Classic Accessories Over Drive PolyPRO 3 Camper Cover User Manual

Overview

The Classic Accessories Over Drive PolyPRO 3 Camper Cover provides robust, all-season protection for your camper. Constructed with durable PolyPRO3™ fabric, it shields your RV from rain, snow, dirt, and scratches. This cover features adjustable tension panels, elasticized hem corners for a custom-like fit, and air vents to reduce wind stress and internal moisture. Zippered panels offer convenient access to RV doors and engine areas. The design ensures comprehensive protection and ease of use.

Key Features:

• Fits campers 8' - 10' long.
• Thick triple-ply top defends against rain, snow, dirt, and scratches.
• Adjustable tension panels and elasticized hem corners for a secure fit.
• Air vents reduce wind stress and inside moisture.
• Zippered panels allow access to RV doors and engine areas.
• Integrated straps and toss bag system for quick installation.
• Durable fabric provides protection from harmful UV rays.

Setup Instructions

Proper installation of your camper cover is crucial for maximum protection and longevity. Follow these steps for a secure fit:

1. Prepare Your Camper: Ensure your camper is clean and dry before covering. Remove any sharp objects or protrusions that could snag or tear the cover. Consider padding sharp edges with foam or cloth.
2. Unpack the Cover: Lay the cover out on a flat surface near your camper. Identify the front and rear of the cover. The top section is typically lighter in color (white/snow white) and made of triple-ply PolyPRO3 fabric for enhanced roof protection.
3. Drape Over Camper: Carefully pull the cover over the top of your camper, starting from the front. It is recommended to have at least two people for this step to prevent dragging the cover on the ground or snagging it.
4. Adjust for Fit: Once draped, pull the cover down evenly on all sides. The elasticized hem corners will help secure the fit around the bottom edges.
5. Secure Straps: Utilize the integrated undercarriage strap system. Toss the straps under the camper and connect them to the corresponding buckles on the opposite side. Tighten the straps to ensure a snug fit, but do not overtighten.
6. Utilize Tension Panels: Adjust the tension panels located on the sides and ends of the cover. These panels help eliminate excess fabric and provide a custom-like fit, reducing wind flapping.
7. Check Air Vents: Ensure the air vents are not obstructed. These vents are designed to reduce wind stress and allow moisture to escape, preventing mold and mildew buildup.

Installation Video:

Operating Instructions

The PolyPRO 3 Camper Cover is designed for ease of use while providing maximum protection.

• Accessing Your Camper: The cover features zippered panels that allow convenient access to your RV doors and engine areas without needing to remove the entire cover. Locate the zippers and carefully open them to access the desired section.
• Adjusting for Weather: In windy conditions, regularly check the tension of the straps and panels. Re-tighten as necessary to maintain a snug fit and prevent excessive flapping, which can cause wear and tear.
• Monitoring Ventilation: The integrated air vents are crucial for preventing moisture buildup. Periodically check that these vents are clear of debris and functioning correctly.

Maintenance

Regular maintenance will extend the life of your camper cover and ensure continued protection.

• Cleaning: Clean the cover periodically with mild soap and water. Use a soft brush or sponge to gently scrub away dirt and grime. Rinse thoroughly with clean water and allow it to air dry completely before folding or storing. Do not use harsh chemicals or abrasive cleaners.
• Inspection: Regularly inspect the cover for any signs of wear, tears, or damage. Promptly repair any small tears with a suitable repair kit to prevent them from enlarging.
• Storage: When not in use, fold the cover neatly and store it in the included stuff sack in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the cover is completely dry before storage to prevent mold and mildew.

Troubleshooting

Here are solutions to common issues you might encounter:

• Cover flapping excessively in wind: Ensure all straps are securely fastened and tightened. Adjust the tension panels to remove any slack in the fabric. Consider adding additional tie-downs in extremely windy conditions if necessary.
• Moisture buildup under the cover: Verify that the air vents are clear and unobstructed. Ensure the camper was completely dry before covering. If the issue persists, temporarily remove the cover on dry, sunny days to allow for airing out.
• Tears or abrasions: Small tears can often be repaired using a fabric repair kit designed for outdoor materials. For larger damage, contact customer support for warranty information or replacement options.
• Difficulty installing the cover: Ensure the cover is correctly oriented (front to back). It is always easier to install with two people. If the cover feels too tight, double-check the dimensions of your camper against the cover's specifications.

Specifications

Warranty Information

The Classic Accessories Over Drive PolyPRO 3 Camper Cover includes a 3-year warranty. This warranty covers problems with workmanship or materials within the specified period. For detailed information on the warranty program and how to file a claim, please refer to the official Classic Accessories website or contact their customer support.

Customer Support

For further assistance, questions, or to report any issues with your product, please contact Classic Accessories customer support. You can find contact information and additional resources on the official Classic Accessories website.

Visit the Classic Accessories Store for more products and information.