Introduction
Thank you for choosing the WBM Himalayan Salt Lamp. Crafted from 100% natural Himalayan salt crystals, this lamp provides a warm, inviting glow and is believed to offer air-purifying benefits. Each lamp is uniquely carved, ensuring a distinctive piece for your home or office. This manual will guide you through the proper setup, operation, and care to ensure you get the most out of your salt lamp.
Product Overview
Your WBM Himalayan Salt Lamp comes with the following components:
- Himalayan Salt Crystal: The main body of the lamp, hand-carved from natural salt.
- Wooden Base: A sturdy and elegant base that supports the salt crystal.
- LED Bulb: An energy-efficient LED bulb designed for long-lasting illumination.
- USB Power Cable with Touch Dimmer Control: Allows for easy power on/off and brightness adjustment.
Illustration of the salt lamp's key components: the LED bulb, E12 base, USB power adapter, and dimmer switch.
Setup Instructions
Follow these steps to set up your Himalayan Salt Lamp:
- Unpack: Carefully remove all components from the packaging.
- Inspect: Check the salt crystal and wooden base for any damage.
- Insert Bulb: Gently insert the LED bulb into the bulb holder located within the wooden base. Ensure it is securely seated.
- Place Crystal: Carefully place the salt crystal onto the wooden base, aligning it so the bulb is centered within the crystal's cavity.
- Connect Power: Plug the USB end of the power cable into a compatible USB power source (e.g., computer USB port, USB wall adapter, power bank).
Visual guide for inserting the LED bulb into the lamp's wooden base.
Operating Instructions
Your WBM Himalayan Salt Lamp features a convenient touch dimmer control:
- Power On/Off: Tap the power symbol on the dimmer control once to turn the lamp on or off.
- Adjust Brightness: Once the lamp is on, press and hold the power symbol on the dimmer control. The brightness will gradually increase or decrease. Release your finger when you reach your desired brightness level.
A hand operating the touch dimmer control on the lamp's USB cable to adjust brightness.
The salt lamp provides a relaxing ambiance, ideal for meditation or creating a calming environment.
Maintenance
Proper care will ensure the longevity and effectiveness of your salt lamp:
- Cleaning: To clean the lamp, gently wipe the salt surface with a dry or slightly damp cloth. Do not use excessive water or immerse the lamp in liquid.
- Moisture: Salt lamps are hygroscopic, meaning they absorb moisture from the air. In humid environments, the lamp may appear to 'sweat'. Place a coaster or mat underneath to protect furniture. If sweating occurs, turn the lamp on for a few hours to dry it out.
- Bulb Replacement: If the LED bulb needs replacement, ensure the lamp is unplugged. Carefully remove the salt crystal from the base, unscrew the old bulb, and screw in a new compatible LED bulb (E12 base, 15 watts recommended).
- Storage: If storing the lamp for an extended period, wrap it in a plastic bag or airtight container to protect it from moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. | No power, loose connection, faulty bulb. | Ensure USB cable is securely plugged in. Try a different USB port or adapter. Check if the bulb is properly seated or needs replacement. |
| Lamp is 'sweating' or dripping water. | High humidity. | This is normal in humid conditions. Keep the lamp on for several hours to dry it out. Place a protective mat underneath. Avoid placing in high-humidity areas like bathrooms. |
| Brightness cannot be adjusted. | Dimmer malfunction. | Ensure you are pressing and holding the touch control. If the issue persists, the dimmer unit may be faulty and require replacement. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 1002 |
| Material | Natural Himalayan Salt Crystal |
| Base Material | Wood |
| Product Dimensions | 5"D x 5"W x 9"H |
| Item Weight | 6 Pounds (approx. 5-7 lbs) |
| Light Source Type | LED |
| Wattage | 15 watts |
| Voltage | 120 Volts |
| Switch Type | Touch Dimmer Control |
| Cable Length | 72 Inches |
| Power Source | USB Corded Electric |
| Indoor/Outdoor Usage | Indoor Only |
| Assembly Required | Yes (minor) |
| Certifications | UL, ETL |
Warranty & Support
Warranty Information
WBM LLC warrants its products to be free from defects in material and workmanship for 30 days from the shipment date unless otherwise noted. WBM LLC will replace any item returned within the parameters of this policy and found to be defective. All returned warranty-issue merchandise must be properly packed for a safe return shipment and in original purchase condition with the original packaging, the original receipt/invoice/packing slip, and an explanation of the item's problem. WBM LLC will not refund, credit, or cover shipping expenses for warranty item returns or warranty item replacements under any circumstances. WBM LLC is not liable for misuse of its products. This warranty does not cover damage due to abuse, neglect, alteration, failure to follow instructions, shipping damage, or damaged packaging. WBM LLC expressly disclaims all express warranties not stated herein and all implied warranties, including the implied warranties of merchantability and fitness for a particular purpose.
Customer Support
For any questions, concerns, or technical assistance not covered in this manual, please refer to the contact information provided with your product packaging or visit the official Himalayan Glow website for support resources.
