1. Product Overview
The KOHLER K-8013-CP WaterTile Round 27-Nozzle Body Spray is designed to provide an invigorating hydrotherapy experience. This body spray features a low-profile design that integrates seamlessly with various bathroom decors, lying virtually flush to the wall. It is equipped with 27 nozzles to deliver a high-volume, stimulating spray.
- Single-function 27-nozzle body spray: Delivers a stimulating spray pattern.
- Fully adjustable spray face: Pivots for targeted hydro massage, allowing for versatile installation options.
- Low-profile design: Complements various bathroom aesthetics.
- MasterClean™ spray nozzles: Designed for easy cleaning and maintenance.
- 1/2-Inch NPT connections: Standard plumbing connections for installation.
Figure 1: KOHLER K-8013-CP WaterTile Round 27-Nozzle Body Spray. This image shows the complete body spray unit in its polished chrome finish.
2. Setup and Installation
Proper installation is crucial for the optimal performance of your WaterTile body spray. It is recommended that installation be performed by a qualified plumber in accordance with local plumbing codes.
2.1 Pre-Installation Considerations
- Ensure all necessary plumbing lines are in place and accessible.
- Verify that the water supply is turned off before beginning installation.
- Confirm that the wall surface is prepared for flush-mount installation.
2.2 Installation Steps (General)
- Prepare Plumbing: Connect the 1/2-inch NPT supply line to the body spray's inlet. Ensure all connections are watertight using appropriate sealants.
- Mount Body Spray: Secure the body spray housing into the wall opening. The design allows for a virtually flush installation.
- Attach Trim: Install the decorative trim plate and spray face, ensuring it is properly aligned and secured.
- Test Connections: Turn on the water supply and check for any leaks.
Figure 2: Component view of the WaterTile Body Spray. This image highlights the internal structure or a specific part of the body spray, demonstrating its compact design for flush installation.
3. Operation
The WaterTile body spray is designed for simple operation, providing a consistent and targeted massage spray.
3.1 Activating the Body Spray
The body spray is activated via your shower's diverter or control valve. Consult your shower system's manual for specific instructions on how to divert water flow to the body spray.
3.2 Adjusting the Spray Face
The spray face of the WaterTile body spray is fully adjustable. You can pivot the spray face to direct the water flow to your desired area, allowing for a customized hydro massage experience.
Figure 3: Water spray pattern from the WaterTile Body Spray. This image illustrates the invigorating, high-volume spray delivered by the 27 nozzles.
Video 1: Demonstration of WaterTile Round Targeted Massage Spray. This video visually demonstrates the powerful and targeted water flow from the KOHLER WaterTile Round body spray, highlighting its massage spray function.
4. Care and Maintenance
Regular cleaning will help maintain the appearance and performance of your KOHLER WaterTile body spray.
4.1 Cleaning the Finish
- Clean the polished chrome finish with a soft, damp cloth.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish.
- For stubborn spots, use a mild soap solution and rinse thoroughly.
4.2 Cleaning MasterClean™ Nozzles
The MasterClean™ spray nozzles are designed for easy lime scale removal. Simply wipe the rubber nozzles with your finger or a soft cloth to dislodge mineral buildup.
5. Troubleshooting
If you experience issues with your WaterTile body spray, refer to the common problems and solutions below.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure from body spray | Partially closed supply valve; Clogged nozzles; Low household water pressure. | Ensure supply valve is fully open; Clean MasterClean™ nozzles; Consult a plumber to check household water pressure. |
| Water leaks around the body spray trim | Improperly sealed connections; Damaged O-rings or gaskets. | Turn off water supply and re-check all plumbing connections for proper sealing; Inspect and replace any damaged O-rings or gaskets. |
| No water flow | Water supply turned off; Diverter not fully engaged. | Ensure main water supply is on; Verify shower diverter is correctly set to direct water to the body spray. |
If the problem persists after attempting these solutions, please contact KOHLER customer service or a qualified plumber.
6. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Kohler |
| Model Number | K-8013-CP |
| Style | Classic |
| Shape | Round |
| Finish Type | Polished |
| Color | Polished Chrome |
| Number of Settings | 1 (Massage) |
| Number of Jets | 27 |
| Connection Size | 1/2-Inch NPT |
| Item Weight | 1.85 Pounds |
| Manufacturer | KOHLER |
| ASIN | B001F7IG8K |
| GTIN/UPC | 650531594709 |
7. Warranty and Customer Support
7.1 Manufacturer's Warranty
This KOHLER product is covered by a Lifetime Limited Warranty. Please refer to the official KOHLER warranty documentation for full terms and conditions, including coverage details and limitations.
7.2 Customer Support
For technical assistance, replacement parts, or warranty claims, please contact KOHLER customer service directly. You can find contact information on the official KOHLER website or through the retailer where the product was purchased.
KOHLER Website: www.kohler.com