Oregon 110266

Oregon Nylium Starline Trimmer Line

Instruction Manual

1. Product Overview

The Oregon Nylium Starline Trimmer Line is a premium co-polymer material designed for efficient and durable trimming. This manual provides essential information for its proper use and maintenance.

Oregon Nylium Starline Blue String Trimmer Line 0.065-Inch Diameter 1-Pound Donut

Image: A 1-pound donut of Oregon Nylium Starline blue string trimmer line, showing the product packaging with brand name, "Nylium Starline", and product specifications like "Premium Monofilament Trimmer Line". The line is coiled neatly inside clear plastic packaging.

Key Features:

  • Premium co-polymer material for enhanced durability.
  • Commercial grade performance.
  • Distinctive blue color.
  • 0.065-inch diameter, suitable for various trimming tasks.
  • Supplied as a 1-pound donut, containing approximately 575 feet of line.

2. Setup and Installation

This trimmer line is designed for use with string trimmers that support a 0.065-inch diameter line. Always consult your trimmer's owner's manual for specific line installation instructions.

  1. Safety First: Before handling the trimmer line or performing any installation, ensure your string trimmer is turned off and disconnected from its power source (unplugged for electric, spark plug cap removed for gas).
  2. Identify Spool Type: Determine if your trimmer uses a single-line or dual-line spool.
  3. Remove Old Line (if applicable): If replacing existing line, carefully remove any remaining old line from the spool.
  4. Measure and Cut: Refer to your trimmer's manual for the recommended length of line. Cut the Oregon Nylium Starline to the specified length.
  5. Wind the Line: Follow your trimmer's specific winding instructions. Most spools have arrows indicating the winding direction. Wind the line tightly and evenly onto the spool to prevent tangles and ensure smooth feeding. Avoid overlapping the line excessively.
  6. Reinstall Spool: Place the wound spool back into the trimmer head, ensuring it clicks securely into place.
  7. Test: Briefly power on the trimmer (safely) to ensure the line feeds correctly.

Note: Improper winding can lead to line jamming or premature breakage.

3. Operating Instructions

Once installed, the Oregon Nylium Starline is ready for use. Always wear appropriate personal protective equipment (PPE) including eye protection, long pants, and sturdy footwear when operating a string trimmer.

  • Starting the Trimmer: Follow your trimmer's manufacturer instructions for starting.
  • Trimming Technique: Use a sweeping motion, keeping the trimmer head level with the ground. Avoid hitting hard surfaces like concrete, rocks, or fences, as this can cause rapid line wear or breakage.
  • Line Advancement: This line is designed to advance smoothly. If your trimmer has an automatic feed, it will advance as needed. For manual feed systems, tap the trimmer head gently on the ground while the trimmer is running to advance the line.
  • Optimal Performance: The 5-sided shape of the Nylium Starline is designed for fast and clean cutting. Maintain a consistent RPM for best results.

4. Maintenance and Storage

Proper maintenance and storage will extend the life of your Oregon Nylium Starline trimmer line.

  • Keep Clean: After use, ensure the trimmer head and line are free from debris, grass clippings, and dirt.
  • Avoid Extreme Temperatures: Store the trimmer line in a cool, dry place, away from direct sunlight and extreme temperatures. High heat can cause the line to become brittle, leading to increased breakage.
  • Prevent Drying Out: Some users find that soaking the line in water for 24 hours before use can improve flexibility and reduce breakage, especially if the line has been stored for a long time in dry conditions.
  • Inspect Regularly: Before each use, inspect the line for any signs of damage, fraying, or excessive wear. Replace if necessary.

5. Troubleshooting

ProblemPossible CauseSolution
Line breaks frequently
  • Hitting hard objects (rocks, concrete).
  • Line is old or brittle (stored in heat/dryness).
  • Incorrect line diameter for trimmer.
  • Improper winding on spool.
  • Avoid contact with hard surfaces.
  • Store line properly; consider soaking in water before use.
  • Ensure 0.065-inch diameter is correct for your trimmer.
  • Rewind spool carefully, ensuring even tension and no overlaps.
Line jams in trimmer head
  • Improper winding (loose or overlapping).
  • Debris inside trimmer head.
  • Line welding (due to heat/friction).
  • Rewind line tightly and evenly.
  • Clean trimmer head thoroughly.
  • Ensure line is not excessively long for the spool.
Line does not feed
  • Spool is empty or nearly empty.
  • Line is tangled or stuck.
  • Trimmer head mechanism issue.
  • Replace line.
  • Inspect and untangle line; re-wind if necessary.
  • Consult your trimmer's manual or a service professional.

6. Specifications

AttributeDetail
BrandOregon
Model Number110266
Product NameNylium Starline Blue String Trimmer Line
Diameter0.065-inch
Weight1-pound donut
LengthApproximately 575 feet
MaterialPremium Co-polymer with Nylium aluminum-particle additives
Shape5-sided (Starline)
ColorBlue
UPC0365774244518

7. Warranty and Support

For specific warranty information regarding the Oregon Nylium Starline Trimmer Line, please refer to the product packaging or contact Oregon customer support directly.

You can find more information and contact details on the official Oregon website or by visiting the Oregon Store on Amazon.

© 2024 Oregon. All rights reserved. Model: 110266

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.