Moen Iso 18-Inch Single Towel Bar (Model DN0718CH) Instruction Manual

1. Product Overview

The Moen Iso 18-Inch Single Towel Bar, model DN0718CH, offers a sleek and modern design with a highly reflective chrome finish. This accessory is designed to complement various decorating styles and provides a convenient solution for holding hand towels or displaying decorative towels in both bathrooms and kitchens.

• Versatile Design: Chrome finish provides a bright, mirror-like appearance suitable for any decor.
• Functional: Keeps hand towels easily accessible and can also be used for decorative purposes.
• Flexible Placement: Ideal for use in bathrooms or kitchens.
• Easy Installation: Engineered for a straightforward installation process.
• Coordinating Collection: Part of the Moen Iso Collection, allowing for a cohesive look with other bath accessories.
• Durable Construction: Built to last and backed by Moen's Limited Lifetime Warranty.

2. Package Contents

Verify that all components are present before beginning installation:

• Moen Iso 18-Inch Single Towel Bar
• Mounting Hardware (screws, anchors, mounting brackets)
• Installation Instructions (this manual)

3. Tools Required

The following tools are recommended for installation:

• Drill
• Drill Bit (size depends on anchor type, typically 1/4" or 5/16" for drywall anchors)
• Phillips Screwdriver
• Level
• Hammer
• Tape Measure
• Pencil
• Safety Glasses
• Allen Wrench (typically included with hardware)

4. Installation Instructions

Follow these steps to install your Moen Iso 18-Inch Single Towel Bar. Ensure you have all necessary tools and components before starting.

4.1. Preparation

1. Remove Mounting Brackets: Locate the set screw on the accessory post (usually on the underside). Use the provided Allen wrench to loosen the set screw and remove the mounting bracket from the accessory post. Keep the set screw and Allen wrench in a safe place.
2. Identify Bracket Type: Your towel bar will come with one of two mounting bracket designs (stamped steel or zinc). Both are installed similarly.

4.2. Determine Placement

1. Position the Towel Bar: Hold the assembled towel bar against the wall at your desired installation height and location.
2. Use Mounting Template: Secure one side of the paper mounting template (included in your package) to the wall with painter's tape.
3. Level the Template: Use a level to ensure the template is perfectly horizontal. Once level, secure the other side of the template to the wall with tape.

4.3. Mount Brackets to Wall

1. Drill Holes: Using the drill bit size appropriate for your anchors (refer to anchor instructions for specific size, typically 1/4" or 5/16" for drywall), drill holes through the marked points on the template. If your bracket has four holes, drill the two horizontal holes for maximum flexibility.
2. Insert Anchors: Remove the template. Fold the ends of each anchor together and insert them into the drilled holes. Lightly tap the anchors with a hammer until they are flush with the wall surface.
3. Activate Anchors: Insert the red plastic pin (if provided with plastic toggle anchors) into each anchor to activate it, ensuring it expands behind the drywall for a secure fit.
4. Position Brackets: Place each mounting bracket over the installed anchors, ensuring the 'UP' symbol on the bracket faces upwards.
5. Secure Brackets: Thread the provided screws through the mounting brackets and into the anchors. Tighten the screws with a Phillips screwdriver until snug. Do not overtighten.

4.4. Attach Posts

1. Assemble Towel Bar: If not already assembled, connect the towel bar rod to the posts.
2. Place Posts on Brackets: Position the accessory posts onto the mounted brackets, ensuring the set screws on the posts are facing downwards.
3. Tighten Set Screws: Using the provided Allen wrench, tighten the set screws on the underside of each post to secure the towel bar firmly in place.

Your Moen Iso 18-Inch Single Towel Bar is now installed and ready for use.

5. Operating Instructions

The Moen Iso 18-Inch Single Towel Bar is designed for straightforward use. Simply drape your towels over the bar for drying or display. Ensure towels are evenly distributed to maintain balance and prevent excessive strain on the mounting.

6. Maintenance and Care

To maintain the bright, highly reflective chrome finish of your Moen towel bar, follow these care instructions:

• Clean regularly with a soft, damp cloth.
• Avoid using abrasive cleaners, harsh chemicals, or polishes, as these can damage the finish.
• Wipe dry with a soft cloth to prevent water spots and maintain shine.

7. Troubleshooting

If you encounter any issues with your towel bar, consider the following:

• Towel Bar Feels Loose: Check the set screws on the underside of the accessory posts. Tighten them with the Allen wrench until the posts are secure. Do not overtighten.
• Towel Bar is Wobbly: Ensure the mounting brackets are securely fastened to the wall. If installed into drywall, verify that the anchors are properly activated and the screws are tight. If the issue persists, consider reinforcing the mounting area or consulting a professional.

8. Specifications

9. Warranty Information

This Moen product is backed by Moen's Limited Lifetime Warranty. For specific details regarding coverage and terms, please refer to the warranty documentation included with your purchase or visit the official Moen website.

10. Support Information

For further assistance, product information, or to speak with a customer service representative, please contact Moen Consumer Services:

Phone: 1-800-BUY-MOEN

You can also visit the official Moen website for additional resources and product support.