Coaster Fine Furniture 1137

Coaster Home Furnishings Eden Contemporary Twin Size Pop-Up Trundle (Model 1137) Instruction Manual

Your Guide to Safe Setup, Operation, and Maintenance

1. Introduction

Thank you for choosing the Coaster Home Furnishings Eden Contemporary Twin Size Pop-Up Trundle. This versatile trundle is designed to provide additional sleeping space, easily rolling out and popping up to match the height of a standard bed. Its durable metal frame and supportive grid design ensure stability and long-lasting use. Please read this manual thoroughly before assembly and use to ensure safe operation and proper maintenance.

2. Safety Information

Your safety is paramount. Please observe the following precautions:

  • Adult Operation Only: The pop-up mechanism is spring-loaded and requires careful handling. Only adults should operate the trundle's lifting and lowering functions.
  • Clear Surroundings: Ensure the area around the trundle is clear of obstructions, children, and pets before operating the pop-up mechanism to prevent injury.
  • Secure the Safety Pin: Always engage the safety pin on the side of the trundle once it is in the fully raised position to prevent accidental lowering.
  • Mattress Weight Limit: The trundle is designed to lift mattresses up to approximately 35 lbs (15.8 kg). Exceeding this weight may make operation difficult or damage the mechanism.
  • Stable Placement: Ensure the trundle is placed on a flat, stable surface. If used with a bed frame, secure it to prevent rolling away if not intended.
  • No Jumping: Do not jump on the trundle bed. This can damage the frame and mechanism.
  • Regular Inspection: Periodically check all bolts, screws, and the pop-up mechanism for tightness and proper function. Tighten as needed.

3. Product Overview

The Coaster Home Furnishings Eden Contemporary Twin Size Pop-Up Trundle is a versatile and space-saving solution for extra sleeping arrangements. It features a sturdy metal construction with a grid design for mattress support and smooth-rolling casters for easy maneuverability.

Coaster Home Furnishings Eden Contemporary Twin Size Pop-Up Trundle

Figure 1: The Coaster Home Furnishings Eden Contemporary Twin Size Pop-Up Trundle in its raised position. This image shows the full metal frame and grid support structure.

Dimensions of Coaster Home Furnishings Eden Contemporary Twin Size Pop-Up Trundle

Figure 2: Detailed dimensions of the trundle, indicating a length of 70.25 inches, width of 38.5 inches, and a height of 16.75 inches when raised. The collapsed height is approximately 6 inches. These measurements are crucial for ensuring compatibility with existing bed frames and mattresses.

4. Setup and Assembly

Assembly is required for this product. Detailed assembly instructions are typically included within the product packaging. Please follow these instructions carefully, ensuring all components are correctly installed and tightened before use.

4.1 Initial Unpacking and Inspection

  • Carefully remove all components from the packaging.
  • Inspect all parts for any damage or missing pieces. Contact customer support immediately if any issues are found.
  • Be aware that the trundle frame may be secured with metal ties for shipping. Exercise caution when cutting these ties, as the spring mechanism may cause the frame to expand rapidly.

4.2 Assembly Steps

Refer to the separate assembly guide provided in your product packaging for step-by-step instructions. Ensure all bolts and fasteners are securely tightened. Do not overtighten.

5. Operating Instructions

The Coaster Pop-Up Trundle is designed for easy conversion from a stored position to a raised bed. Always ensure the area is clear before operating.

5.1 Raising the Trundle

  1. Ensure the trundle is rolled out from under the main bed and positioned in an open area.
  2. Locate the lifting mechanism, typically a handle or lever, on the side of the trundle frame.
  3. Firmly grasp the handle/lever and carefully lift the trundle frame upwards. The spring mechanism will assist in the lifting process.
  4. Continue lifting until the trundle locks into its fully raised position. You should hear a click, indicating it is secure.
  5. Important: Once raised, insert the provided safety pin into the designated hole on the side of the frame to prevent accidental collapse.

5.2 Lowering the Trundle

  1. Remove the safety pin from the trundle frame.
  2. Locate the release mechanism (often the same handle/lever used for lifting).
  3. Grasp the handle/lever and carefully press down to disengage the lock.
  4. Slowly guide the trundle frame downwards until it is fully collapsed.
  5. Once lowered, the trundle can be rolled back under the main bed for storage.

