Progress Lighting P5607-09 Outdoor Wall Lantern Instruction Manual

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P5607-09 Outdoor Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: Progress Lighting P5607-09 Outdoor Wall Lantern. This image displays the complete fixture, featuring a brushed nickel finish, clear flat glass panels, and a single exposed bulb.

Important Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.

• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
• Use UL or ETL listed wire connectors suitable for the size, type, and number of conductors.
• Do not install this fixture in wet locations unless specifically rated for such use. This fixture is rated for outdoor use.
• Ensure the fixture is securely mounted to a structural element.
• Do not exceed the maximum wattage specified for the bulb.
• Always handle glass components with care.

Package Contents

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product.

• Outdoor Wall Lantern Fixture (Model P5607-09)
• Mounting Hardware (screws, wire nuts, mounting plate)
• Installation Sheet
• Clear Flat Glass Panels

Image: Line drawing of the P5607-09 fixture, showing its basic outline and internal components. This diagram helps identify the model number and general structure.

Specifications

Installation & Placement

This fixture is designed for outdoor wall mounting. Refer to the included "Installation Sheet" for detailed step-by-step wiring and mounting instructions. Always ensure power is disconnected at the circuit breaker before beginning any electrical work.

Fixture Sizing and Placement Guidelines

Proper sizing and placement are crucial for optimal aesthetic and functional lighting. Consider the following guidelines:

Entryway Lighting

• Fixture Height: Select fixtures that measure 1/4 to 1/3 of the door's height.
• Mounting Height: Mount the center of the fixture at eye level, approximately 5.5 to 6 feet from the ground.
• Spacing: For double doors or wider entryways, mount lights on either side, 8 to 10 feet apart.

Image: A diagram illustrating how to size wall lanterns for an entryway. It shows a door and a wall lantern, with text indicating that wall lanterns should measure 1/4 the height of the door. An example is provided: a 96-inch door requires a 24-inch fixture height.

Image: An architectural drawing of a house front, demonstrating the recommended placement of two 24-inch tall wall lanterns flanking a 96-inch tall front door. This visually reinforces the 1/4 door height rule for fixture sizing.

Garage Lighting

• Single Car Garage: Use a single wall lantern to illuminate.
• Two or More Car Garages: Mount lights on either side of the garage doors, or across the top of the doors for even illumination.

Image: An architectural drawing of a house with a garage, illustrating the placement of two 24-inch tall wall lanterns flanking a 16-foot wide garage door. The text indicates that for a 16-foot door, a 24-inch height for each fixture is appropriate, following the 0.25 multiplier rule.

Operation

Once properly installed and wired, your P5607-09 Outdoor Wall Lantern operates like any standard outdoor light fixture. It can be controlled by a wall switch, dimmer switch (if using dimmable bulbs), or an external timer/photocell system (not included) connected to the circuit.

• Ensure the correct bulb type and wattage (up to 100W incandescent, medium base) are used.
• For optimal performance and energy efficiency, consider using LED bulbs compatible with outdoor fixtures.

Maintenance

Cleaning

• Always disconnect power before cleaning.
• To clean the fixture, wipe it with a soft, damp cloth.
• Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
• For glass panels, a mild glass cleaner can be used, applied to a cloth first, not directly to the fixture.

Bulb Replacement

• Ensure the power is turned off and the bulb has cooled completely before attempting to replace it.
• Carefully unscrew the old bulb and screw in a new medium base (E26) bulb, not exceeding 100 watts.
• Ensure the glass panels are securely re-installed after bulb replacement.

Troubleshooting

Warranty & Support

This Progress Lighting fixture comes with a 1-year Limited Warranty. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support. For warranty claims or technical assistance, please contact Progress Lighting customer service.

For additional product information or support, visit the Progress Lighting Store.

Additional Resources

Product Showcase