Waring Commercial BB900G 1/2 HP Chrome Bar Blender Instruction Manual

Introduction

Thank you for choosing the Waring Commercial BB900G Bar Blender. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new appliance. Please read all instructions thoroughly before initial use to ensure proper function and to prevent injury or damage.

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions before operating the blender.
• To protect against electrical hazards, do not immerse the blender base in water or other liquids.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.
• The use of attachments not recommended or sold by Waring may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Keep hands and utensils out of container while blending to prevent the possibility of severe injury to persons or damage to the blender. A scraper may be used, but only when the blender is not running.
• Always operate blender with cover in place.
• Ensure the blender is placed on a stable, level surface during operation.

Components and Features

Familiarize yourself with the main parts of your Waring Commercial BB900G Bar Blender:

• Motor Base: Heavy-duty zinc die-cast housing with a chrome-plated classic waterfall design, providing stability and motor protection.
• 40-Ounce Glass Container: Durable, dishwasher-safe glass jar for blending ingredients.
• Container Cover with Clear Cap: Securely seals the container during operation and allows for adding ingredients while blending.
• Blade Assembly: Integrated within the container for efficient blending.
• Toggle Switch: Three-position switch (OFF, LO, HI) located on the front of the base for easy operation.

Image: The complete Waring Commercial BB900G Bar Blender, showcasing its chrome base and 40-ounce glass container.

Image: Close-up view of the 40-ounce glass container, highlighting its capacity markings and durable construction.

Image: The chrome-plated base of the blender, featuring the classic waterfall design for stability and aesthetics.

Image: Detail of the control panel on the blender base, showing the three-position toggle switch for OFF, LO, and HI speed settings.

Setup and Assembly

Follow these steps to prepare your blender for first use:

1. Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or shipping.
2. Position the Base: Place the motor base on a clean, dry, and stable surface. Ensure there is adequate ventilation around the unit.
3. Assemble Container: Ensure the blade assembly is securely seated at the bottom of the 40-ounce glass container.
4. Place Container: Carefully place the assembled glass container onto the motor base. Ensure it is seated properly and stable.
5. Secure Cover: Place the container cover firmly onto the glass container. Ensure the clear cap is also in place.
6. Connect Power: Plug the blender into a grounded electrical outlet. Ensure the toggle switch is in the 'OFF' position before plugging in.

Operating Instructions

Blending Process

To operate your Waring Commercial BB900G Bar Blender:

1. Add Ingredients: Place desired ingredients into the 40-ounce glass container. Do not overfill beyond the maximum fill line.
2. Secure Cover: Place the container cover firmly onto the glass container. The clear cap can be removed to add ingredients during blending if necessary.
3. Position Container: Ensure the container is properly seated on the motor base.
4. Select Speed: Move the toggle switch to the desired speed setting: 'LO' for lower speed or 'HI' for higher speed. The switch is designed to be easy to locate even in dimly lit environments.
5. Blend: Allow the blender to operate until the desired consistency is achieved.
6. Turn Off: Once blending is complete, move the toggle switch to the 'OFF' position.
7. Remove Container: Carefully lift the container from the motor base.
8. Serve: Remove the cover and pour out the blended contents.

Speed Settings

• LO (Low Speed): Suitable for lighter blending tasks, mixing, or starting with larger ingredients.
• HI (High Speed): Provides maximum power for crushing ice, pureeing, and achieving smooth consistencies.

Maintenance and Cleaning

Regular cleaning and proper maintenance will ensure the longevity and optimal performance of your blender.

Daily Cleaning

1. Unplug: Always ensure the blender is unplugged from the power outlet before cleaning.
2. Disassemble: Remove the glass container and cover from the motor base.
3. Wash Container and Cover: The 40-ounce glass container and its cover are dishwasher-safe. Alternatively, wash them by hand with warm, soapy water. Rinse thoroughly and dry.
4. Clean Motor Base: Wipe the motor base with a damp cloth. Do not immerse the motor base in water or any other liquid. For stubborn spots, use a mild, non-abrasive cleaner.
5. Dry Thoroughly: Ensure all parts are completely dry before reassembling or storing the blender.

Storage

Store the blender in a clean, dry place when not in use. Ensure the container is clean and dry before placing it back on the base or storing separately.

Troubleshooting

If you encounter issues with your blender, refer to the following table for common problems and solutions:

If the problem persists after attempting these solutions, please contact Waring Commercial customer support.

Specifications

• Model: BB900G
• Motor: 1/2 HP
• Container Capacity: 40 Fluid Ounces (Glass)
• Dimensions (D x W x H): 7" x 8" x 16.5"
• Weight: 7.84 Pounds
• Electrical: 120-volt, 1.4-ampere, 50/60-hertz
• Certifications: UL, NSF
• Housing: Heavy-duty zinc die-cast, chrome-plated

Warranty and Support

The Waring Commercial BB900G Bar Blender comes with a limited two-year warranty against defects in material and workmanship from the date of purchase. This warranty covers parts and labor for repairs or replacement of the unit.

For warranty service, technical support, or to order replacement parts, please contact Waring Commercial customer service. Do not attempt to repair the appliance yourself, as this may void the warranty and pose safety risks. Always refer to authorized service facilities for any repairs.

Please retain your proof of purchase for warranty claims.