Riccar Type W Brilliance HEPA Filtration Vacuum Cleaner Bags Instruction Manual

1. Product Overview

These are genuine Riccar Type W HEPA filtration vacuum cleaner bags, provided in a convenient 6-pack. Designed for optimal air quality, these bags meet the HEPA filtration standard of 99.97% efficiency at 0.3 microns, effectively capturing fine dust, allergens, and microscopic particles.

The product packaging displays six genuine HEPA filtration vacuum bags, Type W, designed exclusively for Riccar Brilliance All Models. It highlights a HEPA filtration standard of 99.97% efficiency at 0.3 microns and reminds users to change filters for optimal performance.

2. Compatibility

These Riccar Type W HEPA Filtration Vacuum Cleaner Bags are designed exclusively for Riccar Brilliance All Models. Ensure your vacuum cleaner is compatible with Type W bags for proper fit and optimal performance.

3. Installation and Replacement

Follow these steps to safely replace your vacuum bag:

1. Important: Unplug the vacuum cleaner from the electrical outlet before replacing the vacuum bag.
2. Unzip the outer bag of your vacuum cleaner.
3. Carefully remove the used vacuum bag by pulling the green bag collar tab away from the vacuum. Slide the used bag out of the bag holder. The bag holder is designed to automatically seal the bag opening upon removal. Discard the used bag responsibly.
4. To install a new bag, slide the bottom of the new bag's green collar into the bag holder until it audibly "snaps" into place.
5. Push the top of the bag collar inward until the collar "snaps" into place onto the bag holder tab, ensuring a secure fit.
6. Tuck the bag corners neatly into the outer bag, then zip the outer bag closed.

4. Operating Instructions

Once the new bag is securely installed and the outer bag is closed, your Riccar vacuum is ready for use. These HEPA filtration bags are designed to maintain strong suction and filter efficiency throughout their lifespan, providing a cleaner home environment.

5. Maintenance

To maintain optimal performance and filtration efficiency, it is recommended to change your vacuum bag about once a month or when the bag is approximately two-thirds full. Regularly checking the bag's fullness will help prevent loss of suction and ensure effective cleaning.

6. Troubleshooting

If you experience reduced suction or notice dust escaping from your vacuum, check the following:

• Ensure the vacuum bag is not full and has been replaced as recommended.
• Verify that the new bag is correctly installed and securely snapped into place within the bag holder.
• Check that the outer bag is fully zipped and there are no obstructions in the vacuum's hose or brush roll.

For further assistance, please refer to your Riccar vacuum cleaner's main instruction manual or contact Riccar customer support.

7. Specifications

8. Warranty and Support

For information regarding product warranty, returns, or customer support, please visit the official Riccar website or contact their authorized customer service channels. Keep your purchase receipt for any warranty claims.