Kodak EasyShare M1073IS Digital Camera User Manual

1. Introduction

The Kodak EasyShare M1073IS digital camera is designed for capturing still images and videos with ease. It features a 10.2-megapixel CCD sensor and a 3x optical zoom lens with sensor-shift image stabilization to help reduce blur. This camera is part of the Kodak EasyShare system, which simplifies the process of managing and sharing your pictures. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your camera.

2. Box Contents

Please verify that all items listed below are included in your camera package:

• Kodak EasyShare M1073IS Digital Camera
• Kodak Li-Ion Rechargeable Digital Camera Battery KLIC-7001
• AC adapter for in-camera charging
• USB cable
• Wrist strap
• Getting Started Guide with Kodak EasyShare Software
• Custom camera insert for optional Kodak EasyShare Camera and Printer Docks

3. Setup

3.1. Battery Installation and Charging

Locate the battery compartment door on the bottom of the camera. Open the door and insert the Kodak KLIC-7001 Lithium-Ion battery, ensuring the correct orientation as indicated inside the compartment. Close the door securely. To charge the battery, connect the camera to the AC adapter using the provided USB cable. The camera supports in-camera charging.

3.2. Memory Card Insertion

The camera has 32MB of internal memory. For practical usage and to store more photos and videos, it is recommended to use an optional SD or SDHC memory card (up to 32 GB). Locate the memory card slot, typically near the battery compartment. Insert the memory card with the metal contacts facing the correct direction until it clicks into place.

3.3. Attaching the Wrist Strap

Thread the included wrist strap through the strap eyelet on the camera body. Secure the strap to prevent accidental drops.

4. Operating the Camera

4.1. Powering On/Off

Press the Power button, usually located on the top of the camera, to turn the camera on or off. The 2.7-inch LCD display will illuminate.

4.2. Taking Still Photos

1. Select Mode: Use the mode dial or button to select the desired shooting mode (e.g., Auto, Program, Scene modes like Landscape, Night Portrait, Sports).
2. Frame Your Shot: Use the LCD display to compose your image.
3. Focus: Press the shutter button halfway down to allow the camera to autofocus. The camera uses multi-area, center, contrast detection, and live view autofocus technologies.
4. Capture: Press the shutter button completely down to take the picture. The camera captures images at up to 10.2 megapixels (3680x2760 resolution) in JPEG format.

4.3. Recording Videos

1. Switch to Video Mode: Locate the video recording button or switch the mode dial to video mode.
2. Start Recording: Press the video record button to begin recording. A red indicator or timer will appear on the LCD.
3. Stop Recording: Press the video record button again to stop recording. Videos are recorded in QuickTime MOV motion JPEG format at 640x480 resolution at 15 frames per second.

4.4. Using Zoom

Use the zoom lever, typically located around the shutter button, to adjust the focal length. The camera features a 3x optical zoom for clear magnification and a 5x continuous advanced digital zoom for further enlargement.

4.5. Flash Modes

The built-in flash can be adjusted using the flash mode button. Available modes include Auto, Fill-in (On), Off, and Slow Synch, allowing you to control lighting in various conditions.

4.6. Reviewing Images and Videos

Press the Review or Playback button to view your captured photos and videos on the 2.7-inch high-resolution LCD display. Use the directional pad to navigate through your media.

5. Maintenance

5.1. Cleaning the Camera

• Lens: Use a soft, lint-free cloth or a lens brush to gently remove dust and smudges. Avoid harsh chemicals.
• LCD Screen: Wipe the screen with a soft, dry cloth. For stubborn smudges, use a screen cleaner designed for electronics.
• Camera Body: Use a soft, dry cloth to wipe the camera body.

5.2. Battery Care

Store the battery in a cool, dry place when not in use. Avoid fully discharging the battery frequently to prolong its lifespan. Use only the specified Kodak KLIC-7001 battery and charger.

5.3. Storage

When not in use, store the camera in a protective case to shield it from dust, moisture, and physical impact. Remove the battery if the camera will not be used for an extended period.

6. Troubleshooting

6.1. Camera Does Not Power On

• Ensure the battery is correctly inserted and fully charged.
• Try charging the battery for at least 30 minutes.
• Check if the battery contacts are clean.

6.2. Blurry Images

• Ensure the camera has focused correctly before taking the shot (press shutter halfway).
• Hold the camera steady. The sensor-shift image stabilization helps, but excessive movement can still cause blur.
• Check lighting conditions. In low light, use the flash or a higher ISO setting if available.
• Clean the camera lens.

6.3. Memory Card Error

• Ensure the memory card is inserted correctly.
• Try reformatting the memory card (this will erase all data).
• Test with a different, compatible SD/SDHC memory card.

6.4. Dark Indoor Photos

• Ensure the flash is set to Auto or On.
• Increase ambient lighting if possible.
• Check if the flash is obstructed.

7. Specifications

8. Warranty and Support

Your Kodak EasyShare M1073IS Digital Camera is covered by a limited warranty. Please refer to the warranty card included in your original packaging for specific terms and conditions. For technical support, service, or additional product information, please visit the official Kodak support website or the Kodak brand store.

You can find more information and support resources at the KODAK Store on Amazon.