Introduction
This instruction manual provides essential information for the proper handling, installation, and maintenance of your MOOG 81010 Coil Spring Set. MOOG Problem Solver products are engineered with proven design features to ensure like-new steering performance, ease of installation, and extended service life. Adhering to these guidelines will help ensure optimal performance and safety.
Product Overview
The MOOG 81010 Coil Spring Set is a critical component for your vehicle's suspension system, designed to restore ride height and handling characteristics. These coil springs are 100% load tested to ensure consistent performance and are designed to lower stresses for a longer service life, providing like-new steering feel.
Image: Two black MOOG 81010 coil springs, designed for vehicle suspension systems.
Compatibility
This coil spring set is compatible with the following vehicle models:
- 2003-2014 Chevrolet Express 1500
- 2003-2016 Chevrolet Express 2500
- 2003-2005 Chevrolet Express 2500
- 2003-2014 GMC Savana 1500
- 2003-2016 GMC Savana 2500
- 2003-2005 GMC Savana 2500
Before purchasing or installing, it is crucial to research and ensure that the part will fit your specific vehicle. Always enter all vehicle information (year, make, model, engine, and trim) for compatibility verification and check any qualifier notes.
What's in the Box
Your MOOG 81010 Coil Spring Set package should contain:
- Coil Spring Set
Installation Guidelines
Installation of suspension components should be performed by a qualified professional. Improper installation can lead to vehicle damage or personal injury. The MOOG 81010 Coil Spring Set is designed for easy installation, but professional expertise is recommended.
- Ensure the vehicle is safely supported on a lift or sturdy jack stands on a level surface.
- Refer to your vehicle's specific service manual for detailed removal and installation procedures for coil springs.
- Carefully remove the old coil springs, noting their orientation and any associated components.
- Install the new MOOG 81010 Coil Springs, ensuring proper seating in the spring pockets and alignment with all mounting points.
- Reassemble all components, including shocks, struts, and control arms, according to manufacturer specifications.
- After installation, it is highly recommended to perform a professional wheel alignment to prevent premature tire wear and ensure proper vehicle handling.
Safety Warning:
Coil springs are under significant compression and can cause serious injury if not handled correctly. Always use appropriate spring compressors and personal protective equipment (PPE) during removal and installation.
Maintenance and Care
MOOG coil springs are designed for long service life. To ensure continued optimal performance and longevity, regular vehicle inspections are recommended:
- Periodically inspect coil springs for any signs of damage, such as cracks, corrosion, or deformation.
- Address any issues with worn or sagging coil springs promptly, as they can cause premature tire wear due to vehicle misalignment and negatively impact ride quality.
- Keep suspension components clean to prevent the accumulation of dirt, salt, and debris, which can accelerate wear.
Troubleshooting
If you experience issues after installing your MOOG 81010 Coil Spring Set, consider the following common points:
- Uneven Ride Height: Verify that the correct springs were installed on the correct side of the vehicle (if applicable) and that they are properly seated in their mounts.
- Excessive Noise: Check for loose fasteners or components rubbing against each other. Ensure all suspension components are torqued to the vehicle manufacturer's specifications.
- Premature Tire Wear: This is often a symptom of worn or sagging coil springs, or improper wheel alignment after installation. A professional alignment is crucial after any suspension work.
For persistent or complex issues, it is always best to consult a certified automotive technician.
Specifications
| Feature | Detail |
|---|---|
| Brand | MOOG |
| Model | Coil Spring Set |
| Item Model Number | 81010 |
| Item Weight | 0.01 ounces |
| Product Dimensions | 20 x 11.13 x 5.25 inches |
| Country of Origin | USA |
| Manufacturer | MOOG Chassis Products |
Warranty and Support
For information regarding warranty coverage and technical support for your MOOG 81010 Coil Spring Set, please refer to the official MOOG website or contact MOOG customer service directly. MOOG is committed to providing quality products and support.
MOOG Customer Support:
- Website: www.moogparts.com
- Contact Information: Please check the website for the most current contact details, including phone numbers and email addresses.
