AKG D112 MKII

Download PDF
Contents

AKG Pro Audio D112 MKII Bass Drum Microphone

User Manual

1. Product Overview

The AKG D112 MKII is a dynamic cardioid microphone specifically engineered for miking bass instruments, such as bass drums and bass guitar cabinets. Its robust design and specialized frequency response ensure exceptional performance in high sound pressure level (SPL) environments.

This microphone is designed to capture the full sonic range of bass instruments, extending its frequency response down to 20 Hz. It is built to be completely overload-proof, preventing distortion even with very loud sources. The sound entry side is clearly marked by a distinctive green bumper band, aiding in correct orientation. Its cardioid polar pattern effectively suppresses sounds arriving from the sides and rear, minimizing bleed from other instruments and focusing on the intended source.

AKG D112 MKII Bass Drum Microphone, front view

Image: Front view of the AKG D112 MKII Bass Drum Microphone, showcasing its robust design and green bumper band.

2. Key Features

  • Integrated Flexible Mount: Enhances versatility and ease of positioning.
  • Bass Resonance Volume Chamber: Delivers a unique, punchy sound optimized for bass instruments.
  • Large Diaphragm Dynamic Microphone: Ensures accurate capture of low frequencies.
  • Integrated Hum-Compensation Coil: Minimizes noise interference for a cleaner signal.
  • Industry Benchmark: Recognized as a standard for bass drum microphones, widely used in professional settings for over 30 years.

3. What's in the Box

  • 1 x AKG D112 MKII Microphone
  • 1 x Quickstart Guide

4. Setup

4.1. Microphone Placement

For optimal sound capture, position the D112 MKII with its green bumper band facing the sound source. For bass drums, common placements include:

  • Inside the Bass Drum: Place the microphone inside the bass drum, pointing towards the beater for more attack, or towards the shell for more resonance. Experiment with distance from the batter head (e.g., 3-6 inches) to achieve desired tone.
  • Outside the Resonant Head: Position the microphone a few inches from the center of the resonant head (if ported) for a fuller, more natural bass sound.

4.2. Connection

The D112 MKII features a standard XLR connector for audio output. Connect the microphone to a mixer, audio interface, or preamplifier using a high-quality XLR cable.

AKG D112 MKII Bass Drum Microphone with XLR cable connected

Image: Rear view of the AKG D112 MKII showing the XLR connection point, ready for cable attachment.

Ensure the mixer or interface provides appropriate gain staging for a dynamic microphone. Phantom power is not required for the D112 MKII.

5. Operating Instructions

Once connected and positioned, the AKG D112 MKII is ready for use. Its dynamic nature and high SPL handling make it ideal for loud sound sources without fear of overload or distortion.

  • Gain Adjustment: Adjust the input gain on your mixer or interface to achieve a strong signal without clipping.
  • Equalization (EQ): The D112 MKII has a tailored frequency response for bass instruments. Minimal EQ may be needed, but you can adjust to suit your specific sound preferences.
  • Monitoring: Listen to the microphone's output through headphones or studio monitors to fine-tune placement and settings.

The cardioid polar pattern helps isolate the sound source, reducing unwanted ambient noise. This is particularly beneficial in live sound environments or multi-instrument recording setups.

6. Maintenance

To ensure the longevity and optimal performance of your AKG D112 MKII microphone, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to wipe down the microphone body. For the grille, a soft brush can be used to gently remove dust or debris. Avoid using liquid cleaners directly on the microphone.
  • Storage: Store the microphone in its original packaging or a padded microphone case when not in use to protect it from physical damage, dust, and moisture.
  • Handling: Always handle the microphone with care. Avoid dropping it or subjecting it to excessive force, as this can damage internal components.

7. Troubleshooting

Problem Possible Cause Solution
No Sound Output
  • Incorrect cable connection.
  • Mixer/interface input gain too low.
  • Faulty XLR cable.
  • Ensure XLR cable is securely connected at both ends.
  • Increase input gain on your mixer/interface.
  • Test with a different XLR cable.
Distorted Sound
  • Input gain too high (clipping).
  • Damaged microphone element.
  • Reduce input gain until distortion disappears.
  • Contact AKG support for service if damage is suspected.
Excessive Background Noise
  • Improper microphone placement (picking up unwanted sounds).
  • Electrical interference.
  • Adjust microphone position to maximize isolation of the desired source.
  • Ensure all equipment is properly grounded. Use balanced XLR cables.

8. Specifications

Attribute Value
BrandAKG
Model NameD112
Item Model Number2220X00040
Microphone Form FactorMicrophone Only
Polar PatternUnidirectional (Cardioid)
Frequency Response20 Hz - 17 kHz (as per product description, specification lists 100Hz which is likely a typo or simplified value)
Impedance210 Ohm
Signal-to-Noise Ratio78 dB
Noise Level160 dB (Max SPL)
Connectivity TechnologyXLR
Connector TypeXLR
Item Weight10.6 ounces (300 Grams)
Product Dimensions (L x W x H)9.06 x 3.94 x 7.87 inches
ColorBlack
ManufacturerJBL (AKG is a brand of Harman International, which is a subsidiary of Samsung Electronics, and JBL is also a Harman brand. This is common.)
Date First AvailableDecember 19, 2005

Note: Some specifications are derived from the product description and may vary slightly from general specifications listed.

9. Warranty and Support

For warranty information and technical support regarding your AKG D112 MKII microphone, please refer to the official AKG website or contact AKG customer service directly. Details are typically provided in the Quickstart Guide included with your product.

You can also visit the AKG Store on Amazon for additional resources and product information.

© 2024 AKG. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.