Introduction
Thank you for choosing the Novus B 2200 Heavy Duty Hole Punch. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new perforator. Please read this manual thoroughly before first use and keep it for future reference.
Figure 1: The Novus B 2200 Heavy Duty Hole Punch in its upright position, ready for use.
Safety Information
Your safety is paramount. Please observe the following safety guidelines:
- Always keep hands and fingers clear of the punching mechanism during operation to prevent injury.
- Ensure the swivel guard is properly positioned to maximize user safety.
- Do not attempt to punch materials other than paper.
- Keep the device out of reach of children.
- The device bears the GS approval for product safety, indicating compliance with German safety standards.
Figure 2: The GS (Geprüfte Sicherheit) mark, indicating certified product safety.
Package Contents
Upon opening the package, please verify that all components are present:
- 1 x Novus B 2200 Light Grey Block Punch - Heavy Duty Hole Punch
- 2 x Replacement Discs
- 2 x Cutting Dies
- User Manual (this document)
Setup
- Unpacking: Carefully remove the Novus B 2200 from its packaging.
- Placement: Place the hole punch on a stable, flat surface.
- Adjusting Paper Guides: The device features two movable positioning guides. Adjust these guides to the desired paper size (A6 to A4) to ensure centered and file-flush punching. For A4/A5 paper, use the locking mechanism for precise alignment.
Figure 3: Adjusting the movable paper guides for precise paper alignment.
Operating Instructions
Follow these steps to operate your Novus B 2200 Heavy Duty Hole Punch:
- Prepare Paper: Gather the sheets of paper you wish to punch. The Novus B 2200 can perforate up to 200 sheets of 80gsm standard paper simultaneously.
- Insert Paper: Carefully insert the paper stack into the punching slot, ensuring it is flush against the adjustable paper guides.
- Align Paper: Use the movable positioning guides to align the paper for 2-hole (80mm standard) or 4-hole (80x80x80mm) punching. The A4/A5 locking mechanism assists in precise alignment for these standard sizes.
- Punch: Firmly press down the lever handle. The unique leverage mechanism is designed to make punching up to 200 sheets effortless.
- Remove Paper: Once punched, release the lever and carefully remove the perforated paper.
Figure 4: A user demonstrating the punching action with a stack of paper.
Figure 5: Overhead view showing paper correctly positioned for punching.
Figure 6: Example of punched paper neatly filed in a binder.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Novus B 2200.
Replacing Wear Parts (Discs and Cutting Dies)
The Novus B 2200 is designed for easy replacement of wear parts without the need for tools.
- Access: The casing is easily removable. Gently open or remove the casing to access the punching mechanism.
- Remove Old Parts: Carefully remove the worn-out discs and cutting dies.
- Install New Parts: Insert the new replacement discs and cutting dies (two of each are included in delivery). Ensure they are seated correctly.
- Close Casing: Reattach the casing securely.
Replacement wear parts are readily available for purchase.
Figure 7: Detailed view of the punching mechanism, showing the discs and cutting dies.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Incomplete or ragged holes | Worn cutting dies or discs. | Replace the cutting dies and discs as described in the Maintenance section. |
| Difficulty pressing the lever | Too many sheets inserted, or paper is too thick. | Reduce the number of sheets to within the 200-sheet capacity (80gsm). Ensure paper type is standard office paper. |
| Paper not aligned correctly | Paper guides not properly set. | Adjust the movable positioning guides to firmly hold the paper in place. Use the A4/A5 locking mechanism for standard sizes. |
Specifications
- Model: Novus B 2200
- Capacity: Up to 200 sheets (80 gsm paper)
- Punch Distance: 80 mm (standard 2-hole), 80x80x80 mm (4-hole)
- Hole Diameter: 6 mm
- Adjustable Paper Sizes: A6 to A4
- Operation Mode: Manual
- Material: Paper (referring to the material it punches, the device itself is metal/plastic)
- Color: Light Grey
- Product Dimensions: 15.75"L x 7.36"W x 8.86"H
- Item Weight: Approximately 3.53 ounces (100 Grams)
- Manufacturer: Schneider Novus
Figure 8: Visual representation of key product specifications and features.
Warranty and Support
The Novus B 2200 Heavy Duty Hole Punch comes with a 10-year manufacturer's guarantee, ensuring long-term reliability and peace of mind.
For technical support, warranty claims, or to purchase replacement parts, please contact Novus customer service through their official website or authorized distributors. Refer to the contact information provided with your purchase documentation.
You can also visit the official Novus store for more information: Novus Store on Amazon
Figure 9: The official Novus brand logo.
