Eaz-Lift Elite Weight Distribution Hitch User Manual

Introduction

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your Eaz-Lift Elite Weight Distribution Hitch. Designed to enhance towing stability and safety, this hitch system distributes weight evenly across your tow vehicle and trailer axles, resulting in a smoother and more controlled towing experience. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Product Overview and Components

The Eaz-Lift Elite Weight Distribution Hitch is engineered with features to simplify setup and improve towing dynamics.

Key Features:

• Weight Distribution: Designed to provide trailers with a smoother ride by distributing tongue weight.
• Universal Spring Bars: Round spring bars are interchangeable and can be used on either side of the hitch, operating with a positive latching action.
• Pre-Installed Components: U-bolts and chain package are pre-installed on the spring bars for quicker setup.
• Adjustable Shank: Includes a height-adjustable forged shank for precise leveling.
• High Capacity: Maximum Tongue Weight of 1,000 lb. and Maximum Gross Weight Rating of 10,000 lb.

What's Included:

• Hook-up brackets
• Spring bars
• Chains
• Ball mount
• Shank
• Hitch pin, clip, and bolt package for adjustable hitches

Figure 1: Eaz-Lift Elite Weight Distribution Hitch components.

Figure 2: Key features and specifications of the Eaz-Lift Elite Weight Distribution Hitch.

Figure 3: Detailed view of included product components.

Setup and Installation

Proper installation is crucial for the safe and effective operation of your weight distribution hitch. For detailed, step-by-step instructions, please refer to the official Installation Manual (PDF). Below are general guidelines and important considerations.

General Installation Steps:

1. Attach Shank and Ball Mount: Secure the ball mount to the height-adjustable forged shank. Ensure all bolts are properly tightened using a torque wrench to the manufacturer's specifications. The main bolt goes in the bottom, and the top bolt allows for adjustment of the ball angle.
2. Install Sway Bar Ball (if applicable): If using a sway bar control, ensure the sway bar ball is installed in the correct location on the trailer frame. Incorrect placement can lead to damage during tight turns. All six bolts must be used to secure this ball.
3. Connect Spring Bars: The universal round spring bars attach to the ball mount. They are designed to be interchangeable for convenience.
4. Engage Chains: Connect the chains from the spring bars to the hook-up brackets on the trailer frame. Use the included breaker bar to lift and torque the chains into place, then secure with the pin.
5. Adjust for Leveling: Adjust the hitch to ensure the tow vehicle and trailer are level. This redistributes tongue weight for a smoother ride.

Figure 4: Proper hitch adjustment ensures a level tow vehicle and trailer.

Operating the Hitch

Once installed and properly adjusted, the Eaz-Lift Elite Weight Distribution Hitch will work to provide a stable towing experience. Always ensure all connections are secure before beginning your journey.

Towing Considerations:

• Regularly check all bolts and connections for tightness, especially after the first few towing trips.
• Ensure the spring bars are properly engaged and secured with the pins before each use.
• Drive cautiously, especially in windy conditions or when passing large vehicles, as the hitch helps but does not eliminate all sway.

Figure 5: Visual representation of leveling control provided by the hitch.

Maintenance

To ensure the longevity and continued performance of your Eaz-Lift Elite Weight Distribution Hitch, regular maintenance is recommended.

• Lubrication: Periodically apply grease to the grease fittings on the hitch head, particularly where the spring bars pivot. This reduces friction and noise.
• Inspection: Before each trip, inspect all components for signs of wear, damage, or corrosion. Pay close attention to the spring bars, chains, bolts, and the hitch ball.
• Cleaning: Clean the hitch components regularly, especially after exposure to dirt, salt, or harsh weather conditions. A powder-coated finish helps with corrosion resistance.
• Storage: When not in use, store the hitch in a dry, protected area to prevent rust and damage.

Troubleshooting

This section addresses common issues you might encounter with your weight distribution hitch.

Issue: Sway Bar Damage During Turns

Symptom: The sway bar or its attachment point on the trailer frame shows signs of bending or breaking, particularly after making tight turns.

Possible Cause: The sway bar ball is mounted too close to the hitch head on the trailer frame. During sharp turns, the sway bar can bottom out against the hitch, causing excessive stress and damage.

Solution: Ensure the sway bar ball is mounted at an appropriate distance from the hitch head, allowing sufficient clearance for full articulation during turns. Refer to the installation manual for recommended placement. If damage has occurred, replace the affected components immediately.

Issue: Uneven Towing or Sagging

Symptom: The tow vehicle's rear sags, or the trailer's nose points upwards/downwards, indicating improper weight distribution.

Possible Cause: Incorrect adjustment of the spring bars or the ball mount angle.

Solution: Re-adjust the spring bars and the ball mount angle. The goal is to achieve a level stance for both the tow vehicle and the trailer. This often involves adjusting the number of chain links engaged or the tilt of the ball mount. Consult the installation manual for detailed adjustment procedures.

Specifications

Warranty and Support

Eaz-Lift products are manufactured by Camco, a company known for quality outdoor products. For specific warranty information, please refer to the documentation included with your purchase or contact Camco customer support directly. General customer support is available for product inquiries and assistance.

• Customer Support: For assistance, please visit the Eaz-Lift Store on Amazon or refer to the contact information provided in your product packaging.
• Returns: This product typically includes a 30-day easy returns policy.