Philips 562B2

Philips 562B2 Standard 562 13.5V 9.99W User Manual

Model: 562B2

Introduction

This manual provides essential information for the installation, operation, and maintenance of your Philips 562B2 Standard 562 13.5V 9.99W automotive bulb. Please read this manual thoroughly before use to ensure proper function and safety.

The Philips 562B2 is a standard incandescent lamp designed for automotive applications, offering original equipment quality and reliable performance. It operates at 13.5V and consumes 9.99W of power.

Safety Information

Always ensure the vehicle's ignition is off and the battery is disconnected before attempting any installation or maintenance. Automotive bulbs can become very hot during operation; allow them to cool down before handling. Wear appropriate safety gear, such as gloves and eye protection, during installation.

Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product Overview

The Philips 562B2 is a miniature incandescent bulb, commonly used in various automotive lighting applications. Its compact design and standard specifications make it a direct replacement for many original equipment bulbs.

Philips 562B2 Standard Mini-Light packaging — **Figure 1:** Philips 562B2 Standard Mini-Light in its retail packaging.

This image shows the front of the product packaging for the Philips 562B2 bulb. The packaging clearly displays the model number "562 B2", indicates it's an "Incandescent lamp", and highlights "Standard Original equipment quality". The Philips logo is prominently featured at the bottom.

Close-up of Philips 562B2 bulb — **Figure 2:** Close-up view of the Philips 562B2 bulb.
This image provides a detailed view of the Philips 562B2 incandescent bulb itself, showing its clear glass envelope and the filament structure inside. The metal contacts for electrical connection are visible at each end.

Back of Philips 562B2 packaging with specifications — **Figure 3:** Back of Philips 562B2 packaging.
This image displays the rear of the product packaging, detailing specifications such as "13.5 V" and emphasizing "Original equipment quality". It also includes multilingual descriptions and a barcode with the UPC: 046677110062.

Setup and Installation

Installing the Philips 562B2 bulb is typically a straightforward process, but it requires careful attention to detail to ensure proper function and safety. Always refer to your vehicle's owner's manual for specific instructions regarding bulb replacement for your make and model.

Identify the Bulb Location: Determine which bulb needs replacement (e.g., interior light, license plate light, dashboard indicator).
Access the Bulb: Depending on the location, you may need to open a housing, remove a lens cover, or access from behind the dashboard.
Remove the Old Bulb: Gently pull or twist the old bulb from its socket. If the bulb is broken, carefully remove any remaining pieces.
Insert the New Bulb: Align the new Philips 562B2 bulb with the socket and push or twist it firmly into place until it is secure. Avoid touching the glass part of the new bulb with bare hands, as oils can reduce its lifespan. Use a clean cloth or gloves if necessary.
Test the Bulb: Before reassembling, turn on the vehicle's ignition and test the newly installed bulb to ensure it illuminates correctly.
Reassemble: Once confirmed working, reassemble any covers or housings removed during the process.

Note: If you are unsure about the installation process, it is recommended to consult a qualified automotive technician.

Operating Instructions

The Philips 562B2 bulb operates automatically as part of your vehicle's electrical system. Once installed, its operation is controlled by the vehicle's switches and sensors (e.g., turning on headlights, opening a door for interior lights, or activating turn signals).

Ensure your vehicle's electrical system is functioning correctly for optimal bulb performance.
The bulb is designed for 13.5V systems. Using it in systems with significantly different voltages may affect its lifespan or performance.

Maintenance

The Philips 562B2 bulb is a sealed unit and requires no internal maintenance. Its lifespan is determined by operating conditions and hours of use. Regular checks of all vehicle lights are recommended as part of routine vehicle maintenance.

Regular Inspection: Periodically check all exterior and interior lights to ensure they are functioning. Replace any dim or non-functioning bulbs promptly.
Cleaning: If the bulb's housing or lens becomes dirty, clean it with a soft, damp cloth to maintain optimal light output. Do not use abrasive cleaners.
Handling: When replacing bulbs, avoid touching the glass with bare hands. Fingerprints can create hot spots that reduce bulb life.

Troubleshooting

If your Philips 562B2 bulb is not functioning as expected, consider the following common issues and solutions:

Problem	Possible Cause	Solution
Bulb does not light up.	Blown filament. Loose connection in socket. Faulty wiring or fuse. Incorrect voltage supply.	Replace the bulb. Ensure bulb is firmly seated in the socket. Check vehicle's fuse box and wiring. Consult a mechanic if necessary. Verify vehicle's electrical system voltage.
Bulb lights dimly or flickers.	Poor electrical contact. Low voltage from vehicle's system. Corrosion in socket.	Reseat the bulb. Check vehicle's battery and alternator. Clean the socket contacts.
Bulb burns out quickly.	Over-voltage. Excessive vibration. Touching glass with bare hands during installation.	Check vehicle's voltage regulator. Ensure bulb is securely mounted to minimize vibration. Always handle new bulbs by their base or with a clean cloth/gloves.

Specifications

Attribute	Value
Model Number	562B2
Type	Incandescent Lamp
Voltage	13.5 Volts
Wattage	9.99 Watts (implied from 13.5V, 562B2 is a 10W bulb)
Dimensions	3.86 x 2.76 x 0.98 inches (packaging)
Item Weight	0.352 ounces
Manufacturer	Philips
UPC	046677110062
Fit Type	Universal Fit
What's in the Box	Standard Mini Bulb

Warranty and Support

Philips automotive lighting products are manufactured to high quality standards. For specific warranty information and support, please refer to the official Philips Automotive website or contact their customer service directly.

Official Website: www.philips.com/automotive

Manufacturer: Lumileds, LLC

Address: Lumileds, LLC, Farmington Hills, MI 48331-3371

For further assistance, you may also visit the Philips store on Amazon: Philips Store

Related Documents - 562B2

	Philips Ultinon Pro7000 SI LED Festoon Bulb: Enhanced Interior Lighting Discover the Philips Ultinon Pro7000 SI LED festoon bulbs (LUM11860CU70X1/20) for your car. Offering superior brightness (6000 K), uniform light distribution, and a 5,000-hour lifespan, these bulbs enhance driving safety and interior style with easy plug-and-play installation.
	Philips CorePro G24q-3 LED 9.5W Installation Guide Installation guide for the Philips CorePro G24q-3 LED 9.5W (26W equivalent) 4-pin bulb, detailing compatibility, usage, and wiring instructions for electronic ballasts and AC mains.
	Philips Hue Outdoor Lighting Fixture and Smart Bulb Installation Guide Comprehensive guide for installing Philips Hue outdoor lighting fixtures and setting up Philips Hue A19 smart LED bulbs, including safety instructions, setup steps, and Hue system overview. Covers installation, wiring, bulb setup, and smart features.
	Philips Hue Smart Lighting User Manuals: LED Bulb & Dimmer Switch Comprehensive user guide for Philips Hue White & Color Ambiance LED Smart GU10 Bulb and Philips Hue Smart Dimmer Switch with Remote, covering features, specifications, and setup.
	Philips Séria PureProtect 3200 Inteligentná čistička vzduchu - Výkonné a tiché čistenie Objavte Philips Séria PureProtect 3200, inteligentnú čističku vzduchu s pôsobivým výkonom až 520 m³/h CADR, 3-vrstvovou HEPA filtráciou a ultra tichou prevádzkou. Ideálna pre miestnosti do 135 m².
	Philips Ultinon Access LED Headlight Bulb Installation Guide Installation guide for Philips Ultinon Access LED headlight bulbs, providing step-by-step instructions for a secure and proper fit.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.