Amisco Rocky Panel Bed Instruction Manual

Introduction

Thank you for choosing the Amisco Rocky Panel Bed. This manual provides essential information for the safe assembly, proper use, and maintenance of your new bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

• Always assemble the bed on a soft, clean surface to prevent damage to the product or your floor.
• Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
• Do not allow children to climb on or play with the bed frame during assembly or once assembled.
• Use only the mattress size recommended for your bed frame.
• Keep small parts out of reach of children during assembly.
• This product is designed for indoor use only.

Parts List

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact Amisco customer service.

• Headboard
• Footboard
• Side Rails (2)
• Slats (Quantity may vary by size)
• Hardware Pack (bolts, washers, nuts, Allen key)

Setup and Assembly Instructions

Assembly typically requires two adults. Please follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface. Identify each component using the parts list.
2. Attach Side Rails to Headboard: Align the side rails with the pre-drilled holes on the headboard posts. Insert the appropriate bolts and washers, and loosely tighten with the provided Allen key.
3. Attach Side Rails to Footboard: Repeat the previous step to attach the other end of the side rails to the footboard posts. Ensure the bed frame is square.
4. Tighten All Hardware: Once all four connections are made, fully tighten all bolts using the Allen key. Do not overtighten.
5. Install Slats: Place the bed slats across the side rails. Depending on the design, they may rest on ledges or attach with screws. Ensure they are evenly spaced and secure.
6. Final Check: Verify that the bed frame is stable and all connections are secure.

Operating Instructions (Usage)

• Place your mattress directly onto the installed slats. A box spring may not be necessary depending on your mattress type and desired bed height.
• Ensure the bed is placed on a level surface to prevent wobbling.
• Avoid jumping on the bed, as this can damage the frame and slats.

Maintenance

• Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Hardware Check: Periodically (every 3-6 months) check all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
• Environmental Care: Keep the bed away from direct sunlight and extreme temperature changes to preserve the finish.

Troubleshooting

• Squeaking Noises:

  Solution: Check all bolts and connections. Tighten any loose hardware. Ensure slats are properly seated and not rubbing against the frame. Applying a small amount of lubricant (e.g., silicone spray) to contact points between metal parts can also help.
• Bed Feels Unstable/Wobbly:

  Solution: Verify that all assembly steps were followed correctly and all hardware is fully tightened. Ensure the bed is on a level floor. If the floor is uneven, use furniture glides or shims under the bed legs to stabilize it.

• Damaged or Missing Parts:

  Solution: Do not attempt to use the bed with damaged or missing parts. Contact Amisco customer service for replacement parts.

Specifications

Warranty and Support

Amisco products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Amisco website. If you require assistance with assembly, missing parts, or have any questions regarding your Amisco Rocky Panel Bed, please contact Amisco customer service directly.

For further information, you may visit the Amisco Store on Amazon.