Smittybilt SB44917 Standard Bucket Front Seat Instruction Manual

1. Introduction

The Smittybilt SB44917 Standard Bucket Front Seat is designed to provide ergonomic comfort and durability for your vehicle. Featuring a robust tubular frame and long-lasting trim covers, this seat is engineered to match original equipment (OE) form, fit, and function. Each unit undergoes rigorous testing under various conditions to ensure high quality and reliability.

This manual provides essential information for the proper installation, operation, and maintenance of your Smittybilt Standard Bucket Front Seat.

2. Product Features

• Rugged, deeply contoured seats with firm, comfortable spring suspension.
• Economical solution for replacing worn factory seats.
• Color/Material: Denim Spice.
• Dimensions: Total Height 29.5", Width 19", Seat Depth (front to back) 19".
• Designed to fit 1976-2006 Jeep Wrangler TJ, YJ, and CJ models.

Figure 2.1: The Smittybilt SB44917 Standard Bucket Front Seat, showcasing its denim spice color and contoured design.

3. Installation Instructions

Important Note: Some applications may require specific seat adapter brackets. Please verify compatibility and necessary brackets for your vehicle model year before beginning installation.

• Required Adapter Brackets:
  • For 2003-2006 Jeep Wrangler TJ/YJ: Driver side (P/N 49902), Passenger side (P/N 49903).
  • For 1997-2002 Jeep Wrangler TJ: Driver side (P/N 49900), Passenger side (P/N 49901).
  • For 2003-2006 models, seat modifications may be required.
• Preparation: Ensure you have all necessary tools and hardware. Park your vehicle on a level surface and engage the parking brake. Disconnect the vehicle's battery if working near electrical components.
• Remove Old Seat: Carefully unbolt and remove your existing front seat. Pay attention to any wiring for airbags or seatbelt sensors, if applicable.
• Install Adapter Brackets (if required): Attach the appropriate Smittybilt adapter brackets to the vehicle's floor pan using the provided hardware or existing factory bolts. Ensure they are securely fastened.
• Position New Seat: Place the Smittybilt SB44917 seat onto the adapter brackets or directly onto the factory mounting points if no adapters are needed. Align the bolt holes.
• Secure Seat: Insert and hand-tighten all mounting bolts. Once all bolts are in place, tighten them to the manufacturer's specified torque settings. Do not overtighten.
• Reconnect Components: Reconnect any electrical wiring for seatbelt sensors or other features. Reconnect the vehicle battery.
• Test Functionality: Verify that the seat is securely mounted and does not wobble. Test any adjustable features and ensure seatbelts function correctly.

Figure 3.1: Front view of the Smittybilt SB44917 seat, showing the contoured backrest and seat base.

Figure 3.2: Side view of the Smittybilt SB44917 seat, highlighting the robust construction and denim spice upholstery.

4. Operating the Seat

The Smittybilt SB44917 Standard Bucket Front Seat is designed for fixed mounting or use with compatible seat sliders (sold separately). If equipped with sliders, operate the adjustment lever, typically located at the front or side of the seat base, to move the seat forward or backward. Release the lever to lock the seat into position.

5. Maintenance and Care

• Cleaning: For routine cleaning, use a mild soap and water solution with a soft cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the denim material.
• Spills: Blot spills immediately with a clean, dry cloth. For stubborn stains, a fabric cleaner suitable for automotive upholstery may be used, following the product's instructions.
• Inspection: Periodically inspect all mounting hardware for tightness. Re-tighten any loose bolts to ensure the seat remains securely fastened. Check the seat frame and upholstery for any signs of wear or damage.
• UV Protection: While the denim material is durable, prolonged exposure to direct sunlight can cause fading. Consider using a sunshade when the vehicle is parked for extended periods.

Figure 5.1: Close-up view of the Smittybilt SB44917 seat back, showing the stitching and texture of the denim spice fabric.

6. Troubleshooting

• Seat Does Not Fit: Double-check the vehicle application and ensure you have the correct adapter brackets for your specific Jeep Wrangler model year. Refer to the installation section for bracket part numbers.
• Loose or Wobbly Seat: Ensure all mounting bolts are tightened to the correct torque specifications. If using adapter brackets, verify they are also securely fastened to the vehicle floor.
• Missing Hardware: In rare cases, hardware may be missing. Contact Smittybilt customer support or your retailer for replacement parts. Do not attempt to install the seat with incomplete hardware.
• Bolt Compatibility Issues: Some older Jeep models may have different bolt thread counts or pitches. If factory bolts do not fit, consult a professional or contact Smittybilt for guidance on appropriate replacement hardware.

7. Specifications

Figure 7.1: The Smittybilt SB44917 seat in Denim Spice, alongside swatches for Denim Grey, Denim Black, and Black Vinyl options.

8. Product Overview Video

9. Warranty and Support

Smittybilt products are backed by the Smittybilt Advantage Warranty, one of the strongest warranties available in the off-road market. For specific warranty details, claims, or technical support, please refer to the official Smittybilt website or contact their customer service department.

Contact Information:
Please visit the official Smittybilt website for the most current contact details and support resources.