Important Safety Instructions
Burn hazard: Surfaces get extremely hot during use. Avoid contact with skin. Electric shock risk: Keep away from water. Do not use near bathtubs, sinks, or other water sources. Fire risk: Unplug when not in use. Do not leave unattended when plugged in. Keep out of reach of children.
Product Overview
The Hot Tools 1 1/4 Inch Salon Curling Iron/Wand 1110 is designed for creating various hair styles, from loose waves to defined curls. It features a 24K gold-plated barrel for even heat distribution and consistent results. The iron is equipped with an extra-long cool tip for safe handling and a powerful spring clamp to secure hair during styling. An 8-foot swivel cord provides flexibility and ease of use, preventing tangles. The separate on/off switch allows the rheostat to memorize your preferred heat setting, and a pilot light indicates when the iron is powered on.
Setup
- Unpack: Carefully remove the curling iron from its packaging.
- Inspect: Check the appliance for any signs of damage. Do not use if damaged.
- Placement: Place the curling iron on a heat-resistant surface, utilizing the foldaway safety stand to prevent the hot barrel from touching surfaces.
- Plug In: Insert the power cord into a standard electrical outlet (120VAC, 60Hz). Ensure your hands are dry before plugging in the appliance.
Operating Instructions
- Power On: Slide the ON/OFF switch to the 'ON' position. The pilot light will illuminate.
- Select Temperature: Rotate the temperature control dial to your desired heat setting. The iron offers a range from 280°F to 430°F. For most hair types, a setting between 330°F and 380°F is recommended. Allow a few moments for the iron to reach the selected temperature.
- Prepare Hair: Ensure hair is clean, dry, and detangled. For best results and heat protection, apply a heat protectant spray.
- Section Hair: Divide your hair into manageable sections, typically 1-2 inches wide.
- Curl:
- Using the Clamp: Open the clamp, place a section of hair between the clamp and the barrel, and close the clamp. Wrap the hair around the barrel, away from your face, ensuring the ends are securely held. Hold for 5-10 seconds, then release the clamp and gently slide the iron out.
- Using as a Wand (without clamp): Wrap a section of hair around the barrel, starting from the root and working towards the tip, leaving the ends out if desired for a more natural look. Hold for 5-10 seconds, then gently unwrap the hair.
- Cool Down: Allow curls to cool completely before styling further to set the shape.
- Power Off: After use, slide the ON/OFF switch to the 'OFF' position and unplug the appliance from the outlet. Allow the iron to cool down completely before storing.
Maintenance
- Cleaning: Ensure the curling iron is unplugged and completely cool before cleaning. Wipe the barrel and handle with a soft, damp cloth. Do not use abrasive cleaners or immerse the appliance in water.
- Storage: Store the cooled curling iron in a safe, dry place, away from children. Do not wrap the cord tightly around the appliance, as this can damage the cord.
Troubleshooting
- Iron Not Heating:
- Ensure the power cord is securely plugged into a working electrical outlet.
- Check that the ON/OFF switch is in the 'ON' position.
- Verify the temperature dial is set to a heat setting.
- Curls Not Holding:
- Ensure hair is completely dry before curling.
- Increase the temperature setting slightly (within safe limits for your hair type).
- Hold the hair on the barrel for a few more seconds.
- Allow curls to cool completely before touching or styling them.
- Consider using a styling product designed to enhance curl hold.
- Hair Snagging:
- Ensure hair is thoroughly detangled before use.
- Take smaller, more manageable sections of hair.
- Check for any debris or product buildup on the barrel that might be causing friction.
Specifications
The following are the technical specifications for the Hot Tools 1 1/4 Inch Salon Curling Iron/Wand 1110:
- Model Number: HT1110
- Barrel Size: 1.25 inches (1 1/4 Inch)
- Barrel Material: 24K Gold-plated Stainless Steel
- Power Source: Corded Electric
- Voltage: 120VAC, 60Hz, 0.71A
- Max Temperature Setting: 430°F (221°C)
- Product Dimensions: 15.25 x 2 x 4.75 inches
- Item Weight: 1.2 Pounds
- Cord Length: 8 feet (Swivel Cord)
- Safety Features: Extra-long Cool Tip, Foldaway Safety Stand, Pilot Light
- Certifications: ETL Listed (Intertek Conforms to ANSI/UL STD.859 2001645)
Warranty and Support
This Hot Tools product is covered by the manufacturer's warranty. For specific warranty details, registration, or technical support, please refer to the documentation included with your purchase or visit the official HOT TOOLS website. You may also contact customer service for assistance with product inquiries or service needs.
