1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Taylor Digital Timer, Model 5827-21. Designed for precision and ease of use, this timer is suitable for various applications including cooking, baking, exercise, and study. Please read this manual thoroughly to ensure proper use and longevity of your device.
Image 1.1: Front view of the Taylor Digital Timer, highlighting its clear display and control buttons.
2. Product Features
- Multifunctional: Operates as both a count-up stopwatch and a count-down timer.
- Clear Display: Features a 0.75-inch digital readout for easy visibility from a distance.
- Wide Range: Capable of displaying time up to 99 minutes and 59 seconds.
- Versatile Mounting: Includes a built-in clip, stand, and magnet for flexible placement options.
- Battery Included: Comes with 1 AAA battery for immediate use.
3. Setup
3.1. Battery Installation
- Locate the battery compartment cover on the back of the timer.
- Slide the cover off in the direction indicated by the arrow.
- Insert one (1) AAA battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover until it clicks securely into place.
3.2. Placement Options
The Taylor Digital Timer offers multiple ways to position it for convenience:
- Stand: Utilize the integrated fold-out stand on the back to place the timer upright on a countertop or desk.
- Magnet: Attach the timer to any magnetic surface, such as a refrigerator door or metal cabinet, using the magnet located on the back.
- Clip: Use the built-in clip to secure the timer to an apron, pocket, or other suitable edge.
4. Operating Instructions
4.1. Setting the Countdown Timer
- Press the MIN button to set the desired minutes. Each press increases the minute count. Holding the button down will advance the minutes rapidly.
- Press the SEC button to set the desired seconds. Each press increases the second count. Holding the button down will advance the seconds rapidly.
- To start the countdown, press the large START/STOP button. The display will begin counting down.
- When the timer reaches zero, an audible alarm will sound. Press the START/STOP button to silence the alarm.
4.2. Using the Count-Up (Stopwatch) Function
- Ensure the timer display shows "00 M 00 S". If not, press the MIN and SEC buttons simultaneously to reset the timer.
- Press the START/STOP button to begin counting up. The display will show elapsed time.
- To pause the count-up, press the START/STOP button again.
- To resume, press START/STOP once more.
4.3. Stopping and Resetting the Timer
- To pause an active countdown or count-up, press the START/STOP button.
- To reset the timer to "00 M 00 S", press the MIN and SEC buttons simultaneously while the timer is stopped or paused.
5. Maintenance
5.1. Cleaning
To clean your timer, wipe it with a soft, damp cloth. Do not immerse the timer in water or use abrasive cleaners, as this can damage the electronic components and display.
5.2. Battery Replacement
When the display becomes dim or the timer functions erratically, it is time to replace the battery. Follow the battery installation steps in Section 3.1. Always dispose of used batteries responsibly according to local regulations.
6. Troubleshooting
- Timer not turning on or display is blank: Ensure the AAA battery is correctly installed with the correct polarity. Replace the battery if it is old or depleted.
- Display is dim or flickering: This usually indicates a low battery. Replace the AAA battery.
- Buttons are unresponsive: Try removing and reinserting the battery to perform a soft reset. Ensure buttons are not obstructed.
- Alarm is not sounding: Check if the timer is set to a non-zero time for countdown. Ensure the battery has sufficient power.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | 5827-21 |
| Brand | Taylor |
| Color | White |
| Material | Plastic |
| Product Dimensions | 2.1"D x 2.6"W x 1"H |
| Item Weight | 1.76 ounces (0.11 Pounds) |
| Maximum Time Setting | 99 Minutes, 59 Seconds |
| Screen Size | 0.75 Inches |
| Battery Type | 1 x AAA (included) |
| UPC | 077784582725 |
8. Warranty and Support
8.1. Warranty Information
Taylor products are manufactured to high-quality standards. For specific warranty details regarding your Taylor Digital Timer (Model 5827-21), please refer to the packaging or visit the official Taylor website. Keep your purchase receipt as proof of purchase for any warranty claims.
8.2. Customer Support
If you encounter any issues not covered in this manual or require further assistance, please contact Taylor customer support. Contact information can typically be found on the product packaging or the official Taylor website (www.taylorusa.com).
