Base |
| Max Wattage per Bulb | 60W |
| Voltage | 120V (US style) |
| Total Wattage | 720 watts (12 x 60W) |
| Light Output Maximum | 5040 Lumens |
| Color Temperature | 3000 Kelvin |
| Mounting Type | Ceiling Mount |
| Indoor/Outdoor Usage | Indoor Only |
| Certifications | UL, cUL, CSA |
| Assembly Required | Yes |
9. Warranty and Support
Warranty: This Schonbek Sterling Chandelier comes with a 5-year residential limited warranty. Please retain your proof of purchase for warranty claims.
Customer Support: For technical assistance, replacement parts, or warranty inquiries, please contact Schonbek customer service. Refer to the official Schonbek website or your purchase documentation for contact details.
