Introduction
The KMD Xbox 360 Wired Pro Gamer Headset is designed to enhance your gaming experience on the Xbox 360 console. This headset provides clear audio communication and features an adjustable boom microphone, noise reduction capabilities, and independent volume and mute controls. It connects directly to your Xbox 360 controller, offering a reliable and comfortable solution for in-game chat and audio.
Image: KMD Xbox 360 Wired Pro Gamer Headset, featuring its white design and adjustable microphone.
Package Contents
Please check the package for the following items:
- KMD Xbox 360 Wired Pro Gamer Headset
- Integrated Cable with 3.5 mm Jack
Setup
- Locate the Headset Port: On your Xbox 360 controller, identify the 3.5 mm headset jack, typically located at the bottom edge.
- Connect the Headset: Insert the 3.5 mm jack of the KMD Pro Gamer Headset firmly into the headset port on your Xbox 360 controller. Ensure a secure connection to prevent audio interruptions.
- Power On: Turn on your Xbox 360 console and controller. The headset should now be ready for use with Xbox Live Voice Communication & Chat.
Operating Instructions
Volume Control
The headset features an independent volume control. Locate the volume dial or buttons on the headset's inline control unit. Rotate the dial or press the buttons to adjust the incoming audio volume to your preferred level.
Mute Function
To mute your microphone, locate the mute switch on the inline control unit. Toggle the switch to the 'Mute' position. Toggle it back to unmute your microphone.
Adjusting the Boom Microphone
The headset is equipped with an adjustable boom microphone. Gently bend the microphone arm to position it optimally near your mouth for clear voice transmission. Avoid bending the arm excessively or with force to prevent damage.
Features
- Designed for Xbox 360 games utilizing Xbox Live Voice Communication & Chat.
- Audiophile-quality noise reduction for clear audio.
- Independent volume control for personalized audio levels.
- Mute control for the microphone.
- Adjustable boom microphone for optimal voice pickup.
- Ergonomically designed ear pads for comfort during extended use.
- Shielded cable for signal integrity.
- Plugs directly into the Xbox 360 controller.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the headset. Do not use liquid cleaners or abrasive materials.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Avoid sharp bends or kinks in the cable. Do not pull on the cable to disconnect the headset.
Troubleshooting
No Audio or Low Volume
- Ensure the headset's 3.5 mm jack is fully inserted into the controller.
- Check the headset's inline volume control and adjust it to a higher level.
- Verify that the Xbox 360 console's audio settings are configured correctly for headset output.
Microphone Not Working
- Ensure the microphone mute switch on the inline control is in the 'Unmute' position.
- Check the microphone's position; ensure it is properly aligned towards your mouth.
- Confirm that your Xbox Live privacy and communication settings allow voice chat.
Static or Poor Audio Quality
- Ensure the connection to the controller is secure and free from debris.
- Avoid placing the cable near sources of electromagnetic interference.
- Test the headset with another controller or console if possible to rule out a device issue.
Specifications
| Headphones Jack | 3.5 mm Jack |
| Connectivity Technology | Wired |
| Compatible Devices | Xbox 360 |
| Control Type | Volume Control |
| Special Feature | Microphone Included, Noise Cancellation |
| Ear Placement | Over Ear |
| Noise Control | Sound Isolation |
| Item Weight | 3.2 ounces |
| Product Dimensions | 7 x 6.5 x 7.75 inches |
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official KMD website. Keep your proof of purchase for any warranty claims.