1. Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries. Keep this manual for future reference.
- WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always disconnect power at the main electrical panel before installing or servicing the fixture.
- This fixture is designed for 12-volt low voltage landscape lighting systems. Do not connect directly to 120V AC power.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electrical Code (NEC).
- This product is UL/CSA listed for wet location use, making it suitable for outdoor installation.
- Use only specified bulb type and wattage.
2. Product Overview
The Kichler 15382BK Accent Light is a low voltage landscape fixture designed for various outdoor lighting effects such as spotlighting, cross-lighting, and grazing. Its durable construction ensures longevity in outdoor environments.
Image 2.1: Kichler 15382BK Accent Light, showcasing its black finish and adjustable head.
Key Features:
- Application: Ideal for spotlighting, cross-lighting, and grazing.
- Construction: Crafted from durable high heat thermoplastic composite resin with a fully sealed, heat-resistant flat glass lens.
- Finish: Black Material (Not Painted).
- Adjustability: Fixture head is adjustable up to 90 degrees for precise light direction.
- Wiring: Includes 30-inch usable 18-2 gauge SPT-1-W lead wire and cable connectors.
- Environmental Rating: Suitable for wet locations.
3. Specifications
| Brand | Kichler |
| Model Number | 15382BK |
| Dimensions (L x W x H) | 6.5 inches x 3 inches x 5 inches |
| Material | High Heat Thermoplastic Composite Resin, Polycarbonate |
| Finish | Black Material (Not Painted) |
| Voltage | 12 Volts (Low Voltage) |
| Light Source Type | MR-16 Halogen Bulb (not included) |
| Max Wattage | 35 Watts (for MR-16 bulb) |
| Socket Type | 12V Incandescent Bi-Pin, High Temperature Porcelain |
| Lead Wire | 30-inch usable 18-2 gauge SPT-1-W |
| Mounting | 8-inch In-ground Stake (included) |
| Environmental Rating | UL/CSA Listed for Wet Locations |
Image 3.1: Dimensional drawing of the Kichler 15382BK Accent Light.
4. Installation
4.1 Pre-Installation
- Turn off power to the landscape lighting system at the main transformer.
- Unpack the fixture and inspect for any damage.
- Ensure you have all necessary tools: wire strippers, screwdriver, and a shovel or trowel for digging.
4.2 Bulb Installation (MR-16)
- Carefully remove the front cover or lens of the fixture.
- Insert one 35-watt maximum MR-16 halogen bulb into the bi-pin socket. Avoid touching the bulb glass with bare hands; use a clean cloth or gloves to prevent oil residue, which can shorten bulb life.
- Securely reattach the front cover or lens.
4.3 Mounting the Fixture
The Kichler 15382BK is designed for in-ground installation using the supplied stake.
- Select a desired location for the accent light.
- Attach the fixture to the top of the 8-inch in-ground stake.
- Push the stake firmly into the ground until the fixture is stable. Ensure the fixture is level and securely positioned.
Image 4.1: Example of the Kichler 15382BK Accent Light installed in a landscape setting.
4.4 Wiring Connections
This fixture uses low voltage wiring. Connect to a 12-volt landscape lighting transformer (sold separately).
- Lay out the 18-2 gauge SPT-1-W lead wire from the fixture to the main low voltage cable.
- Using the supplied cable connectors, securely attach the fixture's lead wires to the main low voltage cable. Ensure a tight, waterproof connection.
- Bury the low voltage cable and fixture lead wire a few inches underground to protect them from damage.
5. Operation
Once installed and connected to a 12-volt landscape lighting system, the Kichler 15382BK Accent Light operates in conjunction with your system's transformer and timer settings.
- Power On/Off: The light will turn on and off according to the schedule set on your landscape lighting transformer or manual switch.
- Adjusting Light Direction: The fixture head can be manually adjusted up to 90 degrees to direct light precisely where needed for spotlighting or grazing effects. Loosen the adjustment screw, position the head, and then tighten the screw to secure.
6. Maintenance
Regular maintenance will help ensure the longevity and optimal performance of your accent light.
- Cleaning: Periodically clean the fixture and lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or lens.
- Bulb Replacement: If the bulb burns out, ensure power is disconnected before replacing. Allow the fixture to cool completely. Follow the bulb installation steps (Section 4.2) to replace with a new 35-watt maximum MR-16 halogen bulb.
- Inspection: Annually inspect wiring and connections for any signs of wear, damage, or corrosion. Ensure all connections remain secure.
7. Troubleshooting
If your Kichler 15382BK Accent Light is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the system. Faulty bulb. Loose wire connection. | Check transformer power and timer settings. Replace bulb. Inspect and secure all wire connections. |
| Light is dim or flickering. | Low voltage from transformer. Loose wire connection. Incorrect bulb wattage. | Check transformer output and total wattage load. Inspect and secure all wire connections. Ensure correct 35-watt MR-16 bulb is used. |
| Water inside fixture. | Improperly sealed lens/cover. | Ensure lens and cover are securely fastened and seals are intact. |
8. Warranty & Support
8.1 Warranty Information
Kichler Lighting warrants that landscape lighting products with model numbers beginning with "15" will be free from defects in material and workmanship for one (1) year from the date of purchase by the original purchaser. Specific exceptions apply:
- Low voltage outdoor products (Design Pro LED) for single-family residences: fifteen (15) years or 40,000 hours (whichever comes first) on the light engine and all other electrical components. For commercial use: ten (10) years or 40,000 hours.
- Low voltage landscape lighting fixture brass, copper, and stainless steel housings and their exterior finishes: fifteen (15) years. Natural patination of brass or copper is not considered a defect.
- Low voltage landscape lighting aluminum housings and their exterior finishes: five (5) years.
- HID ballasts: two (2) years.
- Bulbs carry no warranty.
- Painted transformers: limited 10 years.
- Stainless steel transformers: limited lifetime of original purchaser warranty.
To replace a product with a warranted defect, the original purchaser must send the allegedly defective parts or products F.O.B. destination to the plant designated by Kichler Lighting, along with proof of purchase, original purchaser's name, return address, and a description of the claimed product defect.
8.2 Customer Support
For further assistance, technical support, or warranty claims, please contact Kichler Lighting customer service. Refer to the official Kichler website or product packaging for current contact information.