6. Maintenance and Care

Proper care will extend the life and appearance of your trundle.

  • Cleaning: Clean the metal frame using a damp cloth. Do not use strong chemicals, abrasive cleaners, or polishes, as these can damage the finish.
  • Regular Checks: Periodically inspect all hardware (bolts, screws) and the pop-up mechanism for any signs of loosening or wear. Tighten loose hardware immediately.
  • Lubrication: If the pop-up mechanism becomes stiff, a small amount of silicone-based lubricant can be applied to the moving parts. Avoid oil-based lubricants that can attract dust.
  • Storage: When not in use, store the trundle in its lowered position to protect the mechanism and save space.

7. Troubleshooting

If you encounter issues with your trundle, refer to the following common solutions:

  • Trundle is difficult to lift:
    • Check the weight of the mattress. Ensure it does not exceed the recommended 35 lbs (15.8 kg).
    • Ensure the mechanism is not obstructed.
    • Apply lubricant to the moving parts of the pop-up mechanism.
  • Trundle does not stay in the raised position:
    • Verify that the safety pin is correctly inserted and engaged.
    • Inspect the locking mechanism for any damage or wear.
  • Trundle wheels are not rolling smoothly:
    • Check for debris or hair caught in the wheels.
    • Ensure the wheels are securely attached and not damaged.

If problems persist, please contact Coaster Fine Furniture customer support.

8. Specifications

FeatureDetail
BrandCoaster Fine Furniture
Model Number1137
SizeTwin
Product Dimensions (L x W x H)70.25" x 38.5" x 6" (collapsed) / 16.75" (raised)
Special FeatureRolling Casters, Pop-Up Mechanism
ColorBlack
Finish TypeBlack
Included ComponentsPop Up Trundle
Compatible Mattress SizeTwin
MaterialMetal
Item Weight55 pounds
Assembly RequiredYes
UPC021032010089

9. Warranty and Support

For warranty information, please refer to the documentation included with your product or visit the official Coaster Fine Furniture website. For customer support, including assistance with assembly, parts, or troubleshooting, please contact Coaster Fine Furniture directly through their official channels.

Manufacturer: Coaster Fine Furniture

Website: Coaster Fine Furniture Store on Amazon

Related Documents - 1137

Preview Coaster Fine Furniture 460361BLK Twin/Twin Bunk Bed Assembly Instructions
Detailed assembly instructions for the Coaster Fine Furniture 460361BLK Twin/Twin Bunk Bed, including parts identification, hardware list, assembly steps, safety warnings, and mattress size recommendations.
Preview Coaster Fine Furniture 460361WHT Twin Twin Bunk Bed Assembly Instructions
Comprehensive assembly guide for the Coaster Fine Furniture 460361WHT Twin Twin Bunk Bed. Includes detailed steps, parts and hardware identification, safety warnings, mattress size recommendations, and dimensions.
Preview Coaster Fine Furniture 305706 Day Bed Assembly Instructions and Parts Guide
Comprehensive assembly instructions for the Coaster Fine Furniture 305706 Day Bed. Includes detailed parts identification, hardware list, step-by-step assembly guide, and product dimensions for easy setup.
Preview Coaster Fine Furniture 2256W Twin/Twin Bunk Bed Assembly Instructions
Detailed assembly instructions for the Coaster Fine Furniture 2256W Twin/Twin Bunk Bed, including parts identification, hardware list, safety warnings, and product dimensions. Ensure safe assembly and use of the bunk bed.
Preview Coaster Fine Furniture 460071(B1-B3) Twin/Twin Bunkbed Assembly Instructions
Detailed assembly instructions for the Coaster Fine Furniture 460071(B1-B3) Twin/Twin Bunkbed. Includes parts identification, hardware list, step-by-step assembly guide, and safety warnings.
Preview Coaster Fine Furniture 460332WHT(B1&B2) Twin Workstation Loft Bed Assembly Instructions
Detailed assembly instructions for the Coaster Fine Furniture 460332WHT(B1&B2) Twin Workstation Loft Bed. Includes parts identification, hardware list, step-by-step assembly guide, safety warnings, and mattress size information.