1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Brasscraft SKD0204 D Mixet MTR-5 HH SN Single Handle Tub and Shower Trim Kit. This kit is designed to update the appearance of existing single-handle tub and shower faucet applications that utilize an original, non-pressure balance Mixet valve. It includes ADA compliant handles and features a PVD satin nickel finish for durability and aesthetic appeal. Please read all instructions carefully before beginning installation to ensure proper function and safety.
Figure 1: Components of the Brasscraft SKD0204 D Mixet MTR-5 HH SN Single Handle Tub and Shower Trim Kit. Shown are the escutcheon, volume control handle base, and temperature control handle, all in a satin nickel finish. A small set screw is also visible.
2. Safety Information
- Always turn off the main water supply before attempting any plumbing work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- Ensure all connections are secure to prevent leaks.
- If you are unsure about any step, consult a qualified plumber.
- This trim kit is designed for use with original, non-pressure balance Mixet valves only. Do not attempt to install with other valve types.
3. Package Contents
Verify that all components are present before beginning installation:
- (1) ADA Compliant Volume Control Lever Faucet Handle (PVD Satin Nickel)
- (1) Temperature Control Faucet Lever Handle (PVD Satin Nickel)
- (1) Handle Set Screw
- (1) 5-1/2" OD Escutcheon (Satin Nickel)
- (1) Faucet Stem Retainer Nut
- Note: The Mixet valve itself is not included with this trim kit.
4. Tools Required
The following tools may be required for installation:
- Adjustable Wrench
- Screwdriver (Phillips or Flathead, depending on existing screws)
- Allen Wrench (for set screw, if not included with kit)
- Plumber's Putty or Silicone Sealant (optional, for escutcheon sealing)
- Cleaning Cloth
5. Setup & Installation
Before you begin, ensure the main water supply to the tub/shower is turned off.
- Remove Old Trim: Carefully remove the existing handles, escutcheon, and any other trim components from your Mixet valve. Note the orientation of the existing components for reference.
- Clean Area: Clean the wall surface around the valve thoroughly to ensure a good seal for the new escutcheon.
- Install Retainer Nut: If your existing valve does not have one, install the new faucet stem retainer nut onto the valve body. Hand-tighten, then use an adjustable wrench to gently snug it. Do not overtighten.
- Position Escutcheon: Place the new 5-1/2" OD escutcheon over the valve body and retainer nut. Ensure it sits flush against the wall. You may apply a thin bead of plumber's putty or silicone sealant around the back edge of the escutcheon for a watertight seal, if desired.
- Install Handles:
- Slide the temperature control lever handle onto the appropriate stem of the Mixet valve.
- Slide the ADA compliant volume control lever handle onto the other stem.
- Align the handles correctly for proper operation (e.g., off position, hot/cold indicators).
- Secure each handle using the provided handle set screw. Use an Allen wrench or appropriate screwdriver to tighten the set screw. Do not overtighten.
- Test for Leaks: Turn the main water supply back on slowly. Check all connections and the escutcheon area for any signs of leaks. If leaks are present, turn off the water, re-check connections, and tighten as necessary.
- Functionality Check: Test the operation of both the temperature and volume control handles to ensure smooth movement and proper water flow.
6. Operation
This trim kit is designed for a single-handle Mixet valve, controlling both water temperature and volume.
- Volume Control: The ADA compliant lever handle controls the water flow. Move the handle to increase or decrease the water volume.
- Temperature Control: The temperature control lever handle adjusts the water temperature. Rotate the handle to achieve the desired hot or cold water mix.
- Familiarize yourself with the specific movement of your Mixet valve for optimal control.
7. Maintenance
Proper care will help maintain the finish and functionality of your trim kit.
- Cleaning: Clean the satin nickel finish regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Spot Cleaning: For water spots, use a mild soap solution and a soft cloth, then rinse thoroughly and dry.
- Handle Tightness: Periodically check the handle set screws for tightness. If a handle feels loose, gently tighten the set screw.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leaks from Escutcheon | Improperly sealed escutcheon or loose retainer nut. | Turn off water supply. Ensure retainer nut is snug. Apply plumber's putty or silicone sealant behind escutcheon if not already done. |
| Handles are Loose | Set screws are not tight enough. | Tighten the handle set screws with an Allen wrench or screwdriver. Do not overtighten. |
| Difficulty Adjusting Temperature/Volume | Internal valve issue (not part of trim kit) or incorrect handle installation. | Ensure handles are correctly seated and secured. If the problem persists, the issue may be with the Mixet valve itself, which may require professional service or replacement. |
9. Specifications
- Model Number: SKD0204 D
- Part Number: GID-125026
- Brand: BrassCraft
- Manufacturer: BrassCraft Mfg
- Finish: PVD Satin Nickel
- Color: Nickel
- Handle Material: Brass
- Mounting Type: Wall Mount
- Product Dimensions: 5.5 x 5.5 x 4.25 inches
- Item Weight: 0.01 ounces
- Compatibility: Original, non-pressure balance Mixet valves
10. Warranty and Support
For warranty information or technical support, please contact BrassCraft customer service. Refer to the product packaging or the BrassCraft official website for the most current contact details and warranty terms.
Note: This trim kit is for cosmetic and functional replacement of external components only. Issues related to water pressure, temperature regulation, or leaks from the internal valve mechanism are typically associated with the Mixet valve itself, which is not included with this trim kit.