Busch-Jaeger 1795-84 Cover for Temperature Controller 1095 U - Instruction Manual

Introduction

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Busch-Jaeger 1795-84 cover. This cover is specifically designed for use with Busch-Jaeger thermostat models 1095 U, 1096 U, and 1095 Uf. Please read this manual thoroughly before proceeding with installation or operation to ensure correct usage and optimal performance.

Product Overview

The Busch-Jaeger 1795-84 is a faceplate designed to fit over compatible Busch-Jaeger temperature controllers. It features a rotary dial for temperature adjustment and a sliding switch for selecting operating modes.

Figure 1: Front view of the Busch-Jaeger 1795-84 cover. It displays a central rotary dial with numerical markings from 1 to 6, and a horizontal sliding switch at the top right. The sliding switch has three positions, indicated by symbols: a crescent moon (night mode), a sun (day mode), and a clock (timed mode). A small black indicator light is visible on the top left.

Key Components:

• Rotary Dial: Used to set the desired temperature level.
• Sliding Switch: Controls the operating mode, including night setback.
• Indicator Light: (If applicable, based on image) May indicate power or operation status.

Features

• Designed for use with compatible Busch-Jaeger thermostats (1095 U, 1096 U, 1095 Uf).
• Includes a sliding switch for night setback functionality.
• Flush mounting design for seamless integration.

Setup and Installation

This product is a cover (faceplate) and requires a compatible Busch-Jaeger temperature controller (models 1095 U, 1096 U, or 1095 Uf) for full functionality. Installation should be performed by a qualified electrician if you are unsure about electrical wiring procedures.

1. Safety First: Ensure the power supply to the thermostat circuit is turned off at the main breaker before beginning any installation work.
2. Prepare the Thermostat: Ensure the compatible Busch-Jaeger thermostat unit (e.g., 1095 U) is correctly installed and wired according to its own instruction manual.
3. Attach the Cover: Carefully align the 1795-84 cover with the thermostat unit. Gently press the cover into place until it clicks securely. Ensure all components, such as the rotary dial and sliding switch, align correctly with the underlying thermostat mechanisms.
4. Verify Fit: Check that the cover is flush with the wall and securely attached.
5. Restore Power: Once the cover is securely installed, restore power to the circuit at the main breaker.

For detailed wiring instructions, refer to the manual provided with your specific Busch-Jaeger thermostat model.

Operating Instructions

The 1795-84 cover provides intuitive controls for your compatible Busch-Jaeger thermostat.

1. Setting the Temperature (Rotary Dial):

• Rotate the central dial clockwise to increase the desired temperature setting.
• Rotate the central dial counter-clockwise to decrease the desired temperature setting.
• The numerical markings (1-6) on the dial correspond to different temperature levels. Refer to your thermostat's manual for the exact temperature range associated with each number.

2. Selecting Operating Mode (Sliding Switch):

The sliding switch allows you to select between different operating modes, including night setback.

• Crescent Moon Symbol (Night Mode): Slide the switch to this position for night setback. This typically lowers the temperature to an energy-saving level during nighttime hours.
• Sun Symbol (Day Mode): Slide the switch to this position for normal daytime operation, maintaining the temperature set by the rotary dial.
• Clock Symbol (Timed Mode): Slide the switch to this position to activate any programmed schedules or timed operations set on the underlying thermostat.

The exact temperature values for night setback and the functionality of the timed mode are determined by the specific Busch-Jaeger thermostat model installed underneath this cover. Consult your thermostat's manual for detailed programming and temperature settings.

Maintenance

The Busch-Jaeger 1795-84 cover requires minimal maintenance.

• Cleaning: To clean the surface of the cover, use a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Inspection: Periodically check the cover for any signs of damage or loose fitting.

Ensure the power is off before performing any cleaning that involves removing the cover.

Troubleshooting

As the 1795-84 is a cover, most operational issues will stem from the underlying thermostat unit. However, here are some basic troubleshooting steps related to the cover itself:

• Cover Does Not Fit:
  • Verify that your thermostat model is one of the compatible units (1095 U, 1096 U, or 1095 Uf).
  • Ensure the thermostat unit is correctly installed and flush with the wall.
  • Check for any obstructions preventing the cover from seating properly.
• Rotary Dial or Sliding Switch Not Functioning:
  • Ensure the cover is correctly aligned and securely attached to the thermostat unit. Misalignment can prevent the controls from engaging properly.
  • If the issue persists, the problem likely lies with the underlying thermostat unit. Refer to the thermostat's instruction manual for further troubleshooting.

If you encounter persistent issues, contact a qualified electrician or Busch-Jaeger customer support.

Specifications

Warranty and Support

Warranty information for the Busch-Jaeger 1795-84 cover is typically provided with the main thermostat unit or can be obtained directly from the manufacturer, Busch-Jaeger. Please retain your proof of purchase for warranty claims.

For technical support, product inquiries, or service, please contact Busch-Jaeger customer service or visit their official website. Contact details are usually available on the manufacturer's packaging or website.