Introduction
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Oster Classic Series 16-Speed Blender with Food Chopper. Please read this manual thoroughly before first use and retain it for future reference.
Setup
Unpacking
Carefully remove all components from the packaging. Ensure all parts listed in the 'Package Contents' section are present. Dispose of all packaging materials responsibly.
Component Identification
- Blender Base: Contains the motor and control panel.
- 6-Cup Boroclass Glass Jar: Main blending container.
- Lid with Filler Cap: Seals the glass jar during operation and allows for ingredient addition.
- Blade Assembly: Stainless steel Crush Pro 4® blade for blending.
- Food Chopper Attachment: 3-cup BPA-free jar with stainless steel S-blade for chopping.
Figure 1: Main components of the Oster Classic Series 16-Speed Blender, including the blender base, glass jar, and food chopper attachment.
Assembly
- Place the blender base on a clean, dry, and stable surface.
- Ensure the blade assembly is securely attached to the bottom of the glass jar.
- Place the glass jar onto the blender base, ensuring it is seated correctly.
- Place the lid onto the glass jar and secure it. Insert the filler cap into the lid opening.
- For the food chopper, attach the S-blade to the center post of the 3-cup jar. Place the lid on the chopper jar and then place the assembled chopper onto the blender base.
Operating Instructions
General Blending
- Ensure the blender is unplugged before adding ingredients.
- Add ingredients to the 6-cup glass jar. Do not overfill beyond the maximum fill line.
- Securely place the lid with the filler cap on the jar.
- Plug the blender into a 120V AC electrical outlet.
- Select the desired speed setting (Low, Medium, High) or a pre-programmed function (Smoothie, Food Chop, Pulse).
- For continuous blending, select a speed. For intermittent blending, use the Pulse function.
- To stop, press the 'Off' button or turn the dial to 'Off'.
Figure 2: The control panel of the blender, showing various speed and function buttons.
Using the Food Chopper
- Ensure the blender is unplugged.
- Assemble the food chopper attachment as described in the 'Assembly' section.
- Add ingredients to the 3-cup food chopper jar. Do not overfill.
- Securely place the lid on the chopper jar.
- Place the assembled chopper onto the blender base.
- Plug the blender into a 120V AC electrical outlet.
- Use the 'Food Chop' pre-programmed button or the 'Pulse' function for best results.
- To stop, press the 'Off' button.
Figure 3: The food chopper attachment in use, demonstrating its function for processing ingredients.
Tips for Optimal Performance
- Always add liquids first when blending.
- Cut solid ingredients into small pieces (approx. 1-inch) before adding to the jar.
- Do not blend hot liquids in the food chopper.
- For thick mixtures, use the Pulse function to prevent motor strain.
Maintenance
Cleaning
- Always unplug the blender before cleaning.
- Separate the glass jar, blade assembly, and lid.
- The 6-cup Boroclass glass jar and lid are dishwasher safe. The blade assembly can be hand-washed with warm, soapy water.
- The food chopper jar and S-blade are also dishwasher safe.
- Wipe the blender base with a damp cloth. Do not immerse the base in water.
- Ensure all parts are completely dry before reassembling or storing.
Storage
Store the blender and its attachments in a dry, safe place when not in use. Ensure the power cord is neatly wrapped and not kinked.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on. | Not plugged in; power outage; jar not correctly seated. | Check power connection; verify power supply; ensure jar is securely placed on the base. |
| Ingredients are not blending smoothly. | Too little liquid; ingredients too large; jar overfilled. | Add more liquid; cut ingredients into smaller pieces; reduce quantity of ingredients. Use Pulse function. |
| Loud noise or motor straining. | Overloaded; hard ingredients; improper assembly. | Reduce load; add more liquid; check blade assembly and jar seating. |
| Leakage from the bottom of the jar. | Blade assembly not tightened; seal damaged. | Ensure blade assembly is tightly screwed onto the jar. Inspect the rubber gasket for wear and replace if necessary. |
Specifications
- Brand: Oster
- Model: 6878000N01
- Power: 700 Watts
- Speeds: 16 (including Pulse and pre-programmed settings)
- Blender Jar Capacity: 6-Cup (Boroclass Glass)
- Food Chopper Capacity: 3-Cup (BPA-free plastic)
- Blade Material: Stainless Steel (Crush Pro 4®)
- Drive System: DURALAST™ All Metal Drive
- Product Dimensions: 9.25"D x 14"W x 13.7"H
- Item Weight: 9.02 pounds
- Voltage: 120V
Warranty and Support
The Oster Classic Series 16-Speed Blender comes with a 10-Year DURALAST™ All Metal Drive Limited Warranty for lasting durability and a 3-Year Satisfaction Guarantee. For warranty claims, technical support, or replacement parts, please visit the official Oster Store or contact customer service.
Product Videos
Oster Classic Blender Review
This video provides an overview of the Oster Classic Blender, highlighting its features and performance. It demonstrates the blender's capabilities for various tasks and discusses its durability.
Blender Features and Usage
A detailed look at the blender's control panel, speed settings, and the glass jar. The video emphasizes the ease of use and the quality of the glass container.
Milkshake Blending Demonstration
This video demonstrates the blender's "Milkshake" button, showcasing its effectiveness in creating smooth milkshakes with ice cream and milk.
