Introduction
This instruction manual provides important information regarding the installation, operation, and maintenance of your Keuco Plan Toilet Brush Set, Model 14972170200. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Retain this manual for future reference.
Safety Information
- Ensure all components are present and undamaged before installation.
- Use appropriate tools for installation.
- Mount the product securely to a suitable wall surface to prevent injury or damage.
- Keep cleaning agents and the brush head out of reach of children.
- Do not use abrasive cleaners on the aluminum surfaces.
Package Contents
Verify that all the following items are included in your package:
- Toilet brush holder (silver-anodised aluminum)
- Removable plastic insert
- Black toilet brush with handle
- Spare brush head
- Corrosion-free fastening material (screws, wall plugs)
Image: The Keuco Plan Toilet Brush Set, showing the silver-anodised aluminum holder and the black brush.
Setup and Installation
The Keuco Plan Toilet Brush Set is designed for wall mounting. Follow these steps for secure installation:
- Choose Location: Select a suitable wall location near the toilet, ensuring sufficient space for use and cleaning.
- Mark Drilling Points: Use the provided fastening material or the product's mounting plate as a template. Mark the two drilling points on the wall. Refer to the dimension diagram for precise measurements.
- Drill Holes: Drill two holes at the marked points using an appropriate drill bit for your wall type. Insert the wall plugs into the drilled holes.
- Mount Holder: Align the toilet brush holder with the drilled holes and secure it to the wall using the provided screws. Ensure it is firmly attached and level.
- Insert Plastic Liner: Place the removable plastic insert into the aluminum holder.
- Place Brush: Insert the black toilet brush into the plastic liner within the holder.
Image: Technical drawing illustrating the dimensions and mounting points for the toilet brush holder. The holder has a height of 135mm and a diameter of 90mm. The wall plate has a width of 95mm. The total height with the brush is 400mm. The mounting points are 35mm apart horizontally and 120mm from the bottom of the holder to the top mounting point.
Operating Instructions
To use the Keuco Plan Toilet Brush Set:
- Remove the toilet brush from its holder.
- Clean the toilet bowl as needed.
- After use, allow excess water to drip off the brush into the toilet bowl.
- Return the brush to its holder. The plastic insert is designed to collect any remaining drips.
Maintenance
Regular cleaning and maintenance will ensure the hygiene and appearance of your toilet brush set.
- Cleaning the Holder: The removable plastic insert can be easily lifted out for cleaning. Wash it with warm soapy water and disinfect as necessary. Rinse thoroughly and dry before returning it to the aluminum holder.
- Cleaning the Exterior: Wipe the silver-anodised aluminum holder with a soft, damp cloth. Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish.
- Brush Head Replacement: The brush head is designed to be replaceable. Unscrew the old brush head from the handle and screw on the spare brush head provided. Dispose of the old brush head responsibly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Holder feels loose on the wall. | Screws are not tightened sufficiently or wall plugs are not secure. | Tighten the mounting screws. If the problem persists, check the wall plugs and wall integrity. |
| Brush head appears worn or ineffective. | Normal wear and tear. | Replace the brush head with the spare provided or purchase a new compatible brush head. |
| Unpleasant odor from the holder. | Plastic insert requires cleaning. | Remove and thoroughly clean and disinfect the plastic insert. Ensure it is dry before reinserting. |
Specifications
- Brand: Keuco
- Model: 14972170200
- Material: Silver-anodised Aluminum (holder), Plastic (insert, brush handle, brush head)
- Color: Silver (holder), Black (brush)
- Holder Dimensions (approx.): Height 135 mm, Diameter 90 mm
- Wall Plate Width (approx.): 95 mm
- Total Height (with brush, approx.): 400 mm
- Item Weight: 620 Grams (approx. 1.37 pounds)
- Installation Method: Wall-mounted
- Special Feature: Removable plastic insert, Replaceable brush head
Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Keuco products are known for their quality and durability. For technical support or inquiries regarding replacement parts, please contact Keuco customer service or your authorized dealer.
You can often find contact information on the official Keuco website or through your original point of purchase.
