Mount-It! MI-501B

Download PDF
Contents

Mount-It! MI-501B Ceiling TV Mount Instruction Manual

Model: MI-501B | Brand: Mount-It!

Introduction

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Mount-It! MI-501B Ceiling TV Mount. This full-motion mount is designed to securely hold televisions ranging from 32 to 86 inches, with a maximum weight capacity of 175 lbs and VESA patterns up to 800x450mm. Please read this manual thoroughly before beginning installation and keep it for future reference.

Safety Information

WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. If you have any questions, please contact Mount-It! customer support.

  • Ensure the mounting surface (ceiling) can safely support the combined weight of the mount and the television.
  • Do not mount directly onto drywall. The mount must be secured to solid wood ceiling joists, concrete, or brick.
  • Always use a stud finder to locate ceiling joists accurately.
  • Do not exceed the maximum weight capacity of 175 lbs (79.4 kg).
  • Do not exceed the maximum VESA pattern of 800x450mm.
  • Use appropriate safety equipment during installation, including eye protection and gloves.
  • Two people are recommended for installation, especially when lifting the television.
  • Keep children and pets away from the installation area.

Package Contents

Please verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Mount-It! customer support.

  • Ceiling Plate Assembly
  • Telescoping Pole
  • TV Mounting Bracket (Horizontal Bar)
  • TV VESA Arms (Vertical)
  • Mounting Hardware Kit (Lag bolts, washers, spacers, TV screws)
  • Anti-Theft Locking Bar
  • Instruction Manual

Setup and Installation

Step 1: Prepare the Ceiling

Locate the ceiling joists (studs) using a reliable stud finder. Mark the center of the joists where the ceiling plate will be installed. Ensure the chosen location provides adequate clearance for your TV and desired viewing angles.

Easy Installation: Ceiling mount attached to concrete, wood joists, and brick ceilings.

Image: The Mount-It! ceiling mount is suitable for concrete, brick, and wood ceiling joists. Do not mount directly onto drywall.

Step 2: Attach the Ceiling Plate

Position the ceiling plate against the marked location on the ceiling. Drill pilot holes into the center of the ceiling joists through the designated holes in the ceiling plate. Secure the ceiling plate using the provided lag bolts and washers. Ensure the plate is firmly attached and level.

Note: The installation video demonstrates drilling pilot holes and securing the ceiling plate.

Step 3: Assemble the Telescoping Pole and TV Bracket

Connect the telescoping pole to the ceiling plate. Adjust the pole to your desired height, then secure it using the provided pins or screws. Attach the horizontal TV mounting bracket to the bottom of the telescoping pole. Ensure all connections are tight and secure.

Product Dimensions: Front view, side view, and ceiling plate dimensions of the Mount-It! MI-501B ceiling TV mount.

Image: Detailed product dimensions, including the telescoping pole's adjustable height from 22.4" to 31.4".

Step 4: Attach VESA Arms to the TV

Carefully place your TV face down on a soft, clean surface. Attach the vertical VESA arms to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure the VESA arms are centered and securely fastened to the TV's mounting holes. Refer to your TV's manual for specific VESA pattern requirements.

Versatile Fit Across TV Sizes: Diagram showing VESA compatibility from 200x200mm to 800x450mm for TVs 32 to 86 inches, with a 175 lb capacity.

Image: This mount supports VESA patterns from 200x200mm to 800x450mm and TVs from 32" to 86" with a 175 lb capacity.

Step 5: Mount the TV onto the Ceiling Mount

With assistance, carefully lift the television and hook the VESA arms onto the horizontal bar of the ceiling mount. Ensure the TV is properly seated and secured. Use the safety screws or locking mechanisms to prevent accidental dislodgement.

Note: The installation video shows two individuals lifting and securing the TV onto the mount.

Operating Instructions

Adjusting Height

The telescoping pole allows for height adjustment between 22.4 inches and 31.4 inches. To adjust, loosen the locking mechanism on the pole, slide to the desired height, and re-secure the mechanism. Ensure the pole is firmly locked in place after adjustment.

Height Adjustable for Flat Ceilings: Diagram showing the telescoping pole adjusting from 22.4 inches to 31.4 inches, ideal for various ceiling heights.

Image: The mount's height can be adjusted to suit different ceiling heights, ensuring optimal viewing.

Swivel Function

The mount features a 360° swivel capability. Gently rotate the television to achieve your preferred viewing angle. The swivel mechanism is designed for smooth movement.

Tilt Adjustment

The TV can be tilted down by up to 24°. To adjust the tilt, loosen the tilt locking knobs on the VESA arms, set the TV to the desired angle, and then tighten the knobs securely. The tilt function uses a cotter pin and bolt for secure locking at various angles.

Fully Adjustable for Optimal Use: Diagram showing 360° swivel, 24° tilt down, height adjustment up to 31.4 inches, padlock locking bar, cotter pin and bolt, and multiple holes for cable management.

Image: This diagram illustrates the full range of adjustments, including swivel, tilt, and height, along with security features.

Cable Management

Utilize the integrated cable management system by routing cables through the telescoping pole. This helps maintain a clean and organized appearance.

Anti-Theft Locking Bar

For added security in public or shared environments, an anti-theft locking bar is included. This bar accepts a standard padlock (not included) to prevent unauthorized removal of the television.

Maintenance

  • Periodically check all screws and bolts to ensure they remain tight and secure.
  • Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
  • Inspect the mount for any signs of wear or damage. If any issues are found, contact customer support.

Troubleshooting

TV is not level

Ensure the ceiling plate is installed perfectly level. If the ceiling plate is level, check the VESA arms on the back of the TV and the horizontal bar for proper alignment and tightness. Minor adjustments can often be made by slightly loosening and re-tightening the VESA arm screws.

TV feels unstable or wobbly

Verify that all mounting hardware, including lag bolts into the ceiling and screws attaching the VESA arms to the TV, are securely tightened. Ensure the telescoping pole's locking mechanism is fully engaged. Confirm that the ceiling structure is robust enough to support the weight.

Difficulty adjusting tilt or swivel

Check if any locking knobs or pins are fully tightened. Loosen them slightly to allow movement, adjust the TV, then re-tighten. If movement is still stiff, apply a small amount of silicone-based lubricant to the moving parts (avoiding electrical components).

Specifications

FeatureDetail
Model NumberMI-501B
Mounting TypeCeiling Mount
Movement TypeSwivel, Tilt, Height Adjustable
MaterialAlloy Steel
ColorBlack
Compatible DevicesTelevision
Minimum Supported Screen Size32 Inches
Maximum Supported Screen Size86 Inches
Maximum Weight Capacity175 lbs
VESA Compatibility200x200mm to 800x450mm
Height Adjustment Range22.4" to 31.4"
Maximum Tilt Angle24 Degrees Down
Swivel Range360 Degrees

Warranty and Support

The Mount-It! MI-501B Ceiling TV Mount is backed by Mount-It!'s lifetime warranty, ensuring long-term reliability and peace of mind. For technical assistance, missing parts, or any questions regarding installation or operation, please contact our US-based technical support team. Contact information can typically be found on the product packaging or the official Mount-It! website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.