Eaz-Lift Elite Weight Distribution Hitch

Introduction

The Eaz-Lift Elite Weight Distribution Hitch with Height Adjustable Forged Shank is engineered to enhance your towing experience by providing a smoother ride and improved stability. This manual provides essential information for the proper setup, operation, and maintenance of your hitch, ensuring safe and efficient use.

Figure 1: Overview of the Eaz-Lift Elite Weight Distribution Hitch, showing the main hitch assembly and spring bars.

Figure 2: Diagram highlighting key features such as steel spring bars, smoother ride, and maximum tongue weight.

Safety Information

Always prioritize safety when installing, operating, or maintaining your weight distribution hitch. Refer to your vehicle and trailer owner's manuals for specific towing capacities and recommendations. Ensure all components are correctly installed and torqued to specifications before each use. Overloading can lead to serious accidents.

Components List

The Eaz-Lift Elite Weight Distribution Hitch (Model 48053) includes the following parts:

• Height adjustable forged shank
• Hook-up brackets
• Spring bars (universal round design)
• Chains
• Ball mount
• Hitch pin and clip
• Bolt package for adjustable hitches

Figure 3: Visual representation of all components included with the hitch system.

Setup and Installation

Proper installation is crucial for the performance and safety of your weight distribution hitch. While this manual provides general guidance, it is highly recommended to consult the official Installation Manual (PDF) for detailed, step-by-step instructions and diagrams specific to your model.

Key Installation Points:

1. Shank Adjustment: The height adjustable forged shank allows for proper leveling of your tow vehicle and trailer. Ensure the main bolt is securely fastened at the bottom, and the top bolt is adjusted to achieve the correct ball angle.
2. Sway Control Ball (Optional): If using a sway control device, ensure the sway control ball is mounted in the correct location on the trailer frame. Incorrect placement can cause the sway bar to bottom out during tight turns, potentially damaging the system.
3. Spring Bar Attachment: The U-bolts and chain package are pre-installed on the spring bars for convenience. Attach the spring bars to the ball mount, ensuring the locking device engages with a positive latching action.
4. Chain Tensioning: Use the included breaker bar to lift and tension the chains onto the hook-up brackets. Secure with the hitch pin to prevent accidental release.

Figure 4: The adjustable shank allows for precise height and angle adjustments to optimize towing performance.

Operating the Hitch

The Eaz-Lift Elite Weight Distribution Hitch is designed to distribute the tongue weight of your trailer more evenly across the axles of both your tow vehicle and trailer. This results in improved handling, braking, and overall stability, especially with heavier loads.

Weight Distribution Principle:

By applying tension to the spring bars, the hitch leverages the trailer's tongue weight to lift the rear of the tow vehicle and transfer weight to the front axle of the tow vehicle and the axles of the trailer. This restores proper vehicle geometry and improves control.

Figure 5: Illustration demonstrating how the weight distribution hitch levels the tow vehicle and redistributes tongue weight for improved stability.

Universal round spring bars are interchangeable and can be used on either side of the hitch. The positive latching action ensures secure engagement when pushed into the ball mount.

Maintenance

Regular maintenance will prolong the life and ensure the safe operation of your Eaz-Lift Elite Weight Distribution Hitch.

• Lubrication: Periodically lubricate the pivot points of the hitch head and the spring bar connections. A grease fitting is provided for easy lubrication, reducing noise and premature wear.
• Inspection: Before each towing trip, inspect all bolts, pins, and chains for tightness, wear, or damage. Ensure the powder-coated finish is intact to prevent corrosion.
• Cleaning: Clean the hitch components regularly, especially after exposure to dirt, salt, or harsh weather conditions.

Troubleshooting

If you encounter issues with your Eaz-Lift Elite Weight Distribution Hitch, consider the following common problems and solutions:

• Excessive Sway: Ensure the sway control device (if installed) is properly adjusted and engaged. Verify correct tongue weight and overall trailer loading.
• Uneven Leveling: Re-check the shank height and ball angle adjustments. Ensure spring bars are correctly tensioned and chains are equally adjusted on both sides.
• Noise from Hitch: Lubricate all pivot points and spring bar connections. Ensure all bolts are properly torqued.
• Difficulty Engaging/Disengaging Spring Bars: Ensure the trailer jack is used to lift the trailer and tow vehicle slightly, relieving tension on the spring bars before attempting to engage or disengage.

Specifications

Warranty and Support

Eaz-Lift products are manufactured by Camco, a company with a long-standing reputation for quality and customer satisfaction since 1966. For any questions, technical assistance, or support regarding your Eaz-Lift Elite Weight Distribution Hitch, please refer to the official Camco website or contact their customer support directly. Keep your purchase receipt for warranty claims.

For additional resources, you may visit the Eaz-Lift Store on Amazon.