Introduction
This instruction manual provides detailed guidance for assembling the AMT #6731 ERTL #4 Kodak Film Olds 1/25 Scale Plastic Model Kit. This kit is designed for enthusiasts aged 13 and up and requires assembly. It features a highly detailed replica of the Kodak Film Olds racing car, including authentic decals, a complete racing chassis, a detailed interior, and a 358 cu. in. engine.
Assembly Instructions
Before beginning assembly, ensure you have all necessary tools, such as plastic model cement, hobby knife, sandpaper, and paints (not included). Carefully read all instructions and identify all parts before starting.
Kit Components and Features:
- Authentic Racing and Sponsorship Decals: Apply these carefully to replicate the original Kodak Film Olds livery.
- Complete Racing Chassis and Suspension: Assemble the chassis components first, ensuring proper alignment for a stable base.
- Completely Detailed Interior: Construct the cockpit, including the seat, dashboard, and roll cage, paying attention to small details.
- Detailed 358 cu. in. Engine: Assemble the engine components, which can be painted for added realism.
Follow the step-by-step diagrams provided within the kit packaging for precise assembly. Allow adequate drying time for all glued parts before proceeding to the next step.
Figure 1: Front packaging of the AMT #6731 Kodak Film Olds model kit, illustrating the finished car.
Figure 2: Side view of the model kit packaging, showcasing the car's design.
Figure 3: Rear packaging of the model kit, highlighting key features and components.
Display and Handling
Once assembled, your AMT Kodak Film Olds model is intended for display. Handle the model with care to prevent damage to delicate parts, such as mirrors, spoilers, and antennas. Avoid exposing the model to direct sunlight or extreme temperatures, which can cause decals to fade or plastic to warp.
Care and Maintenance
To keep your model in pristine condition, dust it regularly with a soft, dry brush or a microfiber cloth. For more stubborn dust or smudges, lightly dampen a cloth with water (avoiding harsh chemicals) and gently wipe the surface. Ensure the model is completely dry before returning it to display.
Troubleshooting Common Assembly Issues
- Parts Not Fitting: Ensure you are using the correct parts for each step. Sometimes, a small amount of sanding or trimming with a hobby knife may be required for a perfect fit.
- Decal Application Issues: If decals are not adhering properly, ensure the surface is clean and smooth. Use decal setting solutions for better adhesion and to conform to irregular surfaces.
- Glue Marks: Apply plastic cement sparingly. If excess glue appears, allow it to dry completely, then carefully remove it with a hobby knife or fine-grit sandpaper, if possible, without damaging the surrounding area.
- Missing Parts: Double-check the kit contents against the parts list in the instruction booklet. If a part is genuinely missing, contact the manufacturer's customer support.
Product Specifications
| Model Number: | 6731 |
| Brand: | AMT/Ertl |
| Scale: | 1/25 |
| Product Dimensions: | 9.4 x 6.7 x 3.8 inches |
| Item Weight: | 13.8 ounces |
| Recommended Age: | 13 years and up |
| Date First Available: | October 2, 2003 |
Warranty Information
This product is a plastic model kit and typically does not come with an explicit warranty for assembled parts. For issues related to manufacturing defects or missing components upon initial purchase, please refer to the manufacturer's policy or contact their customer support within a reasonable timeframe after purchase.
Customer Support
For further assistance, questions regarding assembly, or to report missing/defective parts, please contact AMT/Ertl customer service. Refer to the contact information provided on the product packaging or visit the official AMT website for support details.
Note: As this is a model kit, technical support primarily covers manufacturing defects of un-assembled components.
