Technoline WQ 170 Portable Travel Alarm Clock User Manual

Introduction

Thank you for choosing the Technoline WQ 170 Portable Travel Alarm Clock. This compact and versatile device offers a range of features including a quartz clock, 12/24 hour time display, date and day of the week in multiple languages, indoor temperature, dual alarms with snooze, and world time for 32 cities. This manual provides detailed instructions to help you set up and operate your new alarm clock effectively.

Important Safety Information

• Keep the device away from extreme temperatures, direct sunlight, and high humidity.
• Do not expose the device to water or other liquids.
• Use only the specified battery type (1 x AAA). Ensure correct polarity when inserting batteries.
• Remove batteries if the device will not be used for an extended period to prevent leakage.
• Do not attempt to disassemble or repair the device yourself. Refer all servicing to qualified personnel.
• Keep out of reach of children.

Package Contents

• Technoline WQ 170 Portable Travel Alarm Clock
• User Manual (this document)

Note: 1 x AAA battery is required and not included in the package.

Product Overview

Familiarize yourself with the components and controls of your Technoline WQ 170 alarm clock.

Image 1: Front view of the Technoline WQ 170 alarm clock, displaying the time, date, and temperature. The control buttons are visible at the bottom, and the SNOOZE/LIGHT bar is at the top.

Display Elements:

• Time Display: Shows current time in 12 or 24-hour format.
• Date & Day Display: Shows the current date and day of the week.
• Temperature Display: Shows indoor temperature.
• Alarm Indicators: Icons to show if alarms are active.
• World Time Indicator: Shows when world time is displayed.

Control Buttons:

• MODE/SET Button: Used to switch between display modes and enter setting mode.
• UP (▲) Button: Used to increase values or scroll through options.
• DOWN (▼) Button: Used to decrease values or scroll through options.
• ALARM/WORLD Button: Used to activate/deactivate alarms or switch to world time display.
• SNOOZE/LIGHT Bar: Located at the top, press to activate backlight or snooze a sounding alarm.

Setup

1. Battery Installation

1. Locate the battery compartment on the back of the alarm clock.
2. Open the battery compartment cover.
3. Insert one (1) AAA battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Close the battery compartment cover securely.

The clock will power on automatically. You may hear a short beep, and the display will show default settings.

Operating Instructions

Setting Time and Date

1. In normal time display mode, press and hold the MODE/SET button for approximately 3 seconds to enter time setting mode. The hour digits will start flashing.
2. Use the UP (▲) or DOWN (▼) buttons to adjust the hour.
3. Press MODE/SET again to confirm the hour and move to minute setting. The minute digits will flash.
4. Use the UP (▲) or DOWN (▼) buttons to adjust the minutes.
5. Continue pressing MODE/SET to cycle through and set the following: Year → Month → Day → 12/24 Hour Format → Language for Day of Week (7 options).
6. Use the UP (▲) or DOWN (▼) buttons to adjust each value.
7. Press MODE/SET one last time to exit setting mode and save your changes.

Setting Alarms (Alarm 1 and Alarm 2)

1. In normal time display mode, press the ALARM/WORLD button once to display Alarm 1 time.
2. Press the ALARM/WORLD button again to display Alarm 2 time.
3. To set an alarm, while the desired alarm time (e.g., AL1) is displayed, press and hold the MODE/SET button for approximately 3 seconds. The alarm hour digits will flash.
4. Use the UP (▲) or DOWN (▼) buttons to adjust the alarm hour.
5. Press MODE/SET to confirm the hour and move to alarm minute setting.
6. Use the UP (▲) or DOWN (▼) buttons to adjust the alarm minutes.
7. Press MODE/SET to exit alarm setting mode.
8. To activate or deactivate an alarm, press the ALARM/WORLD button to display the alarm time, then press the UP (▲) button. An alarm icon will appear on the display when active.

Snooze Function and Backlight

• When an alarm sounds, press the SNOOZE/LIGHT bar at the top of the clock to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes).
• To turn off a sounding alarm completely, press any other button (e.g., MODE/SET, ALARM/WORLD).
• To activate the backlight, press the SNOOZE/LIGHT bar at any time. The backlight will illuminate for a few seconds.

World Time Display

1. In normal time display mode, press the ALARM/WORLD button repeatedly until the world time display appears. The display will show the time for a selected city.
2. Use the UP (▲) or DOWN (▼) buttons to scroll through the 32 available world cities.
3. The clock can synchronize local and world time. Refer to the display for indicators.
4. Press MODE/SET to return to normal time display.

Temperature Display

The indoor temperature is continuously displayed on the screen. No specific setting is required for this feature.

Maintenance

• Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: When the display becomes dim or the clock functions erratically, it's time to replace the battery. Follow the "Battery Installation" steps in the Setup section. Dispose of used batteries responsibly.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the point of purchase or visit the official Technoline website. Keep your purchase receipt as proof of purchase.

For further assistance, you may contact Technoline customer service through their official channels.