Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Hampton Bay Thermostatic Ceiling Fan and Light Remote Control kit, model 838-956. This kit is designed to convert any standard ceiling fan into a remote-controllable unit, allowing for independent control of fan speed and lighting functions. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Product Features
- Independent Control: Separately controls ceiling fan speed and light.
- Fan Speed Settings: Displays HI, MED, LOW, and OFF modes for fan speed control.
- Light Dimming Function: Allows adjustment of light intensity.
- Thermostatic Control: A dedicated button on the transmitter automatically adjusts fan speed based on ambient temperature.
- Timer Functions: Includes separate timer buttons for both fan and light operation.
- UL Listed: Ensures compliance with safety standards.
Setup and Installation
This kit includes a remote transmitter and a receiver unit. The receiver unit must be installed within the ceiling fan canopy, and the remote transmitter requires 4 AAA-size batteries (not included). Professional installation is recommended for electrical components. Ensure power is disconnected at the circuit breaker before beginning installation.
Installation Steps:
- Power Disconnection: Turn off power to the ceiling fan at the main circuit breaker.
- Access Fan Canopy: Remove the ceiling fan canopy to access the wiring.
- Receiver Wiring: Connect the receiver unit's wires to the corresponding fan and household wires as per the wiring diagram provided with your product. Ensure all connections are secure.
- Receiver Placement: Carefully place the receiver unit inside the fan canopy. Ensure it does not interfere with fan operation or wiring.
- Canopy Reinstallation: Reattach the fan canopy.
- Battery Installation: Open the battery compartment on the remote transmitter and insert 4 AAA batteries, observing polarity.
- Power Restoration: Restore power at the circuit breaker.
- Code Setting (if applicable): If your remote and receiver have dip switches for code setting, ensure they match. Refer to the specific instructions included with your product for details on setting these codes.
Image: The Hampton Bay Thermostatic Ceiling Fan and Light Remote Control kit, featuring the handheld remote and the receiver unit. This kit enables remote operation of your ceiling fan and light.
Operating Instructions
The remote control allows for convenient operation of your ceiling fan and light from anywhere in the room.
- Power Button: Press the Power button to turn the fan and light ON or OFF.
- Fan Speed Control: Use the HI, MED, LOW buttons to adjust fan speed. Press OFF to turn the fan off. The remote's screen displays the current fan speed setting.
- Light Control: Press the Light button to turn the light ON or OFF. Hold the Light button to dim or brighten the light.
- Thermostatic Function: Press the Thermostatic button (if available on your model) to activate automatic fan speed adjustment based on room temperature.
- Timer Functions: Use the dedicated Fan Timer and Light Timer buttons to set a specific duration for the fan or light to operate before automatically turning off.
Maintenance
- Battery Replacement: Replace the 4 AAA batteries in the remote transmitter when the indicator light dims or the remote's range decreases. Always use fresh batteries and dispose of old batteries responsibly.
- Cleaning: Wipe the remote control and receiver unit with a soft, dry cloth. Do not use abrasive cleaners or allow moisture to enter the unit.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan/Light does not respond to remote. | Dead batteries in remote, incorrect dip switch settings, power off at wall switch/breaker. | Replace batteries. Verify dip switch settings match between remote and receiver. Ensure power is ON at wall switch and circuit breaker. |
| Light flickers or does not turn on/off correctly. | Incompatible light bulb, loose wiring, receiver malfunction. | Ensure compatible dimmable bulbs are used if dimming function is desired. Check all wiring connections. If issues persist, consult a qualified electrician. |
| Remote display shows incorrect fan/light status. | Fan/light was turned off via a wall switch after remote setting. | The remote may not synchronize if the fan's power is interrupted by a wall switch. Use the remote for all operations to maintain accurate status display. |
| Poor remote reception. | Antenna wire obstruction or insufficient length. | Ensure the receiver's antenna wire is not obstructed and is extended for optimal reception. |
Specifications
- Manufacturer: Hampton Bay
- Model Number: 838-956
- Item Weight: 7 ounces
- Product Dimensions: 2 x 1 x 3.8 inches
- Batteries Required: 4 AAA (for transmitter, not included)
- Power Source: Battery Powered (remote), 110 Volts (receiver)
- Mounting Type: Ceiling Mount (receiver)
- Certification: UL Listed
- Usage: Indoor use only
- Included Components: Remote Transmitter, Receiver Unit
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Hampton Bay website. Keep your purchase receipt for warranty claims.